Three learners review open books together at a classroom table, with stacks of textbooks, stationery and a whiteboard in the bright room.

Secondary 1 G3 Vocabulary | Top 100 Words for Mathematics

Secondary 1 G3 Mathematics vocabulary gives students the language needed to read questions, choose operations and explain their working. This guide brings together 100 useful words and technical terms for number work, ratio, percentages, algebra, graphs, geometry, measurement and data. Each entry includes a meaning and an example. The aim is practical: when a question asks a student to estimate, evaluate or justify, the student should understand what action to take before reaching for a calculator.

Start with the section that matches your child’s current school topic. Learn a small set of terms, explain each one aloud, solve a related question and return to it later without looking at the answer. Parents can help by asking what a word means in that particular question, rather than asking for a memorised definition alone. This is eduKate’s teaching selection, not an official MOE or SEAB Top 100 list. The study routine and three-learner activities below can be adapted for home learning or small groups tuition.

  • Audience: Secondary 1 students taking Mathematics at G3 and parents supporting the transition from primary school.
  • Coverage: 100 numbered vocabulary entries, organised into ten groups of ten.
  • Each entry: a clear meaning, a mathematical use and a short example.
  • Study order: follow the school’s current topics; the numbering is an index, not a difficulty ranking.
  • Practice: translate words into symbols, explain decisions and check the answer against the question.
  • Support: worked examples, common confusions, a five-week routine and a diagnostic with explanations.
  • Progress: look for more accurate independent work and clearer explanations, not just completed flashcards.

Find the vocabulary help you need

Choose the topic being taught at school, or start with a worked explanation. Every teaching chapter stays open for reading.

Full chapter index · Try the learning check · Vocabulary Learning System

Chapter index

Understand the guide · Chapters 1–1
  1. Understand the Secondary 1 G3 Mathematics scope
Learn words 1–50 · Chapters 2–6
  1. Words 1–10: Number types and factors
  2. Words 11–20: Operations and numerical accuracy
  3. Words 21–30: Ratio and percentage
  4. Words 31–40: Rate, speed and units
  5. Words 41–50: Read and manipulate algebra
Learn words 51–100 · Chapters 7–11
  1. Words 51–60: Equations, formulae and patterns
  2. Words 61–70: Coordinates and linear graphs
  3. Words 71–80: Angles and line relationships
  4. Words 81–90: Shapes and measurement
  5. Words 91–100: Data and mathematical explanations
Use the words · Chapters 12–14
  1. Turn vocabulary into working: four examples
  2. Repair the confusions that change an answer
  3. Use the vocabulary in a three-learner session
Practise and check · Chapters 15–18
  1. An adjustable five-week vocabulary routine
  2. Check understanding with eight short tasks
  3. What parents can ask and what progress looks like
  4. Official sources and further learning

CHAPTER 1 OF 18 · Understand the guide

1. Understand the Secondary 1 G3 Mathematics scope

Back to contents

The MOE G2 and G3 Mathematics syllabuses identify the G3 Secondary One content separately. Its areas include number operations, ratios, percentages, rate and speed, linear expressions and equations, coordinate graphs, angles, polygons, measurement and basic data displays. Use the G3 section headed Secondary One, rather than assuming that every topic in the full secondary syllabus belongs in the first year.

This distinction matters when selecting a vocabulary list. Mean, median, mode, probability, Pythagoras’ theorem and quadratic equations are outside this list because the cited syllabus places that content later. A school may organise learning differently, so keep the teacher’s current scheme and instructions beside this guide. The list supports the stated foundation; it does not attempt to replace the syllabus or every word in a textbook.

G3 describes a subject level. It should not be used as a label for a child’s entire ability. MOE explains the subject-level approach in its Education Statistics Digest 2025. Its Full Subject-Based Banding infographic illustrates how Posting Groups guide admission while students can take subjects at different levels. Check the student’s actual Mathematics level and class materials when choosing practice.

Some entries are single words, such as coefficient. Others are established terms, such as highest common factor. Learn the whole term when its meaning depends on the complete phrase. Knowing the everyday meaning of common, for example, does not by itself explain what a common factor does in a calculation.

Contents · Next chapter

CHAPTER 2 OF 18 · Learn words 1–50

2. Words 1–10: Number types and factors

Back to contents

Begin by sorting examples. Ask whether a number belongs to a category, and then ask for a reason. This helps students separate a definition from a visual impression. A large number is not automatically composite, a negative number is not automatically a fraction, and a number written as a decimal may still be rational.

