Three learners review open books together at a classroom table, with stacks of textbooks, stationery and a whiteboard in the bright room.

Secondary 3 G3 Vocabulary | Top 100 Words for Mathematics Small Groups Tuition

Secondary 3 G3 Mathematics vocabulary helps students turn a question into a clear mathematical task. This guide teaches 100 useful words and terms for reading instructions, organising algebra, interpreting graphs, explaining geometry and checking answers. Each entry has a plain explanation and an example, followed by practice that can be used at home or in a three-student small-group tutorial.

Start with the language in your current school chapter and recent marked work. The list connects earlier foundations with upper-secondary Mathematics; some topics may come later in your school’s sequence. These are eduKate’s teaching selections, not an official SEAB top-100 list or a promise of complete examination coverage. Understanding a word means being able to use it in a solution, explain why it fits and recognise when a different word changes the task.

  • Who this helps: Secondary 3 students studying Mathematics at G3 and parents helping them understand schoolwork.
  • What you will learn: 100 numbered terms across algebra, instructions, quantities, graphs, geometry, measurement, statistics and probability.
  • How to begin: choose five unfamiliar terms from the current topic, explain each, then solve a short question using it.
  • How small groups can help: three students can alternate between solving, explaining and checking, with the tutor examining each person’s reasoning.
  • What to check: your school’s topic sequence, assessment scope and actual SEC examination year.
  • What counts as progress: more accurate reading, clearer working and independent use of the terms in unfamiliar questions.

CHAPTER 1 OF 18 · Understand the course

1. Understand the subject and examination context

Back to contents

The 2027 SEAB G3 syllabus index lists Mathematics as K310 and Additional Mathematics as the separate subject K341. This article supports Mathematics. Taking the additional subject requires a separate set of topics and practice; a vocabulary list should not blur those courses.

The 2027 G3 Mathematics syllabus covers number and algebra, geometry and measurement, and statistics and probability. It also assesses interpretation, reasoning and communication. That makes vocabulary useful beyond recalling definitions: students need to identify a relationship, choose suitable mathematics and explain their conclusions.

SEAB’s SEC information confirms that the Singapore–Cambridge Secondary Education Certificate begins in 2027 and records subjects at their respective levels. G3 here describes the subject level. A Secondary 3 school test is a school assessment, not the national SEC examination.

For an ordinary progression from Secondary 3 to Secondary 4, a student in Secondary 3 in 2026 would generally work towards the 2027 examination; a student entering Secondary 3 in 2027 would generally work towards 2028. These are progression examples, not confirmation of an individual registration. Ask the school which examination year applies. The linked subject specification is explicitly for 2027; use the specification for your own examination year when it becomes available.

Keep the school’s chapter plan beside this guide. If vectors or cumulative frequency have not yet been taught, mark them for later. A student does not need to learn every future definition before improving today’s algebra. Earlier words such as coefficient and ratio remain worth revisiting because they carry much of the meaning inside more difficult questions.

CHAPTER 2 OF 18 · Learn the 100 terms

2. Words 1–10: read the structure of algebra

Back to contents

These terms tell you what you are looking at before you decide what to do. Explain an expression aloud, pointing to its parts. The aim is to see structure rather than treat every letter as an instruction to find a number.

  1. Coefficient. The numerical multiplier of a variable term. In −7x, the coefficient of x is −7, including the negative sign. In x, the coefficient is 1 even though it is not written.
  2. Constant. A quantity held fixed in the situation being considered. In 4x + 9, the constant term is 9. Its value does not change when you substitute different values for x.
  3. Variable. A symbol representing a quantity that can take different values. If y = 3x, changing x changes y. Always connect the symbol to the quantity it represents in a word problem.
  4. Term. A part of an algebraic sum, together with its sign. The expression 5x² − 3x + 8 has three terms. The middle term is −3x, not merely 3x.
  5. Expression. A mathematical combination representing a value, without asserting an equality. The expression 2x + 5 can be evaluated when x is known. By itself, it does not ask you to solve for x.
  6. Equation. A statement that two expressions are equal. The equation 2x + 5 = 17 is true when x = 6. Solving means finding values that make the statement true.
  7. Identity. An equality true for every allowed value of its variables. For example, 3(x + 2) ≡ 3x + 6. This differs from an equation that is true only for particular values.
  8. Factor. A quantity multiplied by another to form a product. In 6x = 2 × 3 × x, each displayed part is a factor. Factors are multiplied; terms are added or subtracted.
  9. Multiple. A number obtained by multiplying a given number by an integer. The positive multiples of 6 begin 6, 12 and 18. A common multiple belongs to more than one such list.
  10. Index. The exponent attached to a base. In 5³, the index is 3 and the value is 125. A negative index means a reciprocal: 5⁻¹ = 1/5, not −5.

