Secondary 4 G3 Mathematics vocabulary helps students understand a question, choose a suitable method and explain an answer clearly. This guide teaches 100 useful words and mathematical terms through plain meanings, worked examples and common mistakes. It supports revision across the secondary course, including foundations first encountered before Secondary 4, and offers practical ways to use the words in three-pupil small-group learning.
For students preparing for the 2027 Singapore–Cambridge Secondary Education Certificate, the relevant Mathematics syllabus is G3 Mathematics K310. The list below is eduKate’s teaching selection, not a prescribed SEAB word list or a prediction of examination questions. Read each word alongside the mathematics it describes: recognising “factorise” is useful only when the student can produce factors and check them. Families preparing for another examination year should follow the syllabus and arrangements confirmed by the school.
- Who this helps: Secondary 4 students revising G3 Mathematics and parents trying to understand recurring mistakes.
- What is included: exactly 100 words and key terms, with meanings, examples and checks across instructions, algebra, geometry, measurement, statistics and probability.
- How to begin: attempt the short diagnostic, choose five uncertain terms, then apply them to actual questions.
- What to practise: translating words into symbols, explaining a method, retaining units and checking the answer in context.
- Small-group use: one student explains, another checks and a third changes the example; rotate roles so everyone works independently.
- What this guide does: supports vocabulary and reasoning; the student still needs the full school programme, topic practice and revision.
eduKateSingapore · Secondary 4 G3 Mathematics
Find your next learning step
Choose one route, or open the chapter index to return to a particular group of words.
Full chapter index · Try the diagnostic · Vocabulary learning system
Chapter index
Understand the task
The 100 words
- Words 1–10: instructions that tell you what to produce
- Words 11–20: number structure and accuracy
- Words 21–30: proportions, change and real situations
- Words 31–40: the grammar of algebra
- Words 41–50: functions, graphs and solutions
- Words 51–60: geometry, matching and direction
- Words 61–70: triangles and circles
- Words 71–80: measurement and vectors
- Words 81–90: sets, matrices and chance
- Words 91–100: describing data and combined events
Practice and next steps
A student sees 3(x + 4) and begins solving for x. Another sees “estimate” and spends several minutes entering every decimal into a calculator. Both may know plenty of mathematics. The first difficulty is deciding what the question is asking the mathematics to do.
Vocabulary belongs inside the solution. Ask the student to finish three sentences: “I need to find…”, “The information tells me…” and “My answer must be…”. The last sentence might end with “a length in centimetres”, “an inequality”, “a percentage” or “a reason”. This small reading check helps expose a misunderstanding before a page of working develops around it.
The 2027 K310 syllabus covers Number and Algebra, Geometry and Measurement, and Statistics and Probability. It also assesses interpretation, reasoning and mathematical communication. These original examples make the language usable. They are not an exhaustive syllabus checklist, and this is Mathematics rather than the separate Additional Mathematics subject.
Use the groups as a reference, not a hundred-item spelling test. Some students need to repair foundational words such as “coefficient”. Others know the definitions but confuse “similar” with “congruent” when a diagram changes. The useful question is whether the word survives a new example.
CHAPTER 2 OF 16 · Vocabulary in use
2. Words 1–10: instructions that tell you what to produce
Back to contentsRead the whole instruction, including any requested form or accuracy. These practical descriptions are reading aids: the surrounding question determines the exact response.
1. State
Give the requested fact or value directly. If asked to state the coefficient of x in 7x − 2, write 7. A short answer still needs to answer the precise question; include a unit or condition when the quantity requires it.
2. Calculate
Find a numerical answer using appropriate mathematics. To calculate the cost of six notebooks at $2.40 each, write 6 × 2.40 = $14.40. Record enough working to show the method, and check whether the answer’s size makes sense.
3. Evaluate
Find the value of an expression. Evaluating 2a² − 1 when a = −3 gives 2(−3)² − 1 = 17. Brackets protect the substitution: squaring −3 produces 9, whereas an unbracketed negative sign can lead to a different calculation.