No.Word or termMeaning and useExample
1IntegerA whole-number value, including negative whole numbers and zero. An integer has no fractional part.The temperatures −3°C, 0°C and 7°C use integers; 2.5°C does not.
2Rational numberA number expressible as a fraction of two integers, with a non-zero denominator. Terminating decimals are included.0.75 is rational because it equals 3/4; −2 is rational because it equals −2/1.
3Real numberA number represented by a point on the number line. Real numbers include rational and irrational numbers.−5, 2/3 and √2 are real numbers, although √2 cannot be written as a fraction of integers.
4Prime numberAn integer greater than 1 with exactly two positive factors: 1 and itself.13 is prime because only 1 and 13 divide it exactly; 1 is not prime.
5Composite numberAn integer greater than 1 that has more than two positive factors.15 is composite: its positive factors are 1, 3, 5 and 15.
6FactorFor positive integers, a number that divides another exactly, leaving no remainder.6 is a factor of 42 because 42 ÷ 6 = 7 exactly.
7MultipleA number obtained by multiplying a given number by an integer. Positive multiples form a useful counting pattern.The first four positive multiples of 7 are 7, 14, 21 and 28.
8Prime factorisationWriting a positive integer greater than 1 as a product of prime numbers.60 = 2 × 2 × 3 × 5, so its prime factorisation is 2² × 3 × 5.
9Highest common factorThe greatest positive integer that divides each of the given positive integers exactly; abbreviated HCF.The common factors of 12 and 18 are 1, 2, 3 and 6, so the HCF is 6.
10Lowest common multipleThe smallest positive integer that is a multiple of every given positive integer; abbreviated LCM.The LCM of 4 and 6 is 12: it is the first positive number in both lists of multiples.
Number types and factors: entries 1–10

Contents · Previous chapter · Next chapter

CHAPTER 3 OF 18 · Learn words 1–50

3. Words 11–20: Operations and numerical accuracy

Back to contents

Read the requested precision before writing the final answer. Decimal places and significant figures answer different questions. Keep enough digits during working, and round at the point requested. When a calculator displays an unexpected result, an estimate can help you decide whether you entered the expression correctly.

No.Word or termMeaning and useExample
11SquareThe result of multiplying a number by itself. The superscript 2 records this operation.The square of −4 is 16 because (−4) × (−4) = 16.
12CubeThe result of multiplying three copies of the same number. It is written using a superscript 3.The cube of −2 is −8 because (−2) × (−2) × (−2) = −8.
13Square rootA number whose square gives the original number. The symbol √ denotes the non-negative square root.√49 = 7. Although (−7)² also equals 49, the expression √49 denotes 7.
14Cube rootThe real number that, when cubed, produces the original number.The cube root of −27 is −3 because (−3) × (−3) × (−3) = −27.
15ReciprocalFor a non-zero number, the number that multiplies with it to give 1.The reciprocal of 3/5 is 5/3. Zero has no reciprocal because division by zero is undefined.
16Negative numberA number less than zero. Its position lies to the left of zero on a standard number line.−8 is less than −3, even though 8 is greater than 3.
17Number lineA line on which numbers are positioned in order, with equal numerical differences represented by equal distances.Halfway between −2 and 0 is −1; numbers increase as you move to the right.
18EstimateAn approximate value found using reasonable simplifications. Use it to judge size or check a calculation.19.8 × 5.1 is approximately 20 × 5 = 100, so a calculator answer near 10 needs checking.
19Decimal placeA position after the decimal point. Rounding to two decimal places keeps the hundredths position.6.278 becomes 6.28 to two decimal places because the next digit is 8.
20Significant figureA digit counted from the first non-zero digit when stating numerical precision. Zeros within that count can matter.0.004072 becomes 0.00407 to three significant figures: the retained significant digits are 4, 0 and 7.
Operations and accuracy: entries 11–20

Contents · Previous chapter · Next chapter

CHAPTER 4 OF 18 · Learn words 1–50

4. Words 21–30: Ratio and percentage

Back to contents

Always name the quantities being compared. A ratio of boys to girls is different from a fraction of the whole class. In percentage questions, identify the amount treated as 100% before calculating. That small reading habit helps prevent an apparently sensible calculation from answering the wrong question.

