Secondary 3 G3 Physics vocabulary helps students turn questions about movement, energy, heat, waves and electricity into clear scientific explanations. This guide teaches 100 useful words and technical expressions through plain meanings, original examples and short applications. Learn each term together with its quantity, unit, direction or condition where relevant: knowing that velocity includes direction is more useful than merely remembering its spelling.
For students and parents considering Physics small groups tuition, the useful question is whether a student can use the language independently in a diagram, calculation or explanation. These 100 terms form an eduKate teaching selection, not an official SEAB vocabulary list, a ranking by examination frequency or a guarantee of complete syllabus coverage. Start with the topics on the school’s current plan, repair misunderstandings in small steps, and revisit the words in unfamiliar questions before adding more.
- Who this is for: Secondary 3 students studying standalone G3 Physics, with parents helping them organise learning.
- What to learn: 100 numbered terms covering measurement, mechanics, thermal physics, waves, electricity, radioactivity, practical work and question instructions.
- How to practise: explain a meaning, connect it to a diagram or equation, apply it, then check the conditions and units.
- Where to begin: choose the school’s current chapter and the earliest missing prerequisite; the ten groups are not a prescribed Secondary 3 teaching sequence.
- What to check: the student’s actual subject code, examination year and school assessment scope.
- What improvement looks like: more accurate explanations, fewer unit mistakes and better decisions about which relationship to use.
CHAPTER 1 OF 20 · Understand the course
1. Understand the subject and the examination year
SEAB’s 2027 G3 syllabus index identifies standalone Physics as K323. It separately lists Science (Physics, Chemistry), K326, and Science (Physics, Biology), K327. These routes share ideas but have different syllabuses. A student should use the document matching the subject registered through school. A resource labelled “Physics” does not automatically cover the correct combined or standalone course.
The 2027 K323 Physics syllabus covers measurement, mechanics, thermal physics, waves, electricity and magnetism, and radioactivity. It includes scientific vocabulary, problem solving and experimental skills, together with a glossary of question instructions. This article supplies original learning examples around that broad scope. It does not reproduce the syllabus or prescribe which topics every school must teach in Secondary 3.
The Singapore-Cambridge SEC begins in 2027. Assuming ordinary progression from Secondary 3 to Secondary 4, a student in Secondary 3 in 2026 would usually prepare for the 2027 SEC, while a student entering Secondary 3 in 2027 would usually reach the SEC in 2028. That is a progression guide, not confirmation of an individual registration or a 2028 syllabus. Confirm the examination year and use the corresponding document when available.
Place the school topic list beside this guide. Mark each group “learning now”, “already taught” or “later”. A student currently studying forces should not feel behind because transformers have not appeared in class. At the same time, familiar words such as pressure deserve attention: everyday meanings can hide an incomplete scientific understanding.
If reading the question is the obstacle, begin with the instruction words and identify the quantities named in one short question. If calculations are the obstacle, work on units, variables and the meanings of equations. If explanations are the obstacle, practise linking a cause to a mechanism and then to an observable result. A student may need more than one route, but a small clear target makes each session manageable.
For every new term, write four things: its meaning in your own words, a useful diagram or symbol, an example, and one condition or contrasting idea. For instance, a card for “moment” needs a pivot and a perpendicular distance. A card that says only “turning effect” is a beginning; the picture makes the definition usable.
CHAPTER 3 OF 20 · Learn the 100 terms
3. Words 1–10: measurement and scientific quantities
- Physical quantity — A measurable property described using a value and, usually, a unit. Example: a length of 0.45 m identifies both how much was measured and the measurement standard used.
- SI unit — A unit belonging to the International System of Units. Example: record a trolley’s mass as 0.80 kg before substituting it into an equation requiring kilograms.
- Scalar — A quantity with magnitude but no direction. Example: a journey lasting 12 s has a time interval; assigning “east” to that time interval would add no scientific meaning.
- Vector — A quantity requiring both magnitude and direction. Example: a displacement of 6 m north differs from a displacement of 6 m south, despite their equal magnitudes.
- Magnitude — The size of a quantity, without specifying its direction. Example: velocities of 4 m/s east and 4 m/s west have the same magnitude but different directions.
