Secondary 4 G3 Physics vocabulary helps students turn a question into a physical model, choose a useful relationship and explain an answer precisely. This guide teaches 100 words and key terms for small-group learning and independent revision, with meanings, original examples and common mistakes. It is written for students preparing for the 2027 Singapore–Cambridge Secondary Education Certificate (SEC) G3 Physics syllabus K323 and for parents who want to understand what their child is trying to say.
Begin with the words that appear in your recent corrections: perhaps resultant, potential difference, determine or gradient. Learn each through a situation, a quantity or a diagram, then use it in a fresh answer. These 100 entries are eduKate’s teaching selection, including essential multiword terms; they are not an official SEAB word list or an examination prediction. Vocabulary supports calculation, practical reasoning and conceptual understanding, and works best when all three are practised together.
- Who this helps: students revising G3 Physics across the examined course, including foundations introduced before Secondary 4.
- What you receive: exactly 100 numbered entries, grouped by purpose, with examples and checks.
- Curriculum reference: 2027 SEC G3 Physics K323, the separate Physics subject.
- Learning sequence: explain the meaning, recognise the situation, apply the relationship and check the answer.
- Small-group use: three learners can rotate between explaining, applying and checking, with individual written work.
- Parent starting point: ask for one accurate explanation and one new example, then identify the next small correction.
eduKateSingapore · Secondary 4 G3 Physics
Find your next learning step
Choose one route, or open the chapter index to return to a particular group of words.
Full chapter index · Try the diagnostic · Vocabulary learning system
Chapter index
Understand the task
The 100 words
- Words 1–10: Read what the question asks you to do
- Words 11–20: Give quantities a clear meaning
- Words 21–30: Connect motion to forces
- Words 31–40: Explain turning, balance and pressure
- Words 41–50: Account for energy and temperature changes
- Words 51–60: Explain thermal processes through particles
- Words 61–70: Describe waves and light accurately
- Words 71–80: Explain electrical quantities and circuit behaviour
- Words 81–90: Understand fields, induction and radioactivity
- Words 91–100: Turn practical observations into justified conclusions
Practice and next steps
CHAPTER 1 OF 16 · Understand the course
1. Use the right syllabus and the right learning target
Back to contentsThe SEAB 2027 G3 syllabus index identifies separate Physics as K323. Combined Science combinations have their own codes and content boundaries. Some words here help both routes, but a student taking combined Science should use the registered combination’s syllabus when deciding the required depth.
The K323 syllabus includes measurement, mechanics, thermal physics, waves, electricity and magnetism, and radioactivity. It also assesses practical thinking and the use of information. Its command-word glossary is sensitive to context: read the whole question and the mark allocation. A definition alone will not answer every question containing a familiar term.
The SEC begins in 2027. Students sitting an examination in 2026 should follow their own registered syllabus. Under MOE’s Full Subject-Based Banding framework, G3 describes a subject level; it is not a fixed label for every subject a student takes.
For learning purposes, use three checks beside a word: “I recognise it”, “I can explain it” and “I can use it”. Recognising density on a page is different from explaining why equal volumes can have different masses. Using it means choosing suitable measurements, keeping units consistent and interpreting the result. Move to the third check through small tasks, rather than colouring every familiar word as mastered.
CHAPTER 2 OF 16 · Vocabulary in use
2. Words 1–10: Read what the question asks you to do
Back to contentsThe following examples illustrate ways to respond. They are teaching prompts, not universal answer templates. A question may combine an instruction with a diagram, a previous result or an unfamiliar setting.
1. Define
Give the precise meaning of a term, sometimes through a defining relationship with its symbols identified. For density, write “mass per unit volume”. Adding that a particular object sinks gives an application, but does not replace the definition itself.
2. State
Supply the requested fact or result concisely. If asked to state the unit of force, write “newton, N”. Check the requested quantity first: a correct fact about energy does not answer a question about force merely because both appear in the same situation.
3. Describe
Set out the relevant features, pattern or sequence in words. For a cooling graph, describe how temperature changes with time. “It decreases rapidly at first, then more slowly” describes a pattern; “energy escapes” begins a causal explanation that may need further detail.
4. Explain
Make the meaning or physical reasoning clear in the stated context. A seat belt exerts a force that changes the passenger’s motion during braking. Naming “inertia” alone leaves the relationship unstated. Select the relevant principle and connect it to what happens.
5. Deduce
Reach a conclusion by linking available information with relevant knowledge. A straight displacement–time graph has a constant gradient, so the velocity is constant. Keep the evidence visible; a remembered sentence about acceleration may be inappropriate for the graph actually provided.