No.Word or termMeaning and useExample
21RatioA comparison of quantities by division, written in a stated order. Convert matching measurements to consistent units first.For 6 red counters and 9 blue counters, the ratio red:blue is 6:9, or 2:3.
22Equivalent ratioA ratio describing the same relative amounts after every part is multiplied or divided by the same non-zero number.2:5 and 6:15 are equivalent because both parts of 2:5 were multiplied by 3.
23Simplest formA representation reduced as far as the relevant rules allow. For integer ratios, remove all common factors greater than 1.18:24 has simplest form 3:4 after both parts are divided by their HCF, 6.
24Unitary methodA method that finds the value of one unit or one ratio part before finding the required amount.Five identical notebooks cost $15; one costs $3, so eight cost $24 at the same unit price.
25PercentageA comparison expressed per hundred. The reference quantity must be clear and may differ between questions.12 out of 40 students is 30% because 12 ÷ 40 × 100% = 30%.
26Percentage pointA unit describing the arithmetic difference between two percentages. It differs from a relative percentage change.An attendance rate rising from 80% to 90% increases by 10 percentage points, not by 10%.
27Percentage increaseThe increase divided by the original quantity, expressed as a percentage of that original quantity.A price rising from $50 to $60 increases by $10, which is 20% of $50.
28Percentage decreaseThe decrease divided by the original quantity, expressed as a percentage of that original quantity.A price falling from $80 to $60 decreases by $20, which is 25% of $80.
29Reverse percentageFinding an original amount from a later amount after a stated percentage change.A $72 sale price after a 10% discount represents 90% of the original; $72 ÷ 0.9 = $80.
30Base quantityThe reference amount used for a comparison or percentage calculation. Identify it before choosing the denominator.If 30 is expressed as a percentage of 120, the base quantity is 120, giving 25%.
Ratio and percentage: entries 21–30

Contents · Previous chapter · Next chapter

CHAPTER 5 OF 18 · Learn words 1–50

5. Words 31–40: Rate, speed and units

Back to contents

Units explain what a number measures. Write them during working, especially when a question combines minutes and hours or metres and kilometres. Average speed uses the entire relevant distance and time. It is not generally found by adding two speeds and dividing by two.

No.Word or termMeaning and useExample
31RateA comparison describing how much of one quantity corresponds to an amount of another quantity.A tap delivering 18 litres in 3 minutes has an average flow rate of 6 litres per minute.
32Unit rateA rate written for one unit of the reference quantity, useful for comparing different-sized offers or situations.A 2 kg bag costing $8 has a unit price of $4 per kilogram.
33SpeedThe rate at which distance is covered. For a given interval, divide distance travelled by time taken.Covering 150 m in 30 s gives an average speed of 5 m/s over that interval.
34Constant speedA speed that remains unchanged, so equal distances are travelled in equal time intervals.At a constant speed of 4 m/s, a moving object covers 20 m in 5 seconds.
35Average speedThe total distance travelled divided by the total time taken for the journey being considered.A 12 km journey lasting 30 minutes has average speed 24 km/h, including any stops within that time.
36Elapsed timeThe amount of time that passes between a stated start and finish. Account for hour boundaries carefully.From 8:45 am to 10:10 am, the elapsed time is 1 hour 25 minutes.
37DistanceThe length travelled or separating locations, according to the context. Distance is expressed in length units.Walking 300 m to a shop and 300 m back gives a total travelled distance of 600 m.
38Conversion factorA factor based on equivalent measurements that changes the unit without changing the measured amount.Since 1 km = 1000 m, multiply a distance in kilometres by 1000 to express it in metres.
39UnitAn agreed reference amount used to state a measurement. A numerical answer needs the unit appropriate to the question.A length of 8 cm is different from 8 m; the numeral alone does not identify the length.
40Compound unitA measurement unit formed by combining units, often through division. Read both parts when interpreting a rate.In km/h, kilometres describe distance and hours describe time; 36 km/h equals 10 m/s.
Rate and units: entries 31–40

Contents · Previous chapter · Next chapter

CHAPTER 6 OF 18 · Learn words 1–50

6. Words 41–50: Read and manipulate algebra

Back to contents

Letters allow one mathematical statement to describe many possible situations. Begin with the role of each part before practising a rule. Ask a student to point to a coefficient, identify like terms and explain what is being substituted. A correct answer reached by copying steps may conceal uncertainty about these roles.

No.Word or termMeaning and useExample
41VariableA symbol representing a number that can vary or take a value specified by the situation.In the expression 4n, n might represent the number of notebooks bought at $4 each.
42ConstantA value that stays fixed within the mathematical situation being considered. A constant term contains no variable.In 3x + 7, the constant term is 7; changing x does not change that term.
43CoefficientThe numerical factor multiplying a variable or variable part in a term. Include its sign.In −6p + 2, the coefficient of p is −6; in p, the coefficient is 1.
44TermA part of an expression separated from other parts by addition or subtraction, with its sign included.The expression 5x − 3y + 8 has three terms: 5x, −3y and 8.
45Like termsTerms with the same variable part, including the same powers. Their coefficients can be combined through addition or subtraction.4a and −7a are like terms, so 4a − 7a = −3a; 4a and 4b are unlike.
46ExpressionA mathematical combination of numbers, variables and operations. An expression alone does not state that two quantities are equal.2x + 5 is an expression; 2x + 5 = 11 is an equation.
47EvaluateFind the numerical value of an expression, using any values supplied for its variables.Evaluate 3a + 4 when a = 2: substitute first, then calculate 3 × 2 + 4 = 10.
48SubstituteReplace a variable with the value or expression given for it. Use brackets when the replacement needs protection.If x = −3, then 2x² becomes 2(−3)² = 18, not 2 × −9.
49ExpandRemove brackets by distributing multiplication correctly to every term inside them.−2(3x − 4) expands to −6x + 8; the negative multiplier affects both terms.
50FactoriseWrite an expression as a product of factors. At this stage, practise extracting a common factor.6x + 9 factorises to 3(2x + 3); expanding the brackets checks that the expressions agree.
Algebraic language: entries 41–50