CHAPTER 3 OF 18 · Learn the 100 terms

3. Words 11–20: respond to the instruction

Back to contents

A command word sets the job. Underline the instruction, identify the mathematical object and decide what your finished answer should look like. An accurate calculation can still leave a task unfinished if the question asked for an explanation.

  1. Calculate. Work out a numerical result from the information given. Calculate the cost of seven items at $3.20 each: 7 × 3.20 = $22.40. Include the relevant unit or currency.
  2. Evaluate. Find the value of an expression under stated conditions. To evaluate 2a² when a = −3, write 2(−3)² = 18. Brackets protect the meaning of the negative substitution.
  3. Simplify. Rewrite an expression in a clearer equivalent form. For example, 4x + 3x − 2 becomes 7x − 2. Simplifying does not mean inventing an equation or assigning x a value.
  4. Expand. Remove brackets by multiplying correctly. Expanding −2(3x − 4) gives −6x + 8. The multiplier applies to every term inside the bracket, including the negative term.
  5. Factorise. Rewrite an expression as a product. For example, 9x + 15 = 3(3x + 5). Expand your factors afterwards to check that they reproduce the original expression exactly.
  6. Solve. Find all values satisfying an equation or inequality in its stated domain. Solving x² = 16 gives x = 4 or x = −4. Check whether a context excludes either value.
  7. Show that. Demonstrate a supplied result using valid working. If asked to show that a length is 13 cm, derive it from the given information; repeating the supplied length is insufficient.
  8. Justify. Give a mathematical reason supporting a claim. To justify that a triangle is right-angled, you might show that its squared side lengths satisfy Pythagoras’ theorem with the longest side identified.
  9. Estimate. Find a sensible approximate result, often using convenient rounded values. Estimating 49.8 × 19.7 as 50 × 20 gives about 1000. Use this to judge whether a calculator answer is plausible.
  10. Hence. Use a preceding result to make the next deduction. Read the earlier part again and identify the connection. The phrase “hence, or otherwise” permits a different valid method as well.

CHAPTER 4 OF 18 · Learn the 100 terms

4. Words 21–30: understand boundaries and accuracy

Back to contents

Words about limits decide whether an endpoint is included. Accuracy words decide how a value is reported. Before calculating, translate the condition into symbols and note the requested precision beside the answer space.

  1. Inequality. A comparison using symbols such as <, >, ≤ or ≥. The inequality x < 5 includes values below 5 but excludes 5 itself. Its solutions may form a whole interval.
  2. At least. Equal to or greater than a stated amount. “At least eight participants” means n ≥ 8. Eight qualifies; seven does not. Keep the equality when translating the phrase.
  3. At most. Equal to or less than a stated amount. “At most $50” means a cost no greater than $50. A cost of exactly $50 remains within the limit.
  4. Greater than. Strictly larger, excluding equality. If x is greater than 3, write x > 3. The value 3.1 qualifies, but 3 does not; integer restrictions would change the examples available.
  5. Less than. Strictly smaller, excluding equality. Read word order carefully: “three less than x” is x − 3. It is not the inequality 3 < x and not generally 3 − x.
  6. Consecutive integers. Whole-number steps with no gaps, including negative integers where allowed. Three consecutive integers can be written n, n + 1 and n + 2; consecutive even integers require steps of two.
  7. Significant figures. Digits counted from the first non-zero digit to express numerical precision. To three significant figures, 0.004786 becomes 0.00479. Leading zeros locate the decimal position; they are not counted.
  8. Decimal places. The number of positions after the decimal point. To two decimal places, 6.275 becomes 6.28. This is a different instruction from two significant figures, which would give 6.3.
  9. Exact value. A value given without rounding. For a circle of radius 3 cm, the exact circumference is 6π cm. A finite decimal approximation represents it only to a chosen accuracy.
  10. Approximation. A value close to another value for a stated purpose. Write √2 ≈ 1.414 rather than using an exact equality. Retaining extra digits during working can prevent premature rounding errors.

CHAPTER 5 OF 18 · Learn the 100 terms

5. Words 31–40: compare quantities and changes

Back to contents

Quantities must be compared on the right basis. Identify what is held fixed, what is changing and which amount serves as the reference. A correct percentage calculation begins with that relationship.