6. Suggest
Offer a plausible, physically supported response to the situation. A longer timing interval may reduce the relative effect of reaction-time uncertainty. An improvement must address a particular limitation; “use better apparatus” says too little to show what would improve.
7. Calculate
Use numerical information and suitable relationships to obtain a result. For 24 coulombs passing in 6.0 seconds, current is 24 ÷ 6.0 = 4.0 amperes. Show the relationship and substitution so that your reasoning remains visible even if arithmetic needs correction.
8. Measure
Obtain a quantity from an appropriate instrument. A ruler can measure a block’s length. Read the scale carefully and record its unit; writing a calculated density as though it came straight from a ruler confuses the measurement with the later processing.
9. Determine
Find the required quantity using the information or method available. To determine density, measure mass and volume, then divide. Sometimes a graph supplies the needed result. Decide what the task permits instead of assuming this word always names one particular calculation.
10. Estimate
Produce a reasoned approximate value using suitable assumptions. If a walk is about 150 metres and takes about 100 seconds, its average speed is about 1.5 m/s. State important assumptions; a guessed number without a physical basis is difficult to assess.
Numbers become useful when their quantities, units and limitations are clear. A sensible measurement sentence lets another person understand what was measured and how finely it was recorded.
11. Scalar
A quantity described by magnitude without a direction. A journey lasting 40 seconds has a scalar duration. Speed is also scalar. Do not add a compass direction to a scalar definition simply because the object involved happens to be moving somewhere.
12. Vector
A quantity requiring magnitude and direction. “A force of 8 N east” supplies both. Two forces of equal size can produce different results when their directions differ, so a vector answer should preserve the direction or the stated sign convention.
13. Magnitude
The size of a quantity. A velocity of −6 m/s has magnitude 6 m/s, with the minus sign indicating direction relative to the chosen positive direction. A negative component does not mean an object has a negative amount of speed.
14. Unit
The agreed reference used to express a measurement. Metres describe length; seconds describe time. An answer of “12” is incomplete when a distance is requested. Units also help detect errors: dividing distance by time should produce a speed unit.
15. Prefix
A symbol or word part showing a power-of-ten multiplier attached to a unit. Milli means one thousandth, so 250 mA equals 0.250 A. Convert deliberately before substitution, especially when a formula expects metres, kilograms or amperes rather than smaller units.
16. Resolution
The smallest change an instrument can distinguish or display. A digital balance reading to 0.01 g has finer displayed resolution than one reading to 1 g. Extra decimal places alone do not prove accuracy; calibration and the measurement method still matter.
17. Accuracy
How close a measurement is to the true or accepted reference value. A miscalibrated balance can repeatedly give readings that are all too high. Those readings may agree closely with one another while remaining inaccurate, which is why repetition cannot solve every problem.
18. Precision
How closely repeated measurements agree under the same conditions. Readings of 2.31, 2.32 and 2.31 seconds show little spread. Precision in this sense differs from accuracy and from display resolution; the measuring method may still contain a consistent bias.
19. Distance
The total length of the path travelled. Walking 5 metres east and then 5 metres west covers 10 metres. Distance accumulates along the route, so returning to the starting point does not cancel the distance already travelled during the first part.
20. Displacement
The directed change in position from start to finish. After walking 5 metres east and 5 metres west, displacement is zero. Draw the starting and finishing positions before calculating; the path between them matters for distance but does not set displacement.
Ask two separate questions: how is the motion changing, and what forces act on this object? Keeping these questions distinct prevents an everyday description such as “it is moving fast” from becoming a false explanation.
21. Speed
The rate at which distance is covered. A cyclist travelling 180 metres in 30 seconds has an average speed of 6.0 m/s. Average speed uses the whole distance and whole time; it does not describe every instant of the ride.
22. Velocity
The rate of change of displacement, including direction. A train moving steadily at 12 m/s north has a stated velocity. Turning changes velocity even if speed stays constant, so “constant speed” alone is insufficient evidence for zero acceleration.
23. Acceleration
The rate of change of velocity. An increase from 2.0 to 10 m/s in the same direction over 4.0 seconds gives 2.0 m/s². Check signs and direction: acceleration can occur during slowing or turning, as well as during speeding up.
24. Resultant force
The vector sum of all forces acting on one object. A 9 N pull right and a 4 N pull left give 5 N right. Add forces on the same object; an action–reaction pair acts on different objects and is not combined this way.
25. Inertia
An object’s resistance to a change in its velocity, associated with its mass. When a bus brakes, a passenger tends to continue moving forwards until a force changes that motion. Inertia is a property, not an extra forward force pushing the passenger.