Contents · Previous chapter · Next chapter

CHAPTER 7 OF 18 · Learn words 51–100

7. Words 51–60: Equations, formulae and patterns

Back to contents

The instruction determines the job. Simplifying an expression changes its form; solving an equation finds values that make it true. When a letter stands for an unknown amount, say what it represents and include its unit. That statement helps connect the algebraic answer back to the original situation.

No.Word or termMeaning and useExample
51EquationA mathematical statement that two expressions are equal. An equation may be true only for particular variable values.3x + 2 = 14 is an equation; x = 4 makes its two sides equal.
52EqualityThe relationship of having the same value, indicated by the equals sign. Preserve it when transforming an equation.From x + 5 = 12, subtracting 5 from both sides preserves equality and gives x = 7.
53SolutionA value that makes an equation true when substituted into it. Check it in the original statement.For 2x − 3 = 9, x = 6 is a solution because 12 − 3 = 9.
54UnknownA quantity whose value is not yet known in a particular problem, often represented by a letter.Let n be the unknown number of tickets. If each costs $8, their total cost is 8n dollars.
55Linear equationAn equation that can be written with the variable to the first power only, without products of variables.5x − 7 = 18 is a linear equation in one variable; solving it gives x = 5.
56Inverse operationAn operation that reverses another under the relevant conditions. Use it on both sides when solving an equation.To undo multiplication by 4 in 4x = 20, divide both sides by 4.
57FormulaAn equation expressing a relationship between quantities, often using letters to represent them.A = lw gives the area of a rectangle from its length and width, measured in compatible units.
58SequenceAn ordered list of terms following a stated or inferred pattern. Position matters as well as value.In 4, 7, 10, 13, the fourth term is 13 and consecutive terms increase by 3.
59Nth termAn expression giving a sequence's term at position n. It connects position directly to value.For 4, 7, 10, 13, the nth term is 3n + 1, so the tenth term is 31.
60VerifyCheck that a result satisfies the original conditions, rather than merely repeating the same working.After obtaining x = 5 for 5x − 7 = 18, verify by calculating 25 − 7 = 18.
Equations and patterns: entries 51–60

Contents · Previous chapter · Next chapter

CHAPTER 8 OF 18 · Learn words 51–100

8. Words 61–70: Coordinates and linear graphs

Back to contents

A graph connects a relationship to a picture. Read labels and scales before interpreting its shape. A line that looks steep on one set of axes may look less steep when the drawing scale changes, even though the numerical gradient of the relationship remains the same.

No.Word or termMeaning and useExample
61CoordinateA number used to specify a point's position relative to coordinate axes. In two dimensions, two coordinates locate a point.For the point (3, −2), the x-coordinate is 3 and the y-coordinate is −2.
62Ordered pairTwo numbers written in a fixed order, usually (x, y), to represent a point or relationship.(2, 5) and (5, 2) usually locate different points because their first and second coordinates are exchanged.
63OriginThe point where the coordinate axes meet and both coordinates are zero.The origin is (0, 0); moving three units right and two up reaches (3, 2).
64X-axisThe horizontal axis in the usual Cartesian coordinate diagram. Points on it have y-coordinate zero.The point (−4, 0) lies on the x-axis, four units to the left of the origin.
65Y-axisThe vertical axis in the usual Cartesian coordinate diagram. Points on it have x-coordinate zero.The point (0, 6) lies on the y-axis, six units above the origin.
66QuadrantOne of the four regions formed by the x-axis and y-axis. Coordinate signs distinguish these regions.A point such as (−2, 4) lies in the second quadrant; points on an axis belong to no quadrant.
67Linear graphA straight-line graph representing a linear relationship. For y = ax + b, a and b are constants.Points (0, 1), (1, 3) and (2, 5) lie on the linear graph y = 2x + 1.
68GradientFor a non-vertical straight line, the vertical change divided by the corresponding horizontal change.If y rises by 6 while x increases by 3, the gradient is 6 ÷ 3 = 2.
69Horizontal changeThe change in x between two points, measured in the same chosen direction as the vertical change.Moving from x = 1 to x = 5 gives a horizontal change of 5 − 1 = 4.
70Vertical changeThe corresponding change in y between two points. It can be positive, negative or zero.Moving from y = 8 to y = 2 gives a vertical change of 2 − 8 = −6.
Coordinates and graphs: entries 61–70

Contents · Previous chapter · Next chapter

CHAPTER 9 OF 18 · Learn words 51–100

9. Words 71–80: Angles and line relationships

Back to contents

An angle fact needs a reason. Before saying that two angles are equal, identify the arrangement that supports the claim. Corresponding and alternate angles are equal when the relevant lines are parallel. A familiar-looking sketch is not enough if that condition has not been given or established.