- Resolution — The smallest change an instrument can distinguish in its reading. Example: a digital balance displaying steps of 0.01 g has finer resolution than one displaying whole grams.
- Zero error — A nonzero instrument reading when the quantity being measured should be zero. Example: an unloaded balance reading +0.20 g needs that offset considered when correcting later readings.
- Random error — Unpredictable variation that makes repeated measurements scatter. Example: slightly different stopwatch reactions produce different times for repeated trials; averaging can reduce their effect on the estimated time.
- Systematic error — An error that consistently shifts results according to a pattern. Example: a ruler with a damaged starting edge may make every length wrong when that edge is treated as zero.
- Uncertainty — An estimate of the doubt associated with a measurement, often expressed as a range around the reported value. Example: extra calculator digits do not remove uncertainty from a length estimated between coarse ruler markings.
A useful check is to ask whether a more detailed display solves the actual problem. A balance can show many decimal places and still have a zero error. Precision in presentation does not automatically establish accuracy.
- Distance — The total length of the route travelled. Example: walking 5 m forward and then 2 m back gives a distance of 7 m.
- Displacement — The change in position from the starting point to the finishing point, with direction. Example: the same walk gives a displacement of 3 m forward.
- Speed — The rate at which distance is travelled. Example: travelling 18 m in 6 s gives an average speed of 3 m/s, even if the speed varied during the journey.
- Velocity — The rate of change of displacement. Example: a cyclist travelling at 5 m/s east has a different velocity after turning north, even if the speed remains 5 m/s.
- Acceleration — The rate of change of velocity. Example: increasing velocity from 2 m/s to 8 m/s east in 3 s gives an average acceleration of 2 m/s² east.
- Deceleration — A decrease in speed. Example: a train moving east slows when its acceleration is westward; a negative acceleration is not always deceleration because the chosen direction matters.
- Gradient — The change in the vertical-axis quantity divided by the corresponding change in the horizontal-axis quantity. Example: a velocity–time graph gradient has units of acceleration.
- Resultant force — The single force representing the vector sum of all forces on an object. Example: 9 N right and 4 N left combine to give 5 N right.
- Inertia — An object’s resistance to a change in its velocity. Example: a more massive trolley requires a larger resultant force to produce the same acceleration.
- Terminal velocity — A constant falling velocity reached when the resultant force becomes zero. Example: upward air resistance balances a falling object’s weight, so its downward velocity stops increasing.
Separate the description of motion from its cause. A velocity–time graph describes what happens; a force diagram helps explain why. Constant velocity requires zero resultant force, although several individual forces may still act.
- Force — An interaction that can change an object’s motion or shape. Example: a spring exerts a force on a hanging load; the load also exerts a force on the spring.
- Mass — A measure of the amount of matter in a body, expressed in kilograms; mass also determines its inertia. Example: a 2 kg object retains its mass when moved somewhere with a different gravitational field strength.
- Weight — The gravitational force acting on an object. Example: where gravitational field strength is 10 N/kg, a mass of 2 kg has a weight of 20 N.
- Gravitational field strength — The gravitational force per unit mass at a location. Example: a value of 10 N/kg means each kilogram experiences a gravitational force of 10 N.
- Friction — A contact force opposing relative sliding or the tendency to slide between surfaces. Example: friction on a slipping book acts against its sliding along the desk.
- Normal contact force — A contact force perpendicular to a surface. Example: a level desk exerts an upward normal force on a resting book; the force is not always equal to weight in other situations.
- Moment — The turning effect of a force about a pivot, calculated using force times perpendicular distance from the pivot to its line of action. Example: a longer spanner can increase the moment.
- Pivot — The point or axis about which turning occurs. Example: the hinge provides a pivot for a door, while a push near the handle can produce a turning effect.
- Centre of gravity — The point through which an object’s overall weight may be considered to act. Example: a uniform ruler has its centre of gravity at its midpoint.
- Equilibrium — A condition with no resultant force and, for rotational equilibrium, no resultant moment. Example: a balanced stationary beam has matching clockwise and anticlockwise moments about its support.
When drawing a force diagram, name the object being analysed before drawing arrows. The two forces in an action–reaction pair act on different objects; placing both on one object’s diagram creates a misleading balance.
- Work done — Energy transferred by a force when displacement occurs along the force’s direction. Example: a constant 6 N force moving an object 2 m in its direction does 12 J of work.