26. Mass
A measure of the amount of matter in an object and of its inertia, expressed in kilograms. A 2 kg instrument remains 2 kg when moved to a different gravitational field. Its weight can change even though the instrument itself has not gained matter.
27. Weight
The gravitational force acting on an object. Where gravitational field strength is 10 N/kg, a 2 kg object weighs 20 N. Weight is a force measured in newtons; an answer in kilograms reports mass instead of the requested force.
28. Gravitational field strength
The gravitational force per unit mass at a location. If a 3 kg object experiences 24 N, the field strength is 8 N/kg. Use the value supplied in a question; do not replace a stated unfamiliar field with a memorised Earth value.
29. Friction
A contact force opposing relative sliding or its tendency between surfaces. Friction can help a shoe push against the ground during walking. Its direction is not always opposite the object’s overall motion; identify the contact and the possible sliding first.
30. Terminal velocity
The constant velocity reached by a falling object when its weight is balanced by upward drag and upthrust. If upthrust is negligible, drag equals weight. Resultant force and acceleration are zero, although the object keeps moving and the forces still act.
CHAPTER 5 OF 16 · Vocabulary in use
5. Words 31–40: Explain turning, balance and pressure
Back to contentsThese terms often require a labelled sketch before arithmetic. Mark the pivot, identify the object and distinguish a perpendicular distance from a length that merely looks convenient in the diagram.
31. Moment
The turning effect of a force about a point, equal to force multiplied by perpendicular distance to its line of action. A perpendicular 6 N push 0.40 m from a pivot produces 2.4 N m. A sloping length may be the wrong distance.
32. Pivot
The point or axis about which an object turns. A door turns about its hinge axis. When calculating a moment, specify the chosen pivot; the same force can have different moments about different points because the perpendicular distance changes.
33. Equilibrium
A condition of balance in which resultant force and resultant moment are zero for a rigid body. A balanced beam has equal clockwise and anticlockwise moments about a pivot. Checking moments alone does not establish that all translational forces also balance.
34. Centre of gravity
The point through which the resultant weight of an object can be considered to act. In a tipping diagram, draw weight vertically downwards through this point. Whether its line of action falls within the support base helps determine stability.
35. Stability
The tendency to remain upright or return after a small disturbance. A wider support base and lower centre of gravity generally make an object harder to topple. Explain the position of the weight’s line of action, rather than saying only “it is heavier”.
36. Pressure
Normal force per unit area. A 60 N normal force distributed over 0.020 m² produces 3000 Pa. Keep area conversion separate from length conversion: one square centimetre is 0.0001 square metres, not 0.01 square metres.
37. Density
Mass per unit volume. A sample of mass 54 g and volume 20 cm³ has density 2.7 g/cm³. A larger piece of the same uniform material can have more mass without having greater density; compare mass for equal volumes.
38. Fluid
A substance that can flow, including liquids and gases. Water in a pipe and air in a room are both fluids. In a pressure explanation, identify which fluid is involved and whether its density can be treated as constant in the situation.
39. Atmospheric pressure
The pressure exerted by the surrounding atmosphere. A surface exposed to air experiences this external pressure. When calculating pressure at a depth in an open liquid, distinguish the pressure due to the liquid column from the total pressure including the atmosphere.
40. Hydraulic system
A system that transmits pressure through a confined liquid. In an ideal hydraulic lift, equal transmitted pressure acting on a larger piston area gives a larger force. Increased output force does not create energy; the larger piston travels a smaller distance.
CHAPTER 6 OF 16 · Vocabulary in use
6. Words 41–50: Account for energy and temperature changes
Back to contentsEnergy questions become clearer when the system and transfer are named. Track where energy begins, where it goes and the time involved, instead of using “power” and “energy” interchangeably.
41. Work
Energy transferred when a force acts through a displacement. For a constant force along the motion, 15 N acting over 2.0 m transfers 30 J. Holding a stationary bag can feel tiring while doing no mechanical work on the bag.
42. Energy
A conserved quantity associated with stores and transfers in a system, measured in joules. A battery can transfer energy electrically to a lamp and surroundings. Saying energy is “used up” hides its destination; identify how it is transferred or dispersed.
43. Kinetic energy
Energy associated with motion, calculated as one half of mass multiplied by speed squared for the situations studied here. A 2.0 kg trolley at 3.0 m/s has 9.0 J. Doubling its speed quadruples this energy, with mass unchanged.
44. Gravitational potential energy
Energy associated with position in a gravitational field. Near Earth’s surface, lifting 1.5 kg through 2.0 m increases this store by 30 J when g = 10 N/kg. State the reference level and use vertical height, not the total path length.