4. Simplify
Rewrite an expression in an equivalent, more manageable form. For example, 4x + 3 − x becomes 3x + 3. No value of x has been found. Check that the new expression gives the same result as the original for a chosen input.
5. Expand
Multiply through brackets to write the expression as a sum of terms. Thus 3(x − 4) = 3x − 12. Every term inside the bracket receives the multiplier; multiplying only the first term changes the expression.
6. Factorise
Rewrite an expression as a product. For example, x² + 5x + 6 = (x + 2)(x + 3). Expand the answer to check it. Factorising alone does not justify setting either bracket equal to zero; an equation is needed.
7. Solve
Find the value or values that satisfy an equation or inequality. Solving 3x + 2 = 14 gives x = 4. Substitute the answer into the original statement. For an inequality, the solution may be a range rather than one number.
8. Show that
Present a valid route from the given information to the stated result. To show that 2(x + 3) − x equals x + 6, expand and collect terms. Merely copying the target result does not demonstrate why it follows.
9. Explain
Give the mathematical reason, linked to the situation. “The triangles are similar because their corresponding angles are equal” identifies a relevant condition. “They look the same” does not. A useful explanation names the property and shows where it applies.
10. Hence
Use the preceding result to move forward. After finding that 2x + 3 = 11, hence find 4x + 6 by doubling: the answer is 22. With “hence”, build on the earlier result; “hence, or otherwise” explicitly allows another method.
These terms often appear inside larger problems. A small misunderstanding can alter a correct method before the student reaches the final answer.
11. Integer
A whole number that may be negative, zero or positive. Examples include −5, 0 and 12; 2.5 is not an integer. When a question asks for integer solutions, first find the permitted range, then select only whole-number values within it.
12. Rational number
A number expressible as a fraction of two integers with a non-zero denominator. Both 0.75 = 3/4 and −2 = −2/1 are rational. A decimal need not terminate to be rational: a recurring decimal can also represent a fraction.
13. Prime factor
A factor that is itself a prime number. The prime factorisation of 60 is 2² × 3 × 5. Keep dividing until every factor is prime; stopping at 4 × 15 has found a factorisation, but not a prime factorisation.
14. Highest common factor
The greatest positive integer that divides each given integer exactly. The highest common factor of 12 and 18 is 6. Think of the largest equal group size that can fit both quantities without a remainder, rather than a common total.
15. Lowest common multiple
The smallest positive number that is a multiple of every given positive integer. The lowest common multiple of 12 and 18 is 36. It helps identify when repeating cycles coincide; it is not the largest number dividing both originals.
16. Reciprocal
A number that multiplies with the original number to give 1. The reciprocal of 3/5 is 5/3, and the reciprocal of −4 is −1/4. Zero has no reciprocal because multiplying zero by any number cannot produce 1.
17. Index
The power attached to a base. In 2³, the index 3 means 2 × 2 × 2. A negative index indicates a reciprocal: 2⁻³ = 1/8. It does not mean the final value is automatically negative.
18. Standard form
A way to write a positive number as A × 10ⁿ, where 1 ≤ A < 10 and n is an integer. Thus 46,000 = 4.6 × 10⁴. Check both the power and the size of A; 46 × 10³ is not standard form.
19. Significant figures
Digits counted from the first non-zero digit to describe numerical precision. To three significant figures, 0.004763 becomes 0.00476. Initial zeros locate the decimal value; they do not start the count. Keep extra calculator digits during working and round at the end.
20. Decimal places
The number of digits retained after the decimal point. To two decimal places, 7.286 becomes 7.29. This is different from two significant figures, which gives 7.3. Circle the requested accuracy before rounding; familiar numbers can still have unfamiliar instructions.
CHAPTER 4 OF 16 · Vocabulary in use
4. Words 21–30: proportions, change and real situations
Back to contentsFor each relationship, identify the quantities before selecting an operation. The same numbers can describe very different situations.