No.Word or termMeaning and useExample
71Acute angleAn angle greater than 0° and less than 90°. It is smaller than a right angle.An angle of 38° is acute; an angle of exactly 90° is not.
72Obtuse angleAn angle greater than 90° and less than 180°. The endpoints are excluded.125° is obtuse, while 180° is a straight angle rather than an obtuse angle.
73Reflex angleAn angle greater than 180° and less than 360°, measured around the larger part of a turn.The reflex angle completing a full turn with a 70° angle is 360° − 70° = 290°.
74Right angleAn angle of exactly 90°. A small square in a diagram often marks it.Two perpendicular lines form four right angles where they meet, each measuring 90°.
75Vertically opposite anglesThe pair of opposite angles formed when two straight lines cross. Each such pair has equal size.If one angle at a crossing is 52°, the angle directly opposite it is also 52°.
76Parallel linesStraight lines in the same plane that never meet, however far they are extended.Parallel lines are often marked with matching arrows; equal-looking spacing in a sketch alone is not proof.
77TransversalA line that crosses two or more other lines at different points, creating related angle positions.When a transversal crosses two parallel lines, corresponding and alternate angle relationships help find unknown angles.
78Corresponding anglesAngles in matching relative positions where a transversal crosses two lines. They are equal when those lines are parallel.A 65° upper-right angle at one crossing matches the upper-right angle at the other parallel-line crossing.
79Alternate anglesAngles on opposite sides of a transversal in the relevant alternate positions; they are equal for parallel lines.For parallel lines, alternate interior angles measuring 3x° and 72° give 3x = 72, so x = 24.
80Co-interior anglesInterior angles on the same side of a transversal. For parallel lines, they add to 180°.If one co-interior angle is 115°, its partner between the parallel lines is 180° − 115° = 65°.
Angles and lines: entries 71–80

Contents · Previous chapter · Next chapter

CHAPTER 10 OF 18 · Learn words 51–100

10. Words 81–90: Shapes and measurement

Back to contents

Ask what is being measured: a boundary, a flat region, a surface or the space occupied by a solid. Then choose the formula and unit. For a composite figure, sketch the parts you will add or subtract. Check whether an internal edge should be counted in the outer perimeter.

No.Word or termMeaning and useExample
81PolygonA closed plane figure made from straight line segments. Curved boundaries do not form polygons.Triangles, pentagons and hexagons are polygons; a circle is not, because its boundary is curved.
82Regular polygonA polygon with all sides equal and all interior angles equal. Both conditions are required.A square is regular. A non-square rectangle has equal angles but unequal adjacent sides, so it is not regular.
83Interior angleAn angle inside a polygon between two adjacent sides. A convex n-sided polygon has interior-angle sum (n − 2) × 180°.A convex pentagon has interior-angle sum 3 × 180° = 540°.
84Exterior angleFor a convex polygon, the angle between a side and an extension of its adjacent side.A regular hexagon has exterior angles of 360° ÷ 6 = 60°, with one chosen at each vertex.
85PerimeterThe total length around the outside boundary of a plane figure. State it in length units.A rectangle measuring 7 cm by 4 cm has perimeter 2(7 + 4) = 22 cm.
86AreaThe size of a plane region, measured in square units. Select a formula matching the shape.A parallelogram with base 8 cm and perpendicular height 5 cm has area 40 cm².
87VolumeThe amount of three-dimensional space occupied by a solid, measured in cubic units.A cuboid measuring 5 cm by 3 cm by 2 cm has volume 30 cm³.
88Surface areaThe total area of the surfaces specified in a problem. An open container may exclude a top surface.A closed cube with side 3 cm has total surface area 6 × 3² = 54 cm².
89PrismA solid with a uniform polygonal cross-section along its length. Its volume is cross-sectional area multiplied by perpendicular length.A prism with cross-sectional area 12 cm² and perpendicular length 8 cm has volume 96 cm³.
90CylinderA solid with parallel circular ends and a uniform circular cross-section. A right circular cylinder has volume πr²h.For radius 3 cm and height 5 cm, the cylinder's volume is 45π cm³.
Shapes and measurement: entries 81–90

Contents · Previous chapter · Next chapter

CHAPTER 11 OF 18 · Learn words 51–100

11. Words 91–100: Data and mathematical explanations

Back to contents

A chart is a claim about information. Read its title, categories, key and scale before describing a pattern. When comparing two displays, consider whether the same data have been presented in ways that exaggerate a difference. An explanation should point to the relevant feature, not simply call a graph misleading.