45. Power
The rate of energy transfer or work done. Transferring 600 J in 20 seconds gives a power of 30 W. Two devices can transfer the same total energy at different powers if one completes the transfer in a shorter time.
46. Efficiency
The fraction of input energy transferred usefully, or useful output power divided by input power. If 80 J of 200 J is useful, efficiency is 40%. Define “useful” for the task; energy transferred elsewhere still exists.
47. Internal energy
The combined microscopic kinetic and potential energies of the particles in a system. Heating can increase internal energy without increasing temperature during a change of state. Do not treat internal energy and temperature as two names for the same quantity.
48. Temperature
A measure of how hot or cold something is, which helps determine the direction of net heating. A small cup and a large tank can have the same temperature without the same internal energy. Amount of matter still affects the energy involved.
49. Specific heat capacity
The energy needed per kilogram for each degree of temperature rise, without a change of state. If 1000 J raises 0.50 kg by 4.0°C, the value is 500 J/(kg °C). Check that the energy supplied is actually absorbed by the sample.
50. Specific latent heat
The energy transferred per kilogram during a change of state without a temperature change. If melting 0.20 kg requires 66 000 J, the value is 330 000 J/kg. No temperature-rise factor appears because the modelled change occurs at constant temperature.
CHAPTER 7 OF 16 · Vocabulary in use
7. Words 51–60: Explain thermal processes through particles
Back to contentsParticle explanations must connect microscopic behaviour to the observed result. A useful account identifies energy transfer, motion or separation, then states how that produces the change being discussed.
51. Conduction
Energy transfer through a material without bulk movement of that material. A metal spoon’s handle warms when its other end contacts hot food. Particle interactions and mobile electrons in metals contribute; the whole spoon does not have to flow towards the handle.
52. Convection
Energy transfer through the bulk movement of a fluid. Warmer, less dense water can rise while cooler water moves down, establishing circulation. State the density change and movement; “heat rises” is too broad because radiation and conduction need no upward flow.
53. Radiation
In thermal physics, radiation means energy transfer by electromagnetic waves. Thermal radiation can travel through a vacuum, so it does not require moving air. A warmer object exchanges radiation with its surroundings; net transfer depends on both sides, rather than emission stopping when an object is cool.
54. Thermal equilibrium
A condition in which objects in thermal contact have the same temperature and no net energy transfer by heating. A thermometer eventually reaches this condition with the object measured. Its reading before settling may therefore differ from the object’s temperature.
55. Evaporation
The escape of particles from a liquid’s surface into the gas phase, possible below the boiling point. Water on a pavement can evaporate without bubbling. The preferential escape of more energetic particles can cool the remaining liquid when energy is not replaced.
56. Boiling
A change from liquid to gas throughout the liquid at its boiling temperature for the given pressure. Bubbles form within the liquid. Boiling temperature depends on pressure, so avoid describing a remembered value as a universal property independent of conditions.
57. Melting
A change from solid to liquid. During melting of a pure substance at its melting point under constant pressure, supplied energy changes the particle arrangement rather than raising temperature. The particles do not themselves melt into smaller or larger particles.
58. Condensation
A change from gas to liquid that transfers energy to the surroundings. Water droplets outside a cold container can come from surrounding water vapour. They need not have leaked through the container; identify the source of the water before explaining the change.
59. Gas pressure
Pressure arising from gas particles colliding with a surface and exerting forces. At fixed volume, heating a fixed amount of gas generally increases pressure. Explain increased particle speeds and collisions; the particles do not individually expand into larger balls.
60. Expansion
An increase in a material’s dimensions or volume. In ordinary thermal expansion, average particle separation increases. A bridge may need allowance for temperature-related length changes. Distinguish a larger object from larger constituent particles, and check whether the material has unusual behaviour.
CHAPTER 8 OF 16 · Vocabulary in use
8. Words 61–70: Describe waves and light accurately
Back to contentsSeparate the motion of a disturbance from the motion of particles in a medium. For light, label the normal before discussing angles: many apparently difficult errors begin with measuring from the wrong line.
61. Oscillation
A repeated motion or variation about an equilibrium value. One complete back-and-forth motion of a pendulum is one oscillation. Count whole cycles consistently; timing a half-cycle but treating it as a full cycle changes the calculated period and frequency.
62. Amplitude
The maximum displacement from an equilibrium position in an oscillation. A wave with crests 3 cm above equilibrium has amplitude 3 cm. The full crest-to-trough distance is twice the amplitude for a symmetrical wave, not another measurement of the same amplitude.