21. Ratio
A comparison of quantities in a stated order. If red counters and blue counters are in the ratio 2:3, there are two red parts for every three blue parts. The red fraction of the total is 2/5, not 2/3.
22. Direct proportion
A relationship in which one quantity is a constant multiple of another: y = kx. If y = 3x, doubling x doubles y. A straight-line graph through the origin represents this relationship; a non-zero starting charge changes the model.
23. Inverse proportion
A relationship with a constant product: y = k/x for non-zero x. If xy = 24, changing x from 3 to 6 changes y from 8 to 4. “One increases while the other decreases” alone does not establish inverse proportion.
24. Percentage change
The change expressed as a percentage of the original value. An increase from 40 to 50 is 10/40 × 100% = 25%. Use the original as the comparison base. Dividing by the final value answers a different question.
25. Reverse percentage
Finding the original value from a changed value and the percentage change. After a 20% discount, a price of $64 represents 80% of the original, so the original was 64 ÷ 0.8 = $80. Adding 20% to $64 will not undo that discount.
26. Rate
A comparison expressed per unit of another quantity. Printing 24 pages in six minutes gives an average rate of four pages per minute. Keep the units with the number: the reciprocal rate is one-quarter of a minute per page, whereas four minutes per page describes a much slower rate.
27. Average speed
Total distance divided by total time for the stated journey. Travelling 60 km in 1.5 hours gives 40 km/h. Do not simply average two listed speeds unless the journey conditions justify it; unequal times or distances require careful totals.
28. Compound interest
Interest calculated on an amount that includes previously added interest. A hypothetical $1,000 growing at 2% annually becomes 1000 × 1.02² = $1,040.40 after two years. The accumulated amount and the interest earned are different quantities.
29. Scale
A relationship between a representation and the corresponding actual size. At a map scale of 1:25,000, 4 cm represents 100,000 cm, or 1 km. Convert units before comparing lengths, and remember that area changes with the square of the length scale.
30. Unit conversion
Expressing the same quantity in different units. Since 1 m = 100 cm, 1 m² = 10,000 cm². Squared and cubed units require squared and cubed conversion factors. Write one known relationship before moving a decimal point.
Read an algebraic line as a statement with parts and relationships. Its symbols are meaningful, not decorations to move around by habit.
31. Variable
A symbol representing a quantity that may take different values. In C = 2n, n could represent the number of identical items and C their cost. State what the variable represents before using it, including any restriction such as whole-number values.
32. Constant
A value that stays fixed within the relationship being considered. In y = 3x + 5, 3 and 5 are constants while x and y vary. A constant need not be universally fixed; it is fixed for the particular model.
33. Coefficient
The numerical factor multiplying a variable term. In −7x + 2, the coefficient of x is −7, including the sign. In x² + 4x, the coefficient of x² is 1 even though that 1 is not explicitly written.
34. Term
A part of an expression separated from other parts by addition or subtraction. The expression 3x² − 2x + 5 has three terms: 3x², −2x and 5. Keep the sign attached when collecting terms, and combine only like terms.
35. Expression
A mathematical combination of numbers, variables and operations without asserting an equality. For example, 2x + 7 is an expression. You may simplify or evaluate it; you cannot find a unique x merely because the expression contains a letter.
36. Equation
A statement that two expressions have equal values. The equation 2x + 7 = 15 is true when x = 4. Apply the same valid operation to both sides, and verify that your final value satisfies the original equality.
37. Identity
An equality true for every permitted value of its variable or variables. For example, 2(x + 3) = 2x + 6 holds for all real x. Testing one value may check a suspected error, but it cannot establish an identity for every value.
38. Inequality
A comparison using symbols such as <, >, ≤ or ≥. Solving −2x > 6 gives x < −3 because dividing by a negative reverses the comparison. Test a value such as −4 to check the direction.
39. Subject of a formula
The variable isolated on one side of a formula. Making h the subject of A = bh/2 gives h = 2A/b, where b is non-zero. Rearrangement changes the presentation of the relationship; it does not assign numerical values.