  1. Ratio. A comparison of quantities in a specified order. A red-to-blue ratio of 2:3 means two red parts for every three blue parts. Red makes up 2/5 of the combined total.
  2. Proportion. An equal relationship between ratios. For example, 2/3 = 8/12. Check the corresponding quantities before cross-multiplying; an equation built from mismatched quantities will preserve the wrong relationship.
  3. Direct proportion. A relationship y = kx for a fixed constant k. If cost is directly proportional to mass, doubling the mass doubles the cost. An extra fixed charge breaks this simple model.
  4. Inverse proportion. A relationship y = k/x, with x non-zero. For a fixed journey distance, travel time is inversely proportional to constant speed. Doubling that speed halves the time in this model.
  5. Rate. A comparison involving quantities, often with different units. A printer producing 24 pages in three minutes has an average rate of eight pages per minute. State which quantity comes first.
  6. Average speed. Total distance divided by total elapsed time. Travelling 90 km in two hours gives 45 km/h. Averaging two speed readings is not generally equivalent unless the relevant time conditions fit.
  7. Percentage increase. The increase divided by the original amount, multiplied by 100%. A change from 80 to 100 is a 25% increase. The original 80, not the new 100, is the denominator.
  8. Reverse percentage. Finding an original amount from a changed amount and percentage. If a price after a 20% discount is $64, the original is 64 ÷ 0.8 = $80.
  9. Simple interest. Interest calculated on the original principal only. In a hypothetical model, $500 at 4% a year earns $20 each year. State the period and assumptions before applying a formula.
  10. Compound interest. Interest calculated on an amount that includes earlier interest. In a hypothetical annual model, $500 at 4% becomes 500 × 1.04² = $540.80 after two years, with no other transactions.

CHAPTER 6 OF 18 · Learn the 100 terms

6. Words 41–50: connect equations and graphs

Back to contents

A graph displays a relationship, not merely a shape to copy. Connect a point to an ordered pair, connect an intersection to simultaneous conditions, and check what each axis measures before describing a gradient.

  1. Quadratic. A polynomial expression or equation whose highest power of its variable is two. For example, x² − 5x + 6 is quadratic. Its leading coefficient must be non-zero.
  2. Root. A value that makes an expression equal to zero. The roots of x² − 5x + 6 are 2 and 3. They correspond to horizontal-axis intersections of its graph.
  3. Simultaneous equations. Equations whose conditions must hold together. The pair x + y = 7 and x − y = 1 has the common solution x = 4, y = 3.
  4. Coordinate. A number locating a point relative to an axis; an ordered pair locates a point in a plane. In (−2, 5), the horizontal coordinate is −2 and the vertical coordinate is 5.
  5. Gradient. Change in the vertical coordinate divided by change in the horizontal coordinate. From (1, 2) to (4, 8), the gradient is 6/3 = 2. A vertical line has no finite gradient.
  6. Intercept. Where a graph meets an axis, or the relevant coordinate there. For y = 2x + 6, the y-intercept is 6 at (0, 6), and the x-intercept is −3.
  7. Turning point. A point where a curve changes from decreasing to increasing or the reverse. The quadratic y = (x − 2)² + 1 has its minimum turning point at (2, 1).
  8. Function. A rule assigning exactly one output to each allowed input. For f(x) = 2x + 1, f(3) = 7. The notation names a value; it does not mean f multiplied by x.
  9. Reciprocal. The multiplicative inverse of a non-zero number or expression. The reciprocal of 4 is 1/4; the reciprocal of x is 1/x for x ≠ 0. Their product is one.
  10. Sequence. An ordered list following a rule or description. The sequence 5, 8, 11, 14 has nth term 3n + 2 when counting starts at n = 1.

CHAPTER 7 OF 18 · Learn the 100 terms

7. Words 51–60: describe geometry precisely

Back to contents

Use geometry words with a stated pair of lines, figures or measurements. A diagram can suggest a relationship, but the given information and valid reasoning must establish it. Record matching vertices carefully.

  1. Parallel. Coplanar straight lines that do not meet, however far extended. Their direction stays the same. A drawing that looks parallel is not sufficient evidence when no such condition has been established.
  2. Perpendicular. Lines meeting at a right angle. A vertical line and a horizontal line are perpendicular. In coordinate work, state any conditions before using a shortcut involving gradients.
  3. Bisector. Something that divides an angle or segment into two equal parts. An angle bisector of an 80° angle creates two 40° angles. A perpendicular bisector also meets a segment at 90°.
  4. Congruent. Figures having the same shape and size, even if differently positioned. Corresponding lengths and angles match. Explain the appropriate congruence conditions instead of relying on how similar two sketches appear.
  5. Similar. Figures with equal corresponding angles and proportional corresponding lengths. Two similar triangles can have different sizes. Identify the common length scale factor before comparing their areas.
  6. Corresponding side. A side matching another side under a stated relationship between figures. If triangle ABC corresponds to triangle PQR, AB matches PQ. Preserve that order when forming ratios.
  7. Scale factor. The multiplier connecting corresponding lengths. An enlargement with length scale factor 3 has area scale factor 9. Similar three-dimensional solids would have volume scale factor 27.
  8. Bearing. An angle measured clockwise from north, conventionally written with three digits. Due east has bearing 090°. Draw the north line at the starting point before measuring the direction.
  9. Angle of elevation. The angle upward from the observer’s horizontal line to a line of sight. Looking towards a roof creates this angle at the observer, not automatically at the building.
  10. Angle of depression. The angle downward from the observer’s horizontal line to a line of sight. Draw the horizontal reference explicitly; an angle measured from a vertical line is different.