- Energy — A conserved quantity that can be transferred between objects or systems and associated with different stores. Example: an electric motor transfers energy to a raised load and its surroundings.
- Kinetic energy — Energy associated with motion. Example: doubling a trolley’s speed, with its mass unchanged, multiplies its kinetic energy by four because the calculation contains speed squared.
- Gravitational potential energy — Energy associated with position in a gravitational field. Example: lifting the same mass through a greater vertical height increases its gravitational potential energy by a larger amount.
- Conservation of energy — The principle that energy is not created or destroyed. Example: energy that appears “lost” from a moving toy may have been transferred to thermal stores and sound.
- Power — The rate of energy transfer or work done. Example: transferring 240 J in 12 s gives an average power of 20 W.
- Efficiency — The fraction of input energy or power producing the intended useful output. Example: a machine delivering 60 J usefully from 100 J supplied has an efficiency of 60%.
- Density — Mass per unit volume. Example: a sample with mass 80 g and volume 20 cm³ has a density of 4 g/cm³.
- Pressure — Normal force per unit area. Example: the same force produces greater pressure when applied over a smaller area, which helps explain why a sharp blade cuts more easily.
- Atmospheric pressure — Pressure exerted by the surrounding air. Example: a drinking straw works because a pressure difference drives liquid upward; the liquid is not pulled up by a vacuum force.
Words such as “used”, “lost” and “produced” need care in energy answers. State what receives the energy and how it is transferred. A conservation statement becomes useful when the system and its surroundings are identified.
- Temperature — A quantity indicating the thermal state of a body and the direction of spontaneous thermal energy transfer. Example: energy transfers from a hotter cup to cooler surroundings.
- Internal energy — The total microscopic kinetic and potential energies of the particles in a system. Example: melting ice can increase its internal energy without increasing its temperature during the change of state.
- Thermal equilibrium — A condition in which bodies have the same temperature and no net thermal energy transfer occurs between them. Example: a thermometer settles to the temperature of the water it measures.
- Conduction — Thermal energy transfer through a material without overall movement of the material. Example: the handle of a metal spoon warms when its other end remains in hot water.
- Convection — Thermal energy transfer by bulk movement of a fluid. Example: warmer, less dense water can rise while cooler, denser water sinks, forming a circulation.
- Thermal radiation — Energy transfer by electromagnetic radiation associated with a body’s temperature. Example: a warm object can lose energy by radiation even across a vacuum.
- Specific heat capacity — Energy needed per unit mass for a unit temperature increase without a change of state. Example: 2 kg of a material needs twice the energy of 1 kg for the same rise.
- Specific latent heat — Energy transferred per unit mass during a particular change of state without a temperature change. Example: melting and boiling require different specific latent heats for the same substance.
- Evaporation — Escape of particles from a liquid surface to form vapour. Example: water can evaporate below its boiling point, and the remaining liquid may cool as higher-energy particles escape.
- Boiling — Vaporisation throughout a liquid, with bubbles forming at its boiling temperature for the surrounding pressure. Example: water’s boiling temperature changes when the external pressure changes.
Avoid saying “cold travels into the cup” when describing cooling. Follow the thermal energy transfer instead. Also distinguish a temperature change from an energy change: they are related, but a change of state shows why they are not interchangeable.
- Oscillation — Repeated variation or movement about an equilibrium position. Example: one complete swing cycle returns a pendulum to the same position while moving in the same direction.
- Amplitude — The maximum displacement from an equilibrium position. Example: measuring from a water wave’s mean level to its crest gives amplitude; crest-to-trough height is twice that value for a symmetrical wave.
- Period — The time for one complete oscillation. Example: if ten complete oscillations take 8 s, the period is 0.8 s.
- Frequency — The number of complete oscillations per second. Example: a frequency of 5 Hz means five complete cycles occur each second.
- Wavelength — The distance between adjacent points on a wave at the same phase. Example: the distance from one crest to the next crest is one wavelength.
- Transverse wave — A wave with oscillations perpendicular to the direction of energy transfer. Example: particles in a stretched string move up and down while the disturbance travels horizontally.
- Longitudinal wave — A wave with oscillations parallel to the direction of energy transfer. Example: air particles oscillate backwards and forwards as a sound wave travels through air.