40. Quadratic
An expression, equation or function whose highest power of the variable is two. For example, x² − 5x + 6 is quadratic. Identify the complete structure before choosing a method; the presence of an x² term somewhere is not enough after simplification.
A graph connects algebra to a picture. Read its axes, scale and quantities before interpreting its shape.
41. Function
A rule assigning exactly one output to each permitted input. The rule y = x² gives output 9 when x = 3. Different inputs may share an output: x = −3 also gives 9. That does not stop the rule being a function.
42. Coordinate
A number identifying position relative to an axis; an ordered pair locates a point in the plane. The point (3, −2) is three units right and two units down from the origin. Reversing the order usually identifies a different point.
43. Gradient
A measure of a graph’s slope. A line through (1, 2) and (5, 10) has gradient (10 − 2)/(5 − 1) = 2. Use consistent subtraction order. In an applied graph, the axis units determine what that gradient represents.
44. Intercept
The point or coordinate where a graph meets an axis. For y = 2x − 6, the y-intercept is −6 and the x-intercept is 3. To find an x-intercept, set y to zero; the other coordinate must still be found.
45. Turning point
A point where a graph changes from decreasing to increasing, or the reverse. The graph y = (x − 2)² + 3 has a minimum turning point at (2, 3). Read both coordinates; the minimum value of y alone is 3.
46. Axis of symmetry
A line dividing a figure into matching reflected halves. For y = (x − 2)² + 3, that line is x = 2. Give an equation for a line. Writing only “2” does not fully identify the axis.
47. Simultaneous equations
Equations that must be satisfied by the same values at the same time. For x + y = 7 and x − y = 1, adding gives 2x = 8, so x = 4 and y = 3. Check both original equations.
48. Root
A value of the variable making an equation, written with zero on one side, true. The roots of x² − 5x + 6 = 0 are 2 and 3. On the corresponding graph, these are the x-values where y = 0.
49. Tangent
A straight line following a curve’s direction at a specified point. Drawing a suitable tangent helps estimate the gradient there. For a circle, the tangent is perpendicular to the radius at contact. Do not define every curve’s tangent as a line that can never meet it again.
50. Exponential growth
Growth by a constant multiplicative factor over equal steps. In y = 3 × 2ˣ, each increase of one in x doubles y. Compare this with adding the same amount repeatedly: a constant difference describes a different pattern.
Name a geometric property only when its conditions are present. The appearance of a sketch is not a substitute for given information.
51. Parallel
Lines in the same plane that never meet. Parallel lines cut by a transversal create useful angle relationships. Check for a stated condition, arrows or a justified result; two lines that look parallel in a diagram may not be given as parallel.
52. Perpendicular
Meeting at a right angle of 90°. A rectangle’s adjacent sides are perpendicular. This does not mean they are equal in length. When applying a right-triangle method, locate the actual right angle rather than choosing whichever corner looks square.
53. Corresponding angles
Angles occupying matching positions where a transversal meets two lines. When those lines are parallel, corresponding angles are equal. Identify the transversal and both line intersections before pairing the angles; matching positions matter more than the diagram’s orientation.
54. Alternate angles
Angles on opposite sides of a transversal in the relevant alternating positions. Alternate interior angles are equal when the two crossed lines are parallel. Rotating the diagram does not change the relationship; explain it using the lines rather than a memorised letter shape.
55. Bisector
A line or ray dividing an angle into two equal angles, or a line dividing a segment into two equal parts. An angle bisector of 70° creates two 35° angles. A segment bisector is not automatically perpendicular; that additional condition must be stated.
56. Congruent
Having the same shape and size, with corresponding lengths and angles matching. Congruent triangles may face different directions. Match corresponding vertices carefully before transferring a length; an unrotated visual comparison can pair the wrong sides.