CHAPTER 8 OF 18 · Learn the 100 terms

8. Words 61–70: work with circles and triangles

Back to contents

Write the name beside the feature it describes. In a circle, distinguish a straight segment from a curved boundary. In a right-angled triangle, identify the reference angle before choosing the opposite or adjacent side.

  1. Radius. A segment from a circle’s centre to its circumference, or its length. All radii of the same circle have equal length. A radius of 4 cm gives a diameter of 8 cm.
  2. Diameter. A chord passing through a circle’s centre. Its length is twice the radius. If a formula requires radius and the question gives diameter, halve the value before substituting.
  3. Chord. A straight segment joining two points on a circle. It need not pass through the centre. A diameter is a special chord; an arc is curved and is not a chord.
  4. Tangent. A tangent line touches a circle at one point and is perpendicular to the radius there. In right-triangle trigonometry, tan θ instead denotes opposite divided by adjacent. Context distinguishes these meanings.
  5. Arc. A portion of a circle’s circumference. An arc’s length follows the curved boundary, not the straight chord joining its ends. Specify which arc is meant when two are possible.
  6. Sector. A region bounded by two radii and their connecting arc. A 90° sector occupies one quarter of its circle. Distinguish its area from the length of its curved edge.
  7. Radian. An angle measure defined by arc length divided by radius. An arc equal in length to its radius subtends one radian. π radians equals 180°, so calculator mode matters.
  8. Hypotenuse. The side opposite the right angle in a right-angled triangle. It is the longest side. Identify the right angle first; the side drawn horizontally is not automatically the hypotenuse.
  9. Sine. For an acute angle in a right-angled triangle, opposite side divided by hypotenuse. If those lengths are 3 and 5, sin θ = 3/5. The ratio is not itself the angle.
  10. Cosine. For an acute angle in a right-angled triangle, adjacent side divided by hypotenuse. With adjacent length 4 and hypotenuse 5, cos θ = 4/5. Identify the angle before naming its adjacent side.

CHAPTER 9 OF 18 · Learn the 100 terms

9. Words 71–80: measure and represent quantities

Back to contents

Units tell part of the story. Length, area and volume require different conversions. For matrices and vectors, keep track of the meaning and order of entries; the arrangement is part of the information.

  1. Perimeter. The total distance around a plane figure’s boundary. A rectangle of length 8 cm and width 3 cm has perimeter 22 cm. Include every exposed boundary in a composite shape.
  2. Area. The size of a two-dimensional region, measured in square units. The same 8 cm by 3 cm rectangle has area 24 cm². Area answers cannot be labelled simply centimetres.
  3. Volume. The space occupied by a three-dimensional solid, measured in cubic units. A cuboid measuring 2 cm by 3 cm by 5 cm has volume 30 cm³.
  4. Surface area. The total area of the relevant outer surfaces of a solid. A closed cube has six square faces. An open container may omit a face, so read the context.
  5. Prism. A solid with matching parallel polygonal end faces and a constant cross-section between them. For a right prism, volume equals cross-sectional area multiplied by the perpendicular length between its ends.
  6. Cross-section. The shape exposed by slicing a solid along a specified plane. A cut parallel to a cylinder’s circular ends produces a circle. Different cutting directions can produce different shapes.
  7. Matrix. A rectangular arrangement of entries in rows and columns. A matrix may record prices or quantities. Label what each row and column represents before interpreting or multiplying its entries.
  8. Order. In matrix work, the number of rows followed by the number of columns. A matrix with two rows and three columns has order 2 × 3, not 3 × 2.
  9. Vector. A quantity represented by magnitude and direction. A displacement three units right and four units up differs from one three units left and four units down, even though their magnitudes match.
  10. Magnitude. The size or length of a vector. A two-dimensional vector with perpendicular components 3 and 4 has magnitude √(3² + 4²) = 5. Magnitude does not specify direction.