No.Word or termMeaning and useExample
91DataInformation collected through observation, measurement, counting or responses. State what was collected and from whom or what.The numbers of library books borrowed by 20 students form a set of data about those students.
92FrequencyThe number of times a value or category occurs in the collected data.If 9 students choose football in a survey, football has frequency 9 in the results.
93TableAn arrangement of information in labelled rows and columns, allowing values and categories to be located systematically.A table of travel methods might list bus, train and walking beside the number of students using each.
94Bar graphA display using bars to compare values across categories. Equal numerical intervals should follow the stated scale.Bars for four CCA choices can compare their frequencies; read the vertical scale before comparing bar heights.
95PictogramA display using pictures or symbols to represent amounts. Its key states the value of each symbol.If one book symbol represents 4 books, three symbols represent 12 books and half a symbol represents 2.
96Line graphA display joining plotted values to show change across an ordered sequence, often time.A line graph of daily water use helps show changes from Monday to Friday; check the units first.
97Pie chartA circular display divided into sectors representing parts of a whole. The complete circle represents 100%.A category containing one quarter of the total uses a 90° sector because 360° × 1/4 = 90°.
98ScaleThe relationship between numerical values and the marked intervals or symbols used in a representation.If adjacent labelled grid lines represent 5 students, a bar reaching the third interval above zero represents 15.
99InterpretExplain what a mathematical result or representation means in its context, including relevant units and limits.A gradient of 3 litres per minute means the recorded volume increases by 3 litres each minute in that model.
100JustifyGive a mathematical reason supporting a statement or answer. Name the relevant property, calculation or evidence.Justify an angle of 70° by stating that it equals the given 70° alternate angle between parallel lines.
Data and explanations: entries 91–100

Contents · Previous chapter · Next chapter

CHAPTER 12 OF 18 · Use the words

12. Turn vocabulary into working: four examples

Back to contents

Recognising a word is a starting point. The next step is to connect it to the structure of a question. In each example below, identify the instruction, the quantities and the relationship before doing the arithmetic. The same procedure works when a question is presented in a new context.

Example 1: A ratio describes parts, not the whole

A group has red and blue counters in the ratio 3:5, with 48 counters altogether. The total contains eight equal ratio parts, so one part contains 48 ÷ 8 = 6 counters. There are 18 red counters and 30 blue counters. Check both conditions: 18 + 30 = 48 and 18:30 simplifies to 3:5. The red fraction of the whole is 3/8, not 3/5. Ask the learner to explain what the denominator represents in each comparison.

Example 2: Read the base in a reverse percentage

A bag costs $68 after a 15% discount. The original price represents 100%; the sale price represents 85%. Let the original price be p dollars. Then 0.85p = 68, giving p = 80. Check: 15% of $80 is $12, and $80 − $12 = $68. Adding 15% of $68 would use the wrong base quantity. The language tells us which amount owns the percentage before any calculation begins.

Example 3: Convert a sentence into an equation

Three identical folders and a $2 pen cost $17. Let f be the price of one folder in dollars. Three folders cost 3f dollars, so 3f + 2 = 17. Subtract 2 from both sides, then divide by 3: f = 5. The final answer is $5 per folder. If a student writes 3(f + 2), ask them to read that expression aloud: it charges for three pens, which the question did not describe.

Example 4: Describe a gradient with units

A graph records water volume against time. Between 2 minutes and 6 minutes, the volume rises from 7 litres to 19 litres along a straight line. The vertical change is 12 litres and the horizontal change is 4 minutes. The gradient is therefore 3 litres per minute. This describes the rate of increase over that straight-line interval. It does not mean the container started empty, or that the same rate must continue beyond the interval shown.

Contents · Previous chapter · Next chapter

CHAPTER 13 OF 18 · Use the words

13. Repair the confusions that change an answer

Back to contents

Factor and multiple: use one multiplication fact in both directions. From 4 × 6 = 24, 4 and 6 are factors of 24, while 24 is a multiple of each. Ask which numbers must divide exactly and which list keeps growing. This is more useful than remembering that one word usually produces a smaller answer.

Expression and equation: 5x − 2 can be simplified or evaluated if a value of x is supplied. The statement 5x − 2 = 18 can be solved. Do not invent an equals sign or a value for x just because the instruction feels incomplete. Return to the question and identify what information it gives.

Area and surface area: both use square units, but they may describe different parts of a diagram. A rectangular sheet has an area; a box has several surfaces. For an open box, identify which faces exist. For a cylinder, distinguish the curved surface from the two circular ends before adding anything.