- Reflection — The return of a wave from a boundary into its original medium. Example: a mirror reflects light, and angles are measured from the normal rather than the mirror surface.
- Refraction — A change in wave speed across a boundary that can change its direction. Example: light entering glass obliquely from air bends towards the normal.
- Total internal reflection — Complete reflection at a boundary when light travels towards a lower refractive index and the incidence angle exceeds the critical angle. Example: suitable optical fibres confine light through repeated reflections.
A wave transfers energy without transporting the medium along with the wave over long distances. Watch one marked point on a string in a sketch: its local movement should be distinguished from the travelling disturbance.
- Electric charge — A property associated with electrical interactions, measured in coulombs. Example: rubbing two suitable materials can transfer electrons; it does not create charge from nothing.
- Electric current — The rate of flow of charge. Example: 12 C passing a point in 4 s corresponds to an average current of 3 A.
- Potential difference — Work done or energy transferred per unit charge between two points. Example: a lamp with 6 V across it transfers 6 J for every coulomb passing through it.
- Electromotive force — Energy supplied by a source per unit charge. Example: an ideal 9 V battery supplies 9 J per coulomb; despite the name, electromotive force is measured in volts.
- Resistance — Potential difference divided by current for a component at its operating condition. Example: 6 V across a component carrying 2 A gives a resistance of 3 Ω.
- Ohmic conductor — A conductor with current proportional to potential difference when its physical conditions remain constant. Example: a metal resistor can behave this way when its temperature is kept steady.
- Series circuit — A circuit arrangement in which components lie along a single current path. Example: the same current passes through two resistors connected in series.
- Parallel circuit — An arrangement with branches connected across the same two points. Example: parallel lamps have the same potential difference across them, while branch currents need not be equal.
- Fuse — A protective component designed to melt and interrupt a circuit when excessive current flows. Example: choosing a fuse involves considering the normal operating current and the protection required.
- Earthing — Connecting exposed conductive parts to Earth through a suitable protective path. Example: an earth connection can allow a fault current to operate protection if a live wire touches a metal case.
In a circuit explanation, current is not “used up” by the first lamp. Charge continues around a closed circuit while energy is transferred. Use circuit diagrams and low-voltage school apparatus for learning; household mains wiring is not a practice activity.
CHAPTER 10 OF 20 · Learn the 100 terms
10. Words 71–80: magnetic effects and radioactivity
- Magnetic field — A region in which magnetic effects can be detected. Example: a small compass shows a direction associated with the field at its position near a magnet.
- Electromagnet — A magnet produced using an electric current, commonly through a coil with a suitable core. Example: switching off the current can greatly reduce an electromagnet’s magnetic effect.
- Electromagnetic induction — Production of an electromotive force through changing magnetic linkage. Example: moving a magnet relative to a coil can produce an induced electromotive force; a stationary arrangement need not.
- Transformer — A device transferring energy between circuits using changing magnetic fields. Example: an ideal transformer with more secondary turns increases alternating voltage while reducing the corresponding current for equal power.
- Radioactive decay — Spontaneous, random change of an unstable atomic nucleus with radiation emitted. Example: the decay time of one particular nucleus cannot be predicted, even when a large sample follows a predictable pattern.
- Half-life — The time for the number of undecayed nuclei in a large sample to fall to half its initial value on average. Example: two half-lives leave one quarter on average.
- Alpha radiation — Radiation consisting of helium nuclei, each containing two protons and two neutrons. Example: its short penetration range does not make an alpha-emitting material harmless if it enters the body.
- Beta radiation — In beta-minus decay, fast electrons emitted through changes inside an unstable nucleus. Example: these electrons originate from the nuclear process, not from electrons being shaken out of atomic shells.
- Gamma radiation — High-energy electromagnetic radiation emitted from a nucleus. Example: gamma radiation has no electric charge and is not deflected by an electric field.
- Background radiation — Ionising radiation detected from surroundings even without the source being investigated. Example: subtract the mean background count rate before interpreting a source’s corrected count rate.
Words ending in “radiation” do not all describe the same process. Thermal radiation and gamma radiation are electromagnetic, while alpha radiation consists of particles. Specify the process instead of treating the shared word as a complete explanation.