CHAPTER 10 OF 18 · Learn the 100 terms

10. Words 81–90: interpret data without changing its meaning

Back to contents

State what the data measures and which group it describes. A statistic condenses information, so ask what that summary preserves and what it leaves out. Two groups can share an average while having different spreads.

  1. Frequency. The number of occurrences of a value or category. If six students recorded a journey time of 20 minutes, the frequency is six. It is not a time of six minutes.
  2. Mean. The sum of values divided by the number of values. For 2, 3 and 10, the mean is 5. In a frequency table, account for repeated values before dividing.
  3. Median. The middle value after ordering the data, or the mean of the middle pair for an even count. For 2, 4, 7 and 9, the median is 5.5.
  4. Mode. The value occurring most frequently. In 1, 2, 2, 5 and 5, both 2 and 5 are modes. Do not assume every data set has exactly one.
  5. Range. In statistics, the largest value minus the smallest. For 4, 7 and 13, the range is 9. The same word can describe function outputs in another mathematical context.
  6. Quartile. A boundary separating ordered data into quarters. The lower and upper quartiles are often written Q1 and Q3. Follow the stated method or your school’s convention for small data sets.
  7. Interquartile range. Q3 − Q1, a measure of the spread of the middle half of the data. If Q1 = 12 and Q3 = 19, the interquartile range is 7.
  8. Standard deviation. A measure of spread around the mean. A smaller standard deviation indicates less spread around that mean. When comparing groups, consider both centre and spread rather than declaring the smaller value “better”.
  9. Cumulative frequency. A running total of frequencies up to a stated boundary. If successive class frequencies are 3, 5 and 2, their cumulative frequencies are 3, 8 and 10.
  10. Histogram. A diagram representing grouped numerical data with adjoining bars. Read the class intervals and vertical-axis label carefully. For equal class widths with frequency shown, taller bars represent larger frequencies.

CHAPTER 11 OF 18 · Learn the 100 terms

11. Words 91–100: describe sets and chance

Back to contents

Probability language needs precise conditions. Decide what outcomes are possible, whether they are equally likely and whether an earlier outcome changes the next selection. Words such as “or” and “and” require careful interpretation.

  1. Set. A well-defined collection of distinct elements. The set {2, 4, 6} contains three elements. Repeating an element in a written list does not create another distinct member of the set.
  2. Union. The set of elements in either of two sets, including elements in both. If A = {1, 2} and B = {2, 3}, then A ∪ B = {1, 2, 3}.
  3. Intersection. The set of elements shared by two sets. For A = {1, 2} and B = {2, 3}, A ∩ B = {2}. “Both” points towards the shared region.
  4. Complement. Everything in the stated universal set that is outside a particular set. If the universal set is {1, 2, 3, 4} and A = {1, 4}, its complement is {2, 3}.
  5. Outcome. A possible result of a chance process. Getting a 4 is one outcome of rolling a standard six-sided die. State the experiment clearly before listing its outcomes.
  6. Sample space. The complete set of possible outcomes. For one standard die roll, it is {1, 2, 3, 4, 5, 6}. Completeness matters: missing outcomes can distort a probability calculation.
  7. Event. A specified collection of outcomes. Rolling an even number is the event {2, 4, 6}. One event may therefore contain several individual outcomes from the sample space.
  8. Probability. A measure of chance between zero and one. For equally likely outcomes, divide favourable outcomes by total outcomes. A fair die gives probability 3/6 = 1/2 of an even number.
  9. Independent. Events for which knowing that one occurred does not change the probability of the other. Separate fair die rolls are modelled as independent. Drawing objects without replacement generally changes later probabilities.
  10. Mutually exclusive. Events that cannot occur together in the same trial. One die roll cannot be both 2 and 5. This differs from independence; the two phrases are not interchangeable.

CHAPTER 12 OF 18 · Practise and check

12. Find the language error before repeating the calculation

Back to contents

When an answer is wrong, locate the first decision that went wrong. A student who translates “at most” incorrectly needs a different repair from a student who translates it correctly and then makes an arithmetic error. Write the mistaken phrase, the intended meaning and one contrasting example beside the correction.

Expression and equation

Consider 4x + 12. A student who writes x = −3 has silently turned the expression into the equation 4x + 12 = 0. If the instruction was to factorise, the required response is 4(x + 3). Ask, “Where did the equals zero come from?” This question finds the change in meaning without labelling the student careless.

Term and factor

In (6x + 9)/3, division applies to both terms in the numerator, giving 2x + 3. In (6x + 9)/(3x), cancelling x from only the first term is invalid. Factorise the numerator first: 3(2x + 3)/(3x) = (2x + 3)/x, for x ≠ 0. A cancellation works on common multiplicative factors of the whole numerator and denominator.