57. Similar
Having the same shape, with corresponding angles equal and corresponding lengths in one constant ratio. Triangles with sides 3, 4, 5 and 6, 8, 10 are similar. Their corresponding lengths need not be equal, so similarity does not imply congruence.
58. Scale factor
The multiplier connecting corresponding lengths in an enlargement or reduction. A scale factor of 3 changes a 4 cm side to 12 cm. For similar figures, areas multiply by 9; for similar solids, volumes multiply by 27.
59. Bearing
A direction measured clockwise from north, conventionally recorded with three digits. Due east has bearing 090°. Start at the observation point’s north line. Reversing a journey changes the bearing, so “from A to B” is essential information.
60. Angle of elevation
The upward angle from an observer’s horizontal line of sight to an object. It is measured from the horizontal, not from the vertical wall. In a height problem, distinguish the vertical rise above the observer from the object’s total height above ground.
Draw or annotate the relevant triangle. Labels such as opposite and adjacent depend on the selected angle.
61. Trigonometric ratio
A relationship connecting an angle to side lengths in a right-angled triangle. Choosing a ratio depends on the known and required sides. Before entering numbers, label the reference angle, opposite side, adjacent side and hypotenuse on the same triangle.
62. Hypotenuse
The side opposite the right angle in a right-angled triangle. It is the triangle’s longest side. In a 3–4–5 right triangle, the hypotenuse is 5. Find the right angle first; the page’s horizontal or vertical direction is irrelevant.
63. Sine
For an acute angle in a right triangle, sine equals opposite divided by hypotenuse. If these sides are 3 and 5, sin θ = 3/5. Finding θ requires the inverse sine operation; multiplying by “sin” as though it were a number is incorrect.
64. Cosine
For an acute angle in a right triangle, cosine equals adjacent divided by hypotenuse. If the adjacent side is 4 and the hypotenuse is 5, cos θ = 4/5. The adjacent side used here excludes the hypotenuse even though both touch the angle.
65. Tangent ratio
For an acute angle in a right triangle, tan θ equals opposite divided by adjacent. If these lengths are 3 and 4, tan θ = 3/4. This trigonometric use differs from a tangent line to a curve; context tells you which meaning applies.
66. Sine rule
A relationship between sides and their opposite angles in a triangle: a/sin A = b/sin B = c/sin C. Pair each side with the angle facing it. The rule also works beyond right triangles; an unlabelled diagram can conceal a mismatched pair.
67. Cosine rule
A triangle relationship such as a² = b² + c² − 2bc cos A. With sides 3 and 4 enclosing 60°, the opposite side is √13. The angle must be the included angle between the two sides used in that substitution.
68. Radian
An angle unit defined using arc length and radius. A straight angle is π radians, equal to 180°. Before using a formula or calculator, identify the angle unit; entering a degree value into a formula requiring radians changes the result.
69. Arc
A portion of a circle’s circumference between two points. For radius r and central angle θ in radians, its length is rθ. Thus r = 5 cm and θ = 2 give a 10 cm arc, not a straight chord of that length.
70. Sector
A region bounded by two radii and their connecting arc. A quarter-circle sector of radius 6 cm has area 9π cm². Its perimeter also includes the two radii; the curved boundary alone does not enclose the whole sector.
Before choosing a formula, decide whether the answer describes a boundary, a covering, a capacity or a movement.
71. Chord
A straight segment joining two points on a circle. A diameter is a chord through the centre, but other chords need not pass through it. Distinguish the straight chord from the curved arc connecting the same endpoints.
72. Cyclic quadrilateral
A quadrilateral whose four vertices lie on one circle. Its opposite angles sum to 180°: if one is 110°, the opposite angle is 70°. Confirm that all four vertices lie on the circle before applying this property.
73. Perimeter
The total length around a plane figure’s boundary. A 5 cm by 3 cm rectangle has perimeter 16 cm. For a composite figure, trace the outside edge; a shared internal edge does not belong to the outer perimeter.