63. Wavelength
The distance between neighbouring points in the same phase, such as successive crests. Measure along the direction of propagation. On a displacement–time graph, a horizontal interval gives time, so it cannot be read directly as a wavelength in metres.
64. Frequency
The number of complete oscillations per second, measured in hertz. A source completing 50 cycles in 2.0 seconds has frequency 25 Hz. Distinguish a total cycle count from a rate, and use the elapsed time for the same set of cycles.
65. Period
The time taken for one complete oscillation. At 25 Hz, the period is 1 ÷ 25 = 0.040 seconds. Frequency and period are reciprocals; if oscillations become more frequent, the time taken for each one becomes shorter.
66. Transverse wave
A wave whose oscillations are perpendicular to its direction of energy transfer. A point on an idealised string moves across that direction as the disturbance travels along the string. The string particles do not travel with the crest from source to destination.
67. Longitudinal wave
A wave whose oscillations are parallel to its direction of energy transfer. Sound in air involves moving compressions and rarefactions while air particles oscillate locally. Avoid describing the entire air column as being carried continuously from the loudspeaker to the listener.
68. Reflection
The return of a wave from a boundary into its original medium. For a light ray at a plane mirror, incidence and reflection angles are measured from the normal. A 30° angle to the mirror surface corresponds to 60° to the normal.
69. Refraction
A change in wave speed on entering another medium, generally accompanied by a direction change at oblique incidence. Light entering glass from air bends towards the normal. At normal incidence, speed changes without a change in direction, so bending is not universal.
70. Critical angle
The incidence angle in the optically denser medium for which the refracted ray travels along the boundary. Above it, total internal reflection can occur when light travels towards an optically less dense medium. Both the direction of travel and angle condition matter.
CHAPTER 9 OF 16 · Vocabulary in use
9. Words 71–80: Explain electrical quantities and circuit behaviour
Back to contentsKeep charge flow separate from energy transfer. Use school circuit diagrams and supervised practical work to study these ideas; understanding household safety components does not require opening or modifying an appliance.
71. Charge
An electrical property of matter, measured in coulombs, that may be positive or negative. In a circuit calculation, 3.0 A flowing for 4.0 seconds transfers 12 C past a point. Charge is conserved; a lamp does not consume it.
72. Current
The rate of flow of electric charge. Six coulombs passing a point in two seconds gives 3 A. In a steady series circuit the same current passes each component, although energy transfer and potential difference may differ between components.
73. Potential difference
Energy transferred per unit charge between two points. A 6 V potential difference corresponds to 6 J transferred per coulomb. Voltage does not “flow” around a circuit; charge flows, and potential difference describes an energy relationship between positions.
74. Electromotive force
Energy supplied by a source per unit charge passing through it. An ideal 9 V source supplies 9 J per coulomb. Despite the name, electromotive force is measured in volts rather than newtons; it is not a mechanical force.
75. Resistance
The ratio of potential difference across a component to the current through it. At 6.0 V and 0.30 A, resistance is 20 Ω. Do not assume that every component maintains the same resistance when its temperature or operating conditions change.
76. Series circuit
A circuit arrangement in which components lie along one current path. Two resistors of 4 Ω and 6 Ω in series have combined resistance 10 Ω. A break anywhere along that path prevents a steady current through the whole series arrangement.
77. Parallel circuit
An arrangement with branches connected across the same pair of points. Each branch has the same potential difference, while currents can differ. At a junction, total current divides between branches; equal branch currents require suitable component values, not just parallel wiring.
78. Electrical power
The rate of electrical energy transfer. A component at 12 V carrying 0.50 A transfers energy at 6.0 W. To find energy over a time interval, multiply power by time using compatible units; watts alone do not measure total consumption.
79. Fuse
A safety component designed to melt and break a circuit when excessive current flows. It protects against sustained overcurrent under its design conditions. In a diagram, identify which path is interrupted; a fuse is not simply a device that “reduces voltage”.
80. Earth wire
A protective conductor connecting exposed metal casing to earth in suitable appliances. Under a live-to-case fault, it provides a low-resistance path that helps protective disconnection occur. It should not normally carry the appliance’s operating current; its role concerns fault protection.
CHAPTER 10 OF 16 · Vocabulary in use
10. Words 81–90: Understand fields, induction and radioactivity
Back to contentsThese words name different processes even when the language sounds similar. Electromagnetic radiation, magnetic induction and radioactive decay should each be explained through the specific mechanism involved.