Percentage and percentage point: a rise from 40% to 50% is 10 percentage points. Relative to the original 40%, the increase is 10 ÷ 40 × 100% = 25%. Write both statements in words. The second calculation compares the change with the original rate; it does not use the entire population as its denominator.

Contents · Previous chapter · Next chapter

CHAPTER 14 OF 18 · Use the words

14. Use the vocabulary in a three-learner session

Back to contents

A small group can make mathematical language audible. This sample activity is designed for three learners and can be used by a teacher, tutor or parent. Keep the problem close to what the students are learning at school. Choose six words from the topic the students are already studying and one short problem requiring those words.

Give the first learner the role of reader: identify the instruction, quantities and units. The second learner proposes a method and explains why it fits. The third checks the reasoning against the original conditions and asks one precise question. Then all three complete a related question independently. Rotate the roles so that each learner must read, explain and check.

For example, use a ratio problem with the words ratio, simplest form, unitary method, variable, equation and verify. A learner who can calculate quickly may still need to explain why the total contains eight parts. A learner who explains clearly may need support setting out the calculation. Keep those observations separate so the next task addresses the actual difficulty.

Finish with an individual exit task: write one correct example and one tempting incorrect example for a selected term. Ask for the correction as well. For coefficient, a student might wrongly give 6 as the coefficient in −6x; the correction must include the negative sign. This short task reveals more than asking the group whether everybody understands.

Contents · Previous chapter · Next chapter

CHAPTER 15 OF 18 · Practise and check

15. An adjustable five-week vocabulary routine

Back to contents

Use five weeks as a planning example, not a deadline for mastering Mathematics. Two groups of ten entries per week would cover this list, but school topics and the student’s starting point should decide the order. Reduce the number of new words when the underlying concepts are unfamiliar. There is little value in recalling a definition while being unable to recognise an example.

For each study session, choose three to five terms. Read the meanings, close the guide and explain them in ordinary language. Write a correct example, then solve a short question in which the words matter. Revisit the same terms on another day using different numbers or a different context. Keep the practice short enough that the student can concentrate on the reason for each step.

Week one might focus on number types and numerical accuracy; week two on ratios, percentages and rates; week three on algebra and equations; week four on graphs and geometry; and week five on measurement, data and mixed review. If the school is currently teaching angles, start there and bring earlier topics into the review questions. Coverage order should serve learning rather than control it.

Keep a simple record with three columns: I can explain it, I can recognise it, and I can use it independently. A word can move backwards as well as forwards when a harder example exposes a gap. Record the troublesome example instead of treating the change as failure. The eduKate Vocabulary Learning System provides a wider route from meaning to use and transfer.

Contents · Previous chapter · Next chapter

CHAPTER 16 OF 18 · Practise and check

16. Check understanding with eight short tasks

Back to contents

Try these tasks without the tables first. They are practice questions written for this guide, not an official examination or a prediction of school results. After checking the answers, identify whether an error came from vocabulary, a concept, arithmetic, units or incomplete reading. That distinction tells you what to practise next.

  1. Explain why 1 is not a prime number.
  2. Write 0.006284 to three significant figures.
  3. A quantity rises from 80 to 100. Find its percentage increase.
  4. Evaluate −3a + 2 when a = −4.
  5. Solve 4x + 3 = 27 and verify the result.
  6. On a straight-line graph, y decreases by 9 when x increases by 3. Find the gradient.
  7. An open cuboid box has length 6 cm, width 4 cm and height 3 cm. Find the area of material for its base and four sides, ignoring thickness.
  8. A pictogram uses one symbol for 6 students. What do two and a half symbols represent?

Answers and the reasoning to check

1. A prime number has exactly two positive factors. The number 1 has only one positive factor, itself. 2. 0.00628: count the significant digits from 6, then use the next digit, 4, to decide rounding. 3. The increase is 20 and the original quantity is 80, so the percentage increase is 25%.

4. −3(−4) + 2 = 14; brackets make the negative substitution clear. 5. Subtracting 3 and dividing by 4 gives x = 6. Verification gives 4 × 6 + 3 = 27. 6. The gradient is −9 ÷ 3 = −3. The negative sign describes a decrease in y as x increases.

7. The base area is 6 × 4 = 24 cm². Two long sides contribute 2 × 6 × 3 = 36 cm²; two short sides contribute 2 × 4 × 3 = 24 cm². Total material area is 84 cm². There is no top to include. 8. Two and a half symbols represent 2.5 × 6 = 15 students.

A student who gets an answer wrong should explain the attempted method before correcting it. For the box, confusing volume with surface area calls for a sketch and labelled faces. For the percentage, choosing 100 as the denominator calls for identifying the original amount. Repeating the same worksheet without that diagnosis may leave the misunderstanding intact.