74. Area
The size of a two-dimensional region, expressed in square units. A 5 cm by 3 cm rectangle has area 15 cm². A length answer and an area answer have different units; check them before deciding whether the calculation fits the question.
75. Surface area
The total area of the relevant surfaces of a solid. A closed cube with 3 cm edges has surface area 6 × 3² = 54 cm². For an open container, identify which faces actually exist before adding areas.
76. Volume
The amount of three-dimensional space occupied by a solid or available inside a container. A cube with 3 cm edges has volume 27 cm³. Doubling every length multiplies volume by eight, so linear scaling cannot be applied unchanged.
77. Prism
A solid with two congruent, parallel polygonal end faces and a uniform cross-section parallel to those faces. A prism with cross-sectional area 12 cm² and perpendicular length 5 cm has volume 60 cm³. The cross-section need not be rectangular; identify the unchanged shape before calculating its area.
78. Pyramid
A solid with a polygonal base and triangular faces meeting at an apex. Its volume is one-third of base area times perpendicular height. A base area of 12 cm² and height of 5 cm give 20 cm³; a sloping edge is not that height.
79. Vector
A quantity with magnitude and direction. Moving from (1, 2) to (4, 6) gives displacement components (3, 4). Reversing the movement gives (−3, −4). The two movements have equal lengths but opposite directions, so they are different vectors.
80. Magnitude
The size or length of a vector, without its direction. A vector with components (3, 4) has magnitude √(3² + 4²) = 5. The result is a non-negative number; it is not the vector itself.
Keep track of what each symbol refers to. A member of a set, the whole set and the number of its members are different objects.
81. Set
A clearly defined collection of distinct objects. If A = {2, 4, 6}, A has three elements. Repeating 2 inside the braces does not create an additional distinct member. State the rule clearly enough to decide whether an object belongs.
82. Element
An individual member of a set. If A = {2, 4, 6}, write 4 ∈ A. The number 4 and the set {4} are different: the first is an element, while the second is a one-element subset.
83. Union
The set containing everything in either set, including elements in both. If A = {1, 2} and B = {2, 3}, then A ∪ B = {1, 2, 3}. Count the overlapping element once when finding the union’s size.
84. Intersection
The set of elements shared by two sets. With A = {1, 2} and B = {2, 3}, A ∩ B = {2}. On a Venn diagram, shade the overlap. Reading “and” correctly matters when a question describes membership in both groups.
85. Complement
Everything in the stated universal set that is outside the specified set. If the universe is {1, 2, 3, 4} and A = {1, 3}, then A′ = {2, 4}. The universe sets the boundary; the complement does not mean every imaginable number.
86. Subset
A set whose every element also belongs to another set. Thus {2, 4} is a subset of {2, 4, 6}. Inclusion concerns all its members, not whether the braces appear inside the larger set. Distinguish subset notation from element notation.
87. Matrix
A rectangular arrangement of entries in rows and columns. A sales matrix might use rows for shops and columns for product types. Preserve those meanings when adding or multiplying matrices; carrying out an operation without checking dimensions can produce an invalid calculation.
88. Order
In a matrix question, its order is the number of rows followed by the number of columns. Two rows and three columns give order 2 × 3. This context differs from ordering numbers from smallest to largest; read the surrounding noun.
89. Scalar
A number used to multiply every entry of a vector or matrix. Multiplying vector (3, −2) by 2 gives (6, −4). A negative scalar reverses a non-zero vector’s direction as well as changing its size according to the scalar’s absolute value.
90. Probability
A measure of chance between 0 and 1. On one fair six-sided die, the probability of a number greater than 4 is 2/6 = 1/3. Counting favourable outcomes over total outcomes requires those individual outcomes to be equally likely.
CHAPTER 11 OF 16 · Vocabulary in use
11. Words 91–100: describing data and combined events
Back to contentsA numerical summary is useful only when its meaning is understood. Explain what the statistic says about the actual data.
91. Mean
The sum of the values divided by the number of values. The mean of 2, 3 and 7 is 4. A mean need not appear in the original data. When frequencies are supplied, account for how many times each value occurs.