- Independent variable — The quantity deliberately changed in an investigation. Example: when investigating how pendulum length affects period, the selected pendulum length is the independent variable.
- Dependent variable — The quantity measured to investigate the effect of a change. Example: the measured pendulum period is the dependent variable when different lengths are tested.
- Controlled variable — A relevant factor kept unchanged to make a comparison meaningful. Example: keeping the initial swing angle small and consistent helps when investigating pendulum length.
- Hypothesis — A proposed, testable relationship or explanation. Example: “Increasing the pendulum length increases its period” can be investigated using measurements across several lengths.
- Calibration — Comparing an instrument’s response with known standards to establish or check its scale. Example: checking a force sensor against known loads can reveal an offset or scale problem.
- Parallax error — A reading error caused by viewing a scale from an unsuitable angle. Example: looking sideways at a pointer can make it appear aligned with the wrong marking.
- Repeatability — Agreement between repeated measurements made under the same conditions. Example: closely grouped repeated times suggest good repeatability, but a shared timing bias may still affect accuracy.
- Anomaly — A result that does not fit the pattern suggested by the other measurements. Example: one unusually long time warrants investigation and repetition, not automatic deletion without explanation.
- Best-fit line — A line representing the overall relationship in plotted data while allowing for scatter. Example: a straight best-fit line need not pass through every point or the origin.
- Direct proportionality — A relationship in which one quantity varies as a constant multiple of another. Example: it gives a straight-line graph through the origin when the quantities themselves are plotted.
A practical answer should name the actual variable and measurement. “Keep everything the same” is less useful than “use the same wire material and diameter while changing its length”. Specific language turns a general intention into an investigation that another person can understand.
CHAPTER 12 OF 20 · Learn the 100 terms
12. Words 91–100: instructions that shape an answer
The following are practical teaching explanations with original tasks. Use the K323 glossary and the exact question wording to check the required response.
- State — Give the requested fact directly. Example: if asked to state the unit of power, write “watt, W”; an unrelated account of energy transfer does not improve that response.
- Define — Give the precise meaning of a term. Example: a definition of acceleration needs change in velocity per unit time, not simply the phrase “moving faster”.
- Describe — Say what happens or what a pattern looks like. Example: describe a graph by identifying an increase followed by a constant value, referring to the relevant intervals.
- Explain — Connect an outcome to the scientific reasons producing it. Example: explain an acceleration by identifying a nonzero resultant force, rather than repeating that the object gets faster.
- Calculate — Use numerical information and a suitable relationship to obtain a result. Example: show the substitution for density, carry out the division, and supply the correct unit.
- Determine — Obtain the required quantity using the available information or method. Example: determine a graph’s gradient using well-separated points on the best-fit line and the labelled scales.
- Deduce — Reach a conclusion from the given evidence and relevant principles. Example: deduce zero acceleration from a constant velocity, then connect that result to the resultant force.
- Predict — Give an expected outcome supported by a physical relationship. Example: predict a smaller pressure when the same normal force acts over a larger area.
- Suggest — Offer a scientifically reasonable answer that fits the stated circumstances. Example: suggest timing several oscillations together to reduce the relative effect of reaction time.
- Sketch — Draw the important features of the requested diagram or graph clearly. Example: a motion-graph sketch still needs appropriate axes, shape and relevant labelled values even without precise plotting.
CHAPTER 13 OF 20 · Practise and check
13. Repair five misunderstandings before memorising more
“A moving object must have a forward resultant force.” Start with a trolley already travelling at constant velocity. Its acceleration is zero, so its resultant force is zero. In a real situation, a driving force may balance resistance. The distinction is between the individual forces and their vector sum.
“Negative acceleration always means slowing down.” Choose east as positive. A westward-moving object has negative velocity. If it accelerates further west, both velocity and acceleration are negative and its speed increases. Ask whether velocity and acceleration point in the same or opposite directions.
“Heating always raises temperature.” Consider a substance undergoing a change of state at constant pressure. Energy transfer may change the particle arrangement without increasing temperature during the transition. A temperature graph and a particle explanation should describe the same event.
“A bigger current means a bigger voltage in every situation.” The relationship depends on the component and its conditions. For an ohmic conductor at constant temperature, current is proportional to potential difference. A filament lamp heats significantly, so its resistance changes. Do not remove the condition from the statement.