Percentage increase and reverse percentage

Suppose a hypothetical item rises from $80 to $100. The increase is 25% of $80. Returning from $100 to $80 is a 20% decrease because the reference amount is now $100. The dollar difference stays $20 while the percentage changes. Have the student say the denominator aloud before using the calculator.

Similar and congruent

If corresponding lengths are multiplied by two, the figures can be similar without being congruent. Their corresponding areas scale by four. Drawing a 2 cm by 3 cm rectangle beside a 4 cm by 6 cm rectangle makes the distinction concrete: the shape is preserved, the lengths double, and the area changes from 6 cm² to 24 cm².

Independent and mutually exclusive

Use separate experiments to test these words. On one fair die roll, the events “2” and “5” cannot both occur. After learning that the result is 2, the probability of 5 is zero. For two independent fair rolls, learning that the first is 2 does not alter the second roll’s probability of 5. The difference lies in the conditions, not in how unrelated the words sound.

CHAPTER 13 OF 18 · Practise and check

13. Use the words in four complete worked examples

Back to contents

Read each question once for the situation and again for the command and conditions. Before calculating, write a short plan. Afterwards, check both the mathematics and whether the answer actually satisfies the wording.

Example A: a limit, an inequality and an integer answer

Question: A school club budgets at most $90 for materials. Delivery costs $12 and each identical kit costs $7. What is the greatest number of kits it can buy?

Let n be the number of kits. “At most” gives 12 + 7n ≤ 90. Subtracting 12 gives 7n ≤ 78, so n ≤ 78/7 = 11.142857… . Kits are counted in non-negative integers, making the greatest possible value n = 11.

Check the boundary. Eleven kits cost $89 including delivery, while twelve cost $96. Reporting 11.1 kits would overlook the meaning of the variable. Rounding to the nearest integer happens to give 11 here, but the reliable reasoning is to select the greatest integer that satisfies the budget.

Example B: factorise, solve and reject an unsuitable root

Question: A rectangle has width x cm and length (x + 3) cm. Its area is 40 cm². Form an equation, factorise it and find the dimensions.

Area gives x(x + 3) = 40, so x² + 3x − 40 = 0. Factorising produces (x + 8)(x − 5) = 0. The roots are −8 and 5. Because x represents a positive length, reject −8. The width is 5 cm and the length is 8 cm.

The equation has two algebraic roots, but the situation admits one width. Write that explanation instead of silently discarding a value. The check 5 × 8 = 40 confirms the area, while 8 − 5 = 3 confirms the stated difference in dimensions.

Example C: a gradient with meaning and units

Question: A tank’s recorded water volume rises uniformly from 18 litres at 2 minutes to 42 litres at 8 minutes. Find the average rate of increase between these observations.

On a volume–time graph, the gradient is (42 − 18)/(8 − 2) = 24/6 = 4 litres per minute. Explain the result as a gain of four litres for every minute over that interval. The denominator is elapsed time between observations, not the final clock reading of eight minutes.

If the relationship is modelled by a straight line V = 4t + c, substituting (t, V) = (2, 18) gives c = 10. However, an estimate of volume at t = 0 would rely on extending the same model backwards. Distinguish a recorded value from a value inferred using a model.

Example D: probability with changing conditions

Question: A bag contains three red counters and two blue counters. Two counters are selected randomly without replacement. Find the probability that both are red.

The probability of a red first counter is 3/5. After that red counter is removed, two red counters remain among four counters, so the conditional chance of a second red counter is 2/4. Multiplying along that sequence gives (3/5)(2/4) = 3/10.

The phrase “without replacement” changes the second fraction. If the first counter were replaced and the bag mixed again, the probability of two reds would instead be (3/5)(3/5) = 9/25. Reading the condition correctly matters before any multiplication begins.

CHAPTER 14 OF 18 · Practise and check

14. Try a short vocabulary diagnostic

Back to contents

Attempt these prompts without looking back at the definitions. Give a brief reason where asked. This is an informal teaching check, not a school grade or a test of whether a student belongs at a particular subject level.

  • A. Identify the coefficient of x in 6 − 4x.
  • B. Simplify 3(a − 2) + 5a. Explain why this does not determine a.
  • C. Translate “the total is at least 18” into an inequality using T.
  • D. Round 0.006482 to three significant figures and then to three decimal places.
  • E. A quantity becomes 72 after a 20% increase. Find its original value.
  • F. Find the gradient through (−1, 4) and (3, −4).
  • G. Similar figures have length scale factor 4. State their area scale factor.
  • H. Find the mean and median of 2, 3, 4 and 15.
  • I. If A = {1, 3, 5} and B = {3, 4, 5}, find A ∩ B.
  • J. Explain why drawing two counters without replacement should not automatically be treated as independent selections.