92. Median
The central value after data are ordered. For 2, 4, 9 and 11, average the two middle values to obtain 6.5. Sorting is essential: the middle entry in an unsorted list is not necessarily its median.
93. Mode
The value occurring most frequently. In 2, 3, 3 and 8, the mode is 3. It describes frequency rather than size: the largest value is not automatically the mode. Some datasets have more than one most frequent value.
94. Range
The largest data value minus the smallest. For 2, 3, 3 and 8, the range is 6. It measures overall spread, not a typical value. One unusually large or small observation can change the range substantially.
95. Quartile
A boundary used to divide ordered data into four approximately equal portions. The lower and upper quartiles are Q₁ and Q₃. On a cumulative frequency graph, locate the appropriate fraction of the total frequency before reading the corresponding data value.
96. Interquartile range
The difference Q₃ − Q₁, describing the spread of the middle half of the data. If Q₁ = 12 and Q₃ = 20, the interquartile range is 8. A smaller value suggests a tighter middle group, not automatically a higher standard of performance.
97. Cumulative frequency
A running total of frequencies up to a stated boundary. If successive class frequencies are 4, 7 and 5, their cumulative frequencies are 4, 11 and 16. Check what each boundary includes; reading the wrong horizontal value changes the interpretation.
98. Standard deviation
A measure of how spread out data are around their mean. Identical values have standard deviation zero. When comparing datasets in the same units, discuss spread alongside the mean; a lower standard deviation suggests greater consistency, not necessarily a better average outcome.
99. Mutually exclusive
Describing events that cannot occur together in the same trial. On one die roll, obtaining 1 and obtaining 6 are mutually exclusive. For such events, add their probabilities to find the chance of either occurring. Check the overlap before using that shortcut.
100. Independent
Describing events where learning that one occurred does not change the probability of the other. Two independent fair coin tosses give probability 1/4 for two heads. Independence is a condition to establish from the situation, not a synonym for events having different names.
CHAPTER 12 OF 16 · Practise and continue
12. A short diagnostic: can you use the words?
Back to contentsTry these without rereading the entries. Say what each instruction requires before doing the calculation. These are original practice questions, not official examination items.
- Simplify 3x + 5 − x. Has the instruction asked you to find x?
- Factorise x² − 9. Then solve x² − 9 = 0. Explain why the answers have different forms.
- A jacket costs $72 after a 10% discount. Find its original price.
- Round 0.03746 to three significant figures and to three decimal places.
- Two similar shapes have corresponding lengths in the ratio 2:5. Find their area ratio.
- For y = 3x − 12, find the x-intercept and the gradient.
- Let A = {1, 2, 4} and B = {2, 3, 4}. Find their intersection and union.
- One fair die is rolled. Are “even” and “greater than 4” mutually exclusive? Explain.
Answers and what a mistake reveals
1. The simplified expression is 2x + 5. No value of x is requested. 2. The factorisation is (x − 3)(x + 3); solving the equation gives x = 3 or x = −3. The first answer is an equivalent product, while the second identifies values satisfying an equality.
3. The original price is 72 ÷ 0.9 = $80 because $72 represents 90% of it. 4. Three significant figures gives 0.0375; three decimal places gives 0.037. If these were confused, practise locating the counting start before doing more arithmetic.
5. The area ratio is 4:25. 6. Setting y = 0 gives x = 4, so the x-intercept is 4; the gradient is 3. 7. The intersection is {2, 4}, and the union is {1, 2, 3, 4}. 8. They are not mutually exclusive: 6 is both even and greater than 4.
Sort errors into reading, meaning, method and execution. A student who correctly explains reverse percentage but divides incorrectly needs a different next task from one who adds 10% to the discounted price. Correct the first unstable step instead of repeating the entire worksheet.