81. Magnetic field
A region in which a magnetic pole or suitable moving charge experiences a magnetic effect. A compass helps indicate field direction at a location. Field lines represent a model; they are not physical strings that occupy only the drawn paths.
82. Electromagnet
A magnet produced by electric current, commonly using a coil around a suitable iron core. Changing the current can change its magnetic effect. Distinguish a current-controlled magnet from a permanent magnet, and state what is held constant when comparing strengths.
83. Electromagnetic induction
The production of an electromotive force when the magnetic flux linking a conductor or coil changes. Moving a magnet relative to a coil can produce this change. A stationary magnet beside a stationary coil does not by itself provide continuing induction.
84. Transformer
A device using changing magnetic flux to transfer energy between coils and change alternating voltage. For an ideal transformer, doubling the secondary-to-primary turns ratio doubles the voltage ratio. A higher output voltage does not mean extra output power has been created.
85. Radioactivity
The spontaneous, random decay of unstable atomic nuclei, accompanied by emissions. The decay time of one nucleus cannot be predicted exactly. Random individual events can nevertheless give a regular statistical pattern for a large population of nuclei.
86. Alpha particle
A helium nucleus containing two protons and two neutrons, with positive charge. Alpha radiation has strong ionising ability and limited penetration. “Stopped by paper” does not mean harmless in every circumstance, because exposure inside the body presents a different situation.
87. Beta particle
In the beta-minus decay studied here, a fast electron emitted when a neutron in the nucleus changes into a proton. It does not come from an outer electron shell. Distinguish the nuclear change from ordinary processes that remove orbital electrons.
88. Gamma ray
High-energy electromagnetic radiation emitted in a nuclear transition. Gamma rays have no electric charge and no rest mass, and can be highly penetrating. Compare radiation using separate properties: penetration, charge and ionising ability are not interchangeable descriptions.
89. Half-life
The time for half the undecayed nuclei in a large sample to decay, or for its activity to halve. After two half-lives, one quarter remains on average. A measured count rate must be corrected for background when estimating this decay pattern.
90. Ionisation
The formation of charged atoms or molecules by gaining or losing electrons. Radiation can remove electrons from matter along its path. Ionisation changes electron number, not nuclear composition; it does not by itself make the material radioactive.
CHAPTER 11 OF 16 · Vocabulary in use
11. Words 91–100: Turn practical observations into justified conclusions
Back to contentsGood practical language makes a method reviewable. Identify the quantity, the change and the limitation specifically enough that someone else could understand what your results can support.
91. Independent variable
The quantity deliberately changed in an investigation. When studying how wire length affects resistance, wire length is independent. State a measurable quantity rather than naming the apparatus: “wire” is an object, while “length of the wire” is a variable.
92. Dependent variable
The quantity measured or determined to investigate its response to the independent variable. In a wire-length investigation, resistance is dependent. Explain how it is obtained, such as from measured potential difference and current, rather than claiming an unmentioned instrument measured it directly.
93. Controlled variable
A quantity kept suitably constant so that a comparison tests the intended relationship. Wire material and cross-sectional area matter when comparing resistance at different lengths. Explain how control is achieved; merely writing “keep everything else the same” is not a method.
94. Anomaly
A result that differs noticeably from the pattern of other results. Recheck a surprising reading and investigate possible causes. Do not delete it solely to make a graph look neat; honest records distinguish an original reading, a repeat and any justified exclusion.
95. Random error
An unpredictable variation that produces scatter in readings. Slightly different timing reactions can make some intervals too long and others too short. Repetition and averaging may reduce its influence, but cannot guarantee that a measurement contains no other source of error.
96. Systematic error
A consistent bias associated with the method or instrument. A miscalibrated balance may report every mass too high. Repeating the same biased method does not remove the bias; identify and correct the cause or use a suitable independent check.
97. Zero error
A non-zero instrument reading when the measured quantity should be zero. If a balance reads +0.2 g when empty, an appropriate correction is needed for subsequent readings. Keep the sign visible: adding the same offset again would increase the error.
98. Gradient
The change in the vertical-axis quantity divided by the change in the horizontal-axis quantity. A velocity–time graph rising 8 m/s in 4 seconds has gradient 2 m/s². Its physical meaning depends on the axes; gradient is not automatically speed.
99. Direct proportion
A relationship in which one quantity is a constant multiple of another. Its graph is a straight line through the origin. A straight line with a non-zero intercept shows a linear relationship, but does not demonstrate direct proportion between those plotted quantities.
100. Conclusion
A statement answering the investigation’s question using the evidence obtained. “Resistance increased with length over the tested range” reports a supported trend. Claiming exact direct proportion requires stronger evidence, and a limited dataset should not be presented as proving every possible case.