Answers and what they reveal

A: −4. Missing the sign suggests the coefficient has been separated from its term. B: 8a − 6; no equation or specified value of the expression has been supplied. C: T ≥ 18, including equality. D: 0.00648 and 0.006 respectively. If your two rounded values are identical to each other, revisit the distinction between significant figures and decimal places.

E: 72 ÷ 1.2 = 60. F: (−4 − 4)/(3 − (−1)) = −8/4 = −2. G: 16. H: Mean 6; median 3.5. I: {3, 5}. J: Removing a counter changes the composition of what remains, so information about the first selection can change probabilities for the second.

Sort the responses into three practical groups: the word was unclear, the relationship was clear but the working failed, or the answer was correct and could be explained. These groups suggest different next steps. A single total score would hide that useful distinction.

CHAPTER 15 OF 18 · Plan useful support

15. Make a three-student tutorial useful

Back to contents

A small group gives a tutor opportunities to hear each student’s thinking. Those opportunities need deliberate organisation. One confident student answering every question can conceal two classmates’ uncertainty, even in a group of three. Begin with individual written attempts before comparing methods.

For an illustrative 90-minute lesson, allocate ten minutes to retrieval from previous topics, fifteen to a focused distinction such as factor versus term, twenty to guided problems, fifteen to rotating explanation roles, twenty to independent mixed practice and ten to corrections and the next practice target. This is a teaching example, not a published class timetable.

During the explanation stage, one student solves, another explains the meaning of the command and conditions, and the third checks the reasoning against the original question. Rotate all three roles. The tutor should still inspect each student’s individual working; peer agreement alone does not establish mathematical correctness.

Use questions that expose decisions. “Which phrase made you choose an inequality?” is more revealing than “Do you understand?” “Why did you reject this root?” tests the link between algebra and context. “What would change if the counter were replaced?” checks whether the student has understood a probability condition.

Match the teaching route to the current evidence. A student rebuilding confidence may need five foundational words and two successful applications. A student maintaining steady performance may need mixed questions where the chapter is not announced. A student ready to extend can compare two valid methods, construct a counterexample or explain a model’s limitation.

Families comparing small-group support can ask to see how the tutor identifies errors, checks independent work and adjusts to the school’s sequence. Confirm actual subject provision and class arrangements directly. Group size alone cannot establish teaching quality, and no responsible vocabulary programme can promise a particular grade.

CHAPTER 16 OF 18 · Plan useful support

16. Build a realistic vocabulary practice routine

Back to contents

Use the list as a working reference rather than a spelling test. Choose a small set of terms from the current school chapter. For each, write a plain meaning, a correct example and a nearby confusion. For “at most”, that confusion might be forgetting equality; for “factorise”, it might be solving an equation that was never given.

A possible ten-week first pass uses one group of ten terms each week, but the school’s teaching order should take priority. Reorder the groups, spend longer on difficult ideas and defer untaught topics. Completing the list in ten weeks is an organisational option, not a learning deadline.

One week’s practical sequence

On the first day, learn five terms through a worked question. On the second, close the guide and explain them from memory, then check and correct. On the third, add up to five more if the earlier meanings are usable. On the fourth, solve mixed questions containing both old and new language. At the weekend, choose two errors to explain again without looking at the correction.

Keep sessions short enough to finish thoughtfully. Ten to fifteen minutes can be a useful starting arrangement, adjusted to the student’s workload and the difficulty of the task. A difficult algebra correction may deserve the entire session. Finishing fewer questions with an understood correction is a legitimate outcome.

After a week, return to an unfamiliar example rather than repeat the same numbers. A student who learned reverse percentage through a discount can next attempt a percentage increase. A student who calculated a gradient from a diagram can next find it from coordinates. This checks whether the word can guide a new decision.

What parents can say and observe

Ask the student to explain one decision, not to perform the whole chapter aloud. Useful prompts include “What does the question want at the end?”, “Which amount is the original?” and “How could you check that?” If you are unsure of the mathematics, use the teacher’s marked explanation or this guide’s worked answer as a reference.

When the explanation breaks down, identify a small repair. If the student cannot distinguish a radius from a diameter, sketch a circle. If an inequality is unclear, test a value at its boundary. If the arithmetic fails after a correct translation, preserve the correct setup and work on the calculation separately.