“A repeatable result must be correct.” Repetition checks consistency. An instrument with a constant offset can produce closely grouped wrong readings. Look separately for scatter, zero error, calibration issues and an unsuitable method. Each problem suggests a different improvement.
A journey with a return section
A student walks 24 m east in 12 s, then 6 m west in 3 s. Find the average speed and average velocity for the whole journey. The total time is 15 s. Distance adds the lengths travelled: 24 + 6 = 30 m. Average speed is therefore 30 ÷ 15 = 2.0 m/s. Taking east as positive, displacement is 24 − 6 = 18 m east. Average velocity is 18 ÷ 15 = 1.2 m/s east.
The different answers are not contradictory: they answer different questions. A strong check asks whether the return section increases distance while reducing the final displacement. If both calculations use 30 m, reread the meanings before repeating the arithmetic.
From a force diagram to an acceleration
A 4.0 kg trolley experiences 18 N to the right and 6 N to the left on a level track. Its vertical forces balance. The horizontal resultant is 18 − 6 = 12 N right. Using F = ma gives a = 12 ÷ 4.0 = 3.0 m/s² right. The force needed in this equation is the resultant, not automatically the larger force shown.
If the leftward force later rises to 18 N, the horizontal resultant becomes zero. The trolley then has zero horizontal acceleration. That statement alone does not establish that the trolley stops; its existing velocity must also be considered.
A motor lifting a load
A motor lifts a 5.0 kg load vertically through 1.8 m in 3.0 s at constant speed. Use g = 10 N/kg for this example. The increase in gravitational potential energy is mgh = 5.0 × 10 × 1.8 = 90 J. The useful average output power is 90 ÷ 3.0 = 30 W. If the input electrical power is 50 W, efficiency is 30 ÷ 50 × 100% = 60%.
The remaining input energy has not vanished. It is transferred in other ways, such as heating the motor and surroundings. “Useful” depends on the intended task: lifting the load is the useful output defined here.
Heating without a change of state
An idealised heater supplies 1,200 J to 0.20 kg of a material with specific heat capacity 600 J/(kg °C). Assume no energy transfer to the container or surroundings and no change of state. From E = mcΔT, the temperature rise is 1,200 ÷ (0.20 × 600) = 10 °C. If the starting temperature is 22 °C, the final temperature is 32 °C.
Circle the assumptions. In a real experiment, energy transferred to the surroundings would generally make the rise smaller for the same supplied energy. A successful answer distinguishes temperature rise from final temperature and energy input from energy retained by the sample.
CHAPTER 15 OF 20 · Plan useful support
15. What a useful three-student lesson could look like
The following is an illustrative 3-pax learning design, not a claim about a particular class timetable. Begin with a short independent question before discussion. Three students may all obtain the wrong answer for different reasons: one confuses displacement with distance, another divides by the wrong time, and a third loses the direction. Their next tasks should reflect those differences.
Use a single situation, such as a trolley crossing a marked track. One student describes the motion, a second draws the force diagram, and a third checks the units in a calculation. Then rotate the roles. Every student must eventually perform all three tasks independently; assigning permanent roles could conceal a weakness.
Ask each student to repair one sentence. “The trolley has force because it moves” becomes “The trolley accelerates because the forces on it have a nonzero resultant.” Discuss what additional information is needed before deciding the direction. The teacher can then change the numbers or reverse the motion so that students must reason again.
End with an unseen question completed separately. Keep a brief record of the word, the mistaken idea, the corrected explanation and a later check date. Parents can ask what the student can now explain without prompting, rather than how many pages were completed.
CHAPTER 16 OF 20 · Plan useful support
16. A four-week vocabulary plan that follows school learning
Week 1: establish meanings. Select ten to fifteen terms from the current school chapter and its prerequisites. Sort them into “can explain”, “recognise but cannot use” and “unfamiliar”. Draw a small diagram for the middle group. Do not copy the whole list as a substitute for checking understanding.
Week 2: connect representations. Move between words, symbols, graphs and measurements. A student learning acceleration should explain a velocity–time gradient and attach its unit. A student learning pressure should identify both the normal force and the contact area. Use short tasks whose purpose is visible.