CHAPTER 12 OF 16 · Practise and continue
12. Use the words in complete Physics answers
Back to contentsA word becomes useful when it changes an answer. The following examples are original teaching situations. They are intended to make reasoning visible, rather than to predict an examination question or reproduce a marking scheme.
Worked example: from “the forces stop” to a force explanation
A falling object reaches a constant downward velocity. Assume upthrust is negligible. An incomplete answer says, “It has stopped accelerating because the forces stop.” The second part is wrong: weight and air resistance still act. A stronger answer is: “Upward air resistance balances the downward weight, so the resultant force is zero. The object therefore continues at constant velocity.” The words balances, resultant and velocity each do a different job.
Now change one condition: the object is still speeding up downwards. The revised explanation must say that weight is greater than air resistance and the resultant force acts downwards. A learner who can make this change understands more than someone who can repeat the terminal-velocity sentence. Ask which statement changed, and which force remained present.
Worked example: determine density without losing the units
A rectangular sample has mass 0.240 kg and volume 80.0 cm³. Density is mass divided by volume. Converting the mass gives 240 g, so density is 240 ÷ 80.0 = 3.00 g/cm³. Alternatively, 80.0 cm³ is 0.0000800 m³, giving 3000 kg/m³. Both describe the same material. Mixing 0.240 kg with a volume number in cubic centimetres and then labelling the result kg/m³ would be inconsistent.
The language also controls the procedure. “Measure the density with a ruler” is incomplete. The ruler helps establish dimensions, from which volume can be calculated; a balance gives mass. Density is then determined from those quantities. Ask the learner to name what each instrument contributes before performing the arithmetic.
Worked example: describe a graph, then explain the model
Suppose a velocity–time graph is horizontal at +4.0 m/s for 6.0 seconds. Its gradient is zero, so acceleration is zero. The area under the graph is 24 m, giving displacement over that interval. The positive velocity says that motion continues in the chosen positive direction. None of these conclusions says that the object is stationary.
A second graph is straight but slopes upwards. “The line goes up” describes its appearance, but “velocity increases at a constant rate” explains the plotted quantities. Always name both axes before interpreting a familiar shape. A horizontal displacement–time graph would support a different conclusion because displacement, rather than velocity, would be constant.
Worked example: keep charge and energy separate
A lamp has a potential difference of 6.0 V and carries 0.40 A for 10 seconds. Charge passing a point is current multiplied by time: 4.0 C. Energy transferred is potential difference multiplied by charge: 24 J. Power is 2.4 W. These three results answer different questions even though they describe one interval in one circuit.
Replace “the lamp uses up the current” with “the lamp transfers electrical energy to light and its surroundings while charge continues around the circuit”. Then ask what a second ammeter in the same steady series path would show. The explanation and calculation should agree; vocabulary learning is incomplete when the student gives the right definition but still predicts a smaller current after the lamp.
CHAPTER 13 OF 16 · Practise and continue
13. A short diagnostic with explained answers
Back to contentsTry these without looking back. Write a brief reason where useful, then compare with the answers. Use mistakes to choose a practice target; this is a teaching check, not a grade prediction or a substitute for a school assessment.
- A student walks 8 m east and 3 m west. Give distance and displacement.
- A trolley moves in a straight line at constant velocity. What is its resultant force?
- Two samples of the same uniform material have different masses. Must their densities differ?
- What distinction matters between “describe the cooling curve” and “explain the cooling”?
- A device transfers 90 J in 3.0 s. Find its power.
- A wave completes 20 oscillations in 5.0 s. Find frequency and period.
- Does a straight-line graph with a non-zero intercept establish direct proportion?
- A balance reads 0.4 g when empty. Does averaging ten identical readings remove that offset?
- A radioactive source has a corrected count rate of 160 counts per minute. What average rate is expected after two half-lives?
- A 5.0 V component carries 0.20 A. Find resistance, and name the relationship used.
Answers and what each answer tests
- 11 m; 5 m east. Distance adds the path lengths, whereas displacement compares the final and starting positions.
- Zero resultant force. Individual forces can still act and balance. Constant velocity means no acceleration in this model.
- No. Density compares mass with volume. A larger sample of the same uniform material contains proportionally more of both.
- Pattern versus cause. Description reports the temperature–time behaviour; explanation connects it to the relevant energy transfers and conditions.
- 30 W. Power is energy transferred divided by elapsed time, not the total 90 J transferred.
- 4.0 Hz and 0.25 s. Divide cycles by time for frequency, or time by cycles for period.