Look for specific changes over several pieces of work: correctly including endpoints, retaining negative coefficients, labelling axes and units, rejecting impossible lengths with reasons, or spotting a changed probability condition. These observations give the teacher or tutor more actionable information than “needs to be more careful”.

CHAPTER 17 OF 18 · Find answers and sources

17. Questions students and parents ask

Back to contents

Must all 100 words be memorised before the next test?

No. Begin with the school’s stated test scope and the words already causing mistakes. Some entries support later upper-secondary topics. Learn each selected term well enough to use it; a rushed recitation of the whole list is not a dependable measure of readiness.

Are these the official 100 SEAB words?

No. The list is an original eduKate selection for teaching. Official syllabuses identify subject content and assessment requirements; this guide organises useful language into a manageable learning resource. It does not replace the complete syllabus or the school’s teaching materials.

Why include familiar lower-secondary words?

Older vocabulary remains inside newer mathematics. A quadratic expression still contains terms, coefficients and factors. An unfamiliar problem can become more manageable when these components are recognised correctly. Revisit a familiar word when an error shows that its use is unstable.

Can my child explain a term in another language first?

A familiar language can help establish the idea. Then connect it to the English term and mathematical notation used in school. For example, explain the idea of an included maximum, write “at most”, and match it to ≤. Finish with an English question that the student can interpret independently.

What if the definitions are known but marks remain inconsistent?

Inspect the working. The difficulty may involve algebra, arithmetic, choosing a method, handling time or applying a concept in an unfamiliar setting. Vocabulary practice should be connected to these tasks. Bring recent marked questions to the teacher or tutor and identify the earliest recurring error.

Does this replace an Additional Mathematics vocabulary guide?

No. Additional Mathematics has its own subject scope. A student taking both courses can share foundational language between them while keeping subject-specific topics and expectations clear. Use a dedicated Additional Mathematics vocabulary guide for that second course.

CHAPTER 18 OF 18 · Find answers and sources

18. Continue with the next useful resource

Back to contents

For planning school assessment preparation, read Secondary 3 G3 Mathematics EOY preparation. For a wider discussion of academic language, continue with Making Sense of Vocabulary in secondary school. The Secondary 3 research and data analysis vocabulary guide provides a complementary route for discussing evidence and numerical information.

For official requirements, use the SEAB SEC overview, the 2027 G3 school-candidate syllabus index and the 2027 Mathematics K310 specification. Source context checked on 16 November 2026. The examples and teaching sequence above are original practice suggestions.

Choose one question from today’s homework and identify its command, quantities, conditions and required answer. Explain those four parts before calculating. That small routine turns vocabulary into something a student can use immediately, and gives the next lesson a clear starting point.

Explore the connected learning guides

Choose the question that brought you here. Open one useful guide, try a small task, and stop when you have what you need.

Take one question further

The same learning habit can travel across subjects, while each subject keeps its own methods. These routes help you notice a difficulty, understand one part of it, and return to something you can do.

A word is familiar, but using it is difficult.

Move from recognising a word to retrieving it in a new context. Understand vocabulary plateaus.

Try it without the guide: Choose one word you already know. Close the guide and use it in a new sentence. Explain why it fits; try another context tomorrow.

A piece of writing has ideas, but the reader loses the thread.

Make the order of events and the links between sentences clear. Explore composition writing.

Try it without the guide: Choose one short paragraph. Read the relevant explanation, close it, and revise the paragraph. Ask someone to tell you what happened and why.

The Mathematics seems familiar, but marks still disappear.

Find the first point where the working stops being reliable. Find Secondary 4 A-Math mark leakage.

Try it without the guide: For a Secondary 4 A-Math question you have attempted, locate the first uncertain line. Repair that step, then try a comparable question without the worked answer.

A Science fact is remembered, but the explanation is incomplete.

Connect the evidence to a scientific idea and the resulting change. Follow the Primary Science learning route.

Try it without the guide: Choose a familiar Primary Science example. Explain the evidence, the idea and the result without notes. Then change one condition and explain your prediction.

Two accounts of the world seem to disagree.

Check the question, source, date and evidence before combining claims. Explore the World Knowledge research library.

Try it without the guide: Take one claim. Find the source best placed to support it, note its date, and state what remains uncertain. Return to your original question.

There is plenty of help, but independence is hard to see.

Check what the learner can understand and do after support is removed. Understand how education works.

Try it without the guide: Choose one small task the child has practised. Agree on a calm, brief attempt without prompts. Use what happens to choose one next step, then stop.

For the structure behind these connections, read the eduKateSingapore runtime manifest and the eduKate ecosystem boot contract. The reader map describes public navigation; those manifests preserve the wider ownership and return rules.