Week 3: compare and correct. Pair easily confused terms: mass and weight, temperature and internal energy, current and potential difference. Give one correct example and one example that does not fit. Correct a previously wrong answer from the beginning, including the reasoning, instead of replacing only its final number.
Week 4: apply after a delay. Revisit earlier words without showing the definitions first. Mix a familiar problem with a changed context. If the student can explain the idea in class but not later, use a shorter review interval and fewer new terms. If the foundation is secure, increase the reasoning demand rather than adding decorative vocabulary.
A parent can keep the check brief: “What does the word mean here? Which quantity changes? What stays the same? What would make your answer different?” Accept a plain accurate explanation. Technical language should sharpen a real idea, not replace one.
Try these without looking at the list. Show a sentence of reasoning for each. The aim is to locate the next teaching step, not to attach a label to the student.
- Check A: A runner completes one lap and returns to the start. Is distance zero? Is displacement zero?
- Check B: A box moves horizontally at constant velocity. What can you conclude about its horizontal resultant force?
- Check C: A 2.5 kg object is in a field of 10 N/kg. Find its weight and name the unit.
- Check D: A wave has frequency 4 Hz and wavelength 0.75 m. Calculate its speed.
- Check E: A current of 0.40 A flows through a component with 6.0 V across it. Determine its resistance.
- Check F: Five stopwatch readings cluster closely, but timing starts 0.20 s late each time and stops at the correct instant. What distinction should the student discuss?
Answers: A: distance is the lap length and is not zero; displacement is zero because the final and initial positions coincide. B: the horizontal resultant force is zero because horizontal acceleration is zero. C: W = mg = 2.5 × 10 = 25 N. D: v = fλ = 4 × 0.75 = 3.0 m/s. E: R = V/I = 6.0 ÷ 0.40 = 15 Ω; the current is nonzero, so this division is defined. F: the readings may be repeatable while affected by a systematic timing error.
If A is difficult, revisit scalar and vector meanings. If C, D or E is difficult despite a correct equation, check substitution and units. If B or F is difficult, work on explaining conditions. Use the result to select practice; six questions cannot establish overall readiness for the subject.
CHAPTER 18 OF 20 · Find answers and sources
18. Questions students and parents often ask
Must all 100 terms be memorised immediately?
No. Learn the current chapter and its prerequisites first. Some groups may belong later in the school’s sequence. Knowing fewer terms accurately and using them in questions is a sounder next step than reciting a large list with no application.
Can Combined Science students use this guide?
They can use explanations that match their own course, but should check their actual syllabus and teacher’s scope. The shared word “Physics” does not make the standalone and combined courses interchangeable. Use the school’s registered subject code to decide what to study.
Does using the correct keyword guarantee a mark?
No. A word must appear in an accurate relationship that addresses the question. “Pressure” alone explains little. Identifying a larger normal force on the same area, or the same force on a smaller area, makes the reasoning assessable.
Should parents insist on textbook wording?
Precise definitions matter, but begin by checking the meaning. Ask the student to explain plainly, draw the idea and then refine the scientific wording. A fluent sentence copied from notes may hide confusion that a simple example reveals.
How do we know whether extra support is helping?
Look for independent changes across several tasks: the student selects the relevant quantity, supplies units, identifies conditions and repairs an explanation without being led through every sentence. Compare similar tasks after a delay. No single worksheet or short quiz can promise a future grade.
Use the Physics Topic Index to connect the words to wider subject topics, and the Secondary 3 G3 Physics EOY preparation guide when organising revision around school assessments. For work involving graphs and evidence, the research and data analysis vocabulary guide offers a complementary language route.
Choose one explanation to improve today. State the object or system, identify the changing quantity, name the relevant relationship and check the result. Vocabulary becomes valuable when it lets a student see the Physics more clearly and communicate that understanding with confidence.
- SEAB: 2027 G3 syllabuses for school candidates — subject names and codes.
- SEAB: 2027 G3 Physics K323 syllabus — course scope, assessment objectives, practical expectations and instruction glossary.
- SEAB: Secondary Education Certificate — introduction of SEC from 2027.
Sources checked on 16 November 2026. The numbered selection, explanations, practice questions and teaching suggestions are original eduKate learning material. Check the school’s current topic outline and the official document for the student’s examination year.