- No. A direct-proportion graph must pass through the origin. A non-zero intercept requires a different relationship.
- No. The consistent zero offset remains in every reading. Repetition alone does not correct this systematic effect.
- 40 counts per minute. Two successive halvings give one quarter of the initial corrected rate. Individual short counts can fluctuate.
- 25 Ω. Resistance is potential difference divided by current. Identify the quantities before inserting the numbers.
Sort each error into meaning, relationship, calculation or communication. A student who knows the density relationship but converts volume incorrectly needs different practice from a student who divides volume by mass. Correcting the category helps keep revision small and relevant.
CHAPTER 14 OF 16 · Practise and continue
14. How three learners can practise these words together
Back to contentsA useful three-pupil lesson can assign three temporary roles: explainer, solver and checker. The explainer states the meaning and conditions, the solver applies them to a new situation, and the checker looks for missing units, directions or assumptions. Rotate the roles so that the most confident student does not do all the speaking. This is an illustrative teaching model, not a statement about a particular class’s current availability.
For a first round, use distance, displacement and velocity. One learner sketches a route, another calculates two quantities, and the third explains why the answers differ. In the next round, change the route so that it ends at the starting point. Each learner then writes an individual answer. Hearing a correct group explanation is useful, but the individual response reveals whether everyone can reproduce the reasoning independently.
A tutor can keep the task within a clear boundary before adding difficulty. Start with whole-number distances on one straight line. Add a change of direction. Later introduce elapsed time or a graph. This staged practice follows eduKate’s approach of making a meaning usable before expecting transfer to a more complex problem. It does not require all three students to move at identical speed.
When a misconception appears, pause on the specific sentence. If someone says “a larger resistance uses more current”, compare two otherwise identical circuit diagrams and calculate the predicted currents. Then rewrite the sentence. The correction now has evidence behind it, so the student is less dependent on memorising a teacher’s preferred phrase.
End with a short individual transfer task using different numbers or an unfamiliar diagram. Keep a record of what each learner can explain without prompts. A lively discussion is encouraging, but the useful outcome is a clearer independent answer and a precise next step.
CHAPTER 15 OF 16 · Practise and continue
15. A manageable revision routine for students and parents
Back to contentsChoose five to eight terms connected to one current topic. For each, write a plain-language meaning, a relationship or labelled sketch, and one mistake to avoid. Cover the notes and explain the term aloud. Then solve a short question where the word matters. This combination makes the vocabulary work part of Physics revision rather than another separate list to memorise.
Revisit the same words after a gap with changed examples. A useful pattern is a first practice session, another check later in the week, then a mixed check the following week. Adjust the gap and workload to the student’s school schedule. A suggested routine is a planning tool; it does not promise that a particular number of repetitions guarantees retention.
Before a school assessment, inspect recent corrections and choose the terms that repeatedly affect answers. If units cause trouble, connect prefix, unit, pressure and density. If explanations remain vague, practise resultant force, acceleration and equilibrium through diagrams. If practical conclusions overreach, work with controlled variable, anomaly and direct proportion. The best next words are often those that explain the errors already on the page.
Parents can ask, “What does this word allow you to decide?” For parallel, the student might identify equal potential differences across branches. For half-life, the student might calculate the remaining fraction after several equal intervals. Ask for a second example when the first is memorised. You do not need to recreate a full tuition lesson at home.
Keep feedback specific and calm. “Your direction is missing” is more actionable than “you are careless”. “The unit conversion changed the volume” points to a repairable step. Let the student make the correction and explain it back. When a difficulty persists, show the actual attempt to the school teacher or tutor so that the explanation can begin from evidence.
For broader planning, use the Secondary 4 Science syllabus guide to distinguish examination routes. The eduKate Vocabulary Learning System extends the meaning–use–transfer approach across subjects. Continue from the word that blocks the current task, then return to the full question to see whether the repair holds.
CHAPTER 16 OF 16 · Practise and continue
16. Official references and how to use this guide
Back to contentsCurriculum references were checked on 16 November 2026. Read the examination-year documents alongside the school’s instructions. The definitions, numerical examples, diagnostic and lesson suggestions above are original educational explanations; none is presented as an official examination question or marking scheme.
- SEAB: 2027 SEC G3 Physics syllabus K323 — subject boundaries, assessment and command-word guidance.
- SEAB: 2027 G3 syllabuses for school candidates — confirm the registered subject and code.
- SEAB: Secondary Education Certificate overview — examination transition and subject levels.
- MOE: secondary school experience under Full Subject-Based Banding — the distinction between entry Posting Groups and subjects taken at different levels.