Contents · Previous chapter · Next chapter

CHAPTER 17 OF 18 · Practise and check

17. What parents can ask and what progress looks like

Back to contents

You do not need to remember every secondary-school method to have a useful conversation. Ask: What does the question want? Which quantity is the starting amount? Why is that angle equal? What does your answer mean here? Can you check it another way? Allow time for the student to answer before offering a hint. A hesitant but accurate explanation is valuable evidence of thinking.

Look for changes in independent work. The student may begin noticing a missing unit, distinguishing an expression from an equation or checking a percentage against its original amount. These improvements can appear before a large change in a test score. Keep a few dated examples so that progress is visible and specific rather than based only on an impression.

When a difficulty persists, bring the actual question, the student’s attempted solution and the teacher’s comments to a discussion with the school or tutor. Saying that algebra is weak is less useful than showing that the student expands brackets accurately but cannot turn a word problem into an equation. The more precise the evidence, the easier it is to choose a helpful next lesson.

Must all 100 terms be memorised before school starts?

No. Use the list alongside learning. Begin with familiar primary-school ideas and the first topics taught in class. Words become more useful when students connect them to diagrams, examples and decisions. A manageable set used accurately is a better starting point than a rushed attempt to recite every entry.

Can a student explain a term in another language first?

Yes, as a practical bridge to meaning. Then return to the English term used in the question and produce an English explanation that the student can understand. Check technical phrases carefully: a direct translation of individual words may not preserve the mathematical relationship. Keep the notation, example and explanation connected.

Does knowing this list guarantee a high grade?

No. Vocabulary supports understanding, but students must also learn concepts, carry out methods, solve unfamiliar problems and communicate accurate working. Use errors to choose the next step. The immediate goal is to make the language of the current topic usable, so that the student can participate more independently in the next lesson.

Contents · Previous chapter · Next chapter

CHAPTER 18 OF 18 · Practise and check

18. Official sources and further learning

Back to contents

The government sources below support curriculum scope and terminology. The word selection, definitions, examples and practice activities are eduKate teaching material. Source scope was checked on 16 November 2026; use your school’s current instructions for the work being assessed.

  1. MOE G2 and G3 Mathematics syllabuses — G3 Secondary One content is on printed pages 15–16. Curriculum scope checked 16 November 2026. Definitions, examples and practice questions in this guide are original teaching material.
  2. MOE Education Statistics Digest 2025 — Background on Full Subject-Based Banding and the G1, G2 and G3 subject levels.
  3. MOE Full Subject-Based Banding infographic — Illustrates the distinction between Posting Groups used for admission and the subject levels students take.

Continue learning with eduKate

Use the Vocabulary Learning System to choose further practice in meaning, use and transfer. Return to the part of this guide that helps with the student’s current schoolwork.

Contents · Previous chapter · Continue to the Vocabulary Learning System

Explore the connected learning guides

Choose the question that brought you here. Open one useful guide, try a small task, and stop when you have what you need.

Take one question further

The same learning habit can travel across subjects, while each subject keeps its own methods. These routes help you notice a difficulty, understand one part of it, and return to something you can do.

A word is familiar, but using it is difficult.

Move from recognising a word to retrieving it in a new context. Understand vocabulary plateaus.

Try it without the guide: Choose one word you already know. Close the guide and use it in a new sentence. Explain why it fits; try another context tomorrow.

A piece of writing has ideas, but the reader loses the thread.

Make the order of events and the links between sentences clear. Explore composition writing.

Try it without the guide: Choose one short paragraph. Read the relevant explanation, close it, and revise the paragraph. Ask someone to tell you what happened and why.

The Mathematics seems familiar, but marks still disappear.

Find the first point where the working stops being reliable. Find Secondary 4 A-Math mark leakage.

Try it without the guide: For a Secondary 4 A-Math question you have attempted, locate the first uncertain line. Repair that step, then try a comparable question without the worked answer.

A Science fact is remembered, but the explanation is incomplete.

Connect the evidence to a scientific idea and the resulting change. Follow the Primary Science learning route.

Try it without the guide: Choose a familiar Primary Science example. Explain the evidence, the idea and the result without notes. Then change one condition and explain your prediction.

Two accounts of the world seem to disagree.

Check the question, source, date and evidence before combining claims. Explore the World Knowledge research library.

Try it without the guide: Take one claim. Find the source best placed to support it, note its date, and state what remains uncertain. Return to your original question.

There is plenty of help, but independence is hard to see.

Check what the learner can understand and do after support is removed. Understand how education works.

Try it without the guide: Choose one small task the child has practised. Agree on a calm, brief attempt without prompts. Use what happens to choose one next step, then stop.

For the structure behind these connections, read the eduKateSingapore runtime manifest and the eduKate ecosystem boot contract. The reader map describes public navigation; those manifests preserve the wider ownership and return rules.