CHAPTER 13 OF 16 · Practise and continue
13. Worked examples: let the vocabulary organise the solution
Back to contentsExample A: an expression becomes an equation
Question: A rectangle has width x cm and length (x + 3) cm. Its area is 40 cm². Form an equation and find its dimensions.
“Area” connects the dimensions through multiplication: x(x + 3) = 40. “Expand” produces x² + 3x = 40. Rearranging gives x² + 3x − 40 = 0, and factorising gives (x + 8)(x − 5) = 0. Therefore x = −8 or x = 5.
Now interpret the roots. A rectangle’s width cannot be −8 cm, so the width is 5 cm and the length is 8 cm. The check is 5 × 8 = 40 cm². A strong response shows the algebra and explains why the negative solution does not fit this situation.
Example B: average does not always mean add and divide by two
Question: A cyclist travels 12 km in 30 minutes and then 8 km in 30 minutes. Find the average speed. Compare this with travelling 12 km at 24 km/h and another 12 km at 16 km/h.
For the first journey, the total distance is 20 km and total time is one hour, so the average speed is 20 km/h. The two half-hour sections happen to have speeds of 24 and 16 km/h; averaging those speeds also works because the times are equal.
For the second journey, the distances are equal but the times differ. The first section takes 12/24 = 0.5 hours and the second takes 12/16 = 0.75 hours. The average speed is 24 ÷ 1.25 = 19.2 km/h. The definition stays stable even when a convenient shortcut stops working.
Example C: turn a statistic into a statement
Question: Two sets of practice completion times have the same mean of 18 minutes. Group A has standard deviation 2 minutes; Group B has standard deviation 5 minutes. Compare their times using this information.
A suitable response is: “The groups have the same mean completion time, while Group A’s times are less spread out around the mean.” The data do not show that every student in Group A is faster or that its students understand more mathematics. The conclusion must stay within the evidence supplied.
CHAPTER 14 OF 16 · Practise and continue
14. How three-pupil small-group learning can use the list
Back to contentsThe following is an illustrative teaching model. Start with a question each student attempts alone. Then assign three temporary roles: explain the instruction, check the mathematics and change one condition. Rotate the roles so the most confident speaker does not become the only person thinking.
For a similarity question, the first student explains why corresponding lengths are compared. The second checks whether the requested quantity is length, area or volume. The third changes the scale factor or reverses which shape is larger. Each then answers a fresh question independently. The tutor can see whether the understanding transfers beyond the shared example.
Keep the correction specific: “You used the length factor for an area” is more useful than “You are careless.” Ask the student to write one corrected rule beside one worked example. Later, remove the labels and mix the topic with an unrelated problem; recognising when a rule applies is part of knowing it.
CHAPTER 15 OF 16 · Practise and continue
15. A practical revision routine for students and parents
Back to contentsChoose five terms from recent marked work, rather than beginning at word one every time. For each, write a meaning in your own language, make an example and explain one tempting mistake. Revisit the terms on another day with different numbers or a different diagram. If the task is still easy, explain the boundary where the rule would fail.
A parent can ask, “What changed between these two questions?” or “Which word tells you the form of the answer?” There is no need to provide the solution immediately. Give the student time to point to evidence in the question. If both of you are uncertain, take the attempted working to the teacher or tutor and ask about the exact line where the interpretation changed.
For wider planning, use the Secondary 4 Mathematics syllabus guide to connect vocabulary practice with the student’s current topics. The eduKate Vocabulary Learning System offers a broader route for developing meaning, recall and application across subjects.
Progress means the student can interpret a less familiar question, select a justified method and check the result without a prompt. Knowing all 100 definitions does not guarantee a grade. A useful next step is smaller and observable: choose one recurring misunderstanding, repair it, and demonstrate the repair on a fresh question.
Curriculum references checked on 16 November 2026: SEAB’s 2027 G3 syllabus index and the G3 Mathematics K310 syllabus PDF. The vocabulary selection, explanations, diagnostic and worked teaching examples are eduKate’s original learning material. Follow the school’s confirmed examination year and subject registration when choosing official documents.
