Secondary 2 G3 Mathematics vocabulary helps a student understand the question before choosing a method. This guide brings together 100 useful words and short mathematical terms for reading instructions, handling algebra, interpreting graphs, describing shapes and explaining data. Each entry has a plain explanation and an example, so that a student can connect language with actual working. Start with the terms in the current school topic, then return to earlier foundations when an unfamiliar word interrupts a solution.
For parents, the useful check is whether your child can explain a term, recognise an example and use it independently in a question. Reciting a definition is only the beginning. In a carefully planned three-pupil tutorial, students can compare explanations, correct misleading statements and practise choosing methods for themselves. This is eduKate’s teaching selection, not an official MOE or SEAB compulsory vocabulary list, a ranking of examination frequency or a prediction of a school paper. It supports the student’s school programme and should be used alongside the teacher’s instructions.
- Who this is for: Secondary 2 students studying Mathematics at G3, and parents helping them read questions more accurately.
- What is included: exactly 100 words and short terms, grouped into ten practical sets with definitions and examples.
- What to study first: the vocabulary needed for the current chapter, together with any earlier language that is still uncertain.
- How to practise: explain the term, give an example, identify a misleading example and solve a short question without prompts.
- How to check progress: look for clearer interpretation, valid working and independent corrections, rather than counting copied definitions.
- Assessment context: follow your school’s Secondary 2 assessment requirements; the SEC is a later national examination.
- Support in this guide: worked translations, a short diagnostic with answers, a study routine and a suggested small-group lesson.
SECONDARY 2 · G3 MATHEMATICS
Find your next learning step
Start with the part that helps with today’s schoolwork, and return to the word bank when a meaning is uncertain.
The MOE G3 and G2 Mathematics syllabuses set out the G3 Secondary Two content in Section 3. It includes algebraic manipulation, equations and inequalities, proportion, quadratic graphs, similarity, right-triangle mathematics, mensuration, statistics and probability. The list below also revisits earlier number and graph language needed to understand those topics. Match revision to the sequence your school is teaching.
G3 describes the level at which Mathematics is taken. A student may take other subjects at different levels. SEAB’s SEC information explains the national certificate and its subject levels from 2027; it does not supply a universal Secondary 2 school paper. Schools publish their own assessment information: for example, Meridian Secondary’s assessment page provides separate lower-secondary schedules and formats. Your own school’s current notice is the relevant reference for what will be assessed.
Read each table as a working tool. Cover the explanation and try to reconstruct it using a different example. When a word is familiar but the example is difficult, practise the underlying mathematics. When the calculation is easy but the instruction is confusing, focus on the language. Those two difficulties need different kinds of help.
The instruction determines the finished answer. An expression, a numerical value and a solution are different outcomes, even when the question uses similar symbols. Read the command before beginning a calculation.
| Term | Meaning and use |
|---|---|
| 1. Evaluate | Find the numerical value of an expression using the given information. To evaluate 3x + 2 when x = 4, calculate 14. The task ends with a value, rather than a new formula. |
| 2. Simplify | Rewrite an expression in an equivalent, more manageable form. For example, 3x + 2x becomes 5x. There is no equation to solve here, so x does not suddenly acquire a particular value. |
| 3. Expand | Multiply out brackets, applying multiplication to every relevant term. Expanding 2(x + 3) gives 2x + 6. Writing 2x + 3 would leave the second term without the required multiplication. |
| 4. Factorise | Rewrite an expression as a product of factors. For example, x² + 5x + 6 becomes (x + 2)(x + 3). Expanding the product again is a useful way to check the result. |
| 5. Solve | Find all values that make the given equation or inequality true, within any stated restrictions. Solving 2x + 3 = 11 gives x = 4. Substituting 4 checks that both sides equal 11. |
| 6. Substitute | Replace a symbol with its given value or an equal expression. If x = −3, then x² means (−3)² = 9. Brackets preserve the negative value when it is being squared. |
| 7. Express | Write a quantity in the requested form. Expressing 0.75 as a fraction gives 3/4; expressing a cost in terms of n means producing an expression containing n. Check the requested form before stopping. |
| 8. Hence | Use a result or reasoning established earlier to reach the next conclusion. If the previous part gives x = 5, a question asking hence for 2x + 1 invites you to use that result. |
| 9. Show | Provide mathematical steps that establish the stated result. If asked to show an area is 24 cm², writing only 24 cm² repeats the claim. The calculation or reasoning must explain how it follows. |
| 10. Justify | Give a mathematical reason supporting an answer or decision. To justify that a triangle is right-angled, compare the square of its longest side with the sum of the squares of the other sides. |
These earlier foundations remain useful when letters replace numbers. A student who can explain the operation in a short sentence can check whether an algebraic expression represents the intended relationship.
| Term | Meaning and use |
|---|---|
| 11. Sum | The result of addition. The sum of x and 7 is x + 7. If the wording says twice their sum, both quantities belong inside the brackets: 2(x + 7). |
| 12. Difference | The result of subtraction, with order determined by the context. Five less than x is x − 5. Subtracting x from five gives 5 − x, which usually has a different value. |
| 13. Product | The result of multiplication. The product of 4 and x + 2 is 4(x + 2). The brackets show that the complete expression x + 2 is multiplied by four. |
| 14. Quotient | The result of dividing one quantity by another nonzero quantity. The quotient of x and 5 is x/5. Reversing the order gives 5/x and also requires the restriction x ≠ 0. |
| 15. Reciprocal | The number that multiplies a given nonzero number to make one. The reciprocal of 3/4 is 4/3. Zero has no reciprocal, because multiplying zero by any number still gives zero. |
| 16. Integer | A whole-number value that may be negative, zero or positive. Examples include −4, 0 and 7. If an answer must be an integer, a solution such as 2.5 does not meet that condition. |
| 17. Rational number | A number expressible as a/b, where a and b are integers and b ≠ 0. Both 0.75 = 3/4 and −2 = −2/1 are rational. A rational number need not be positive. |
| 18. Square root | A number whose square gives the original number. The symbol √49 denotes the nonnegative square root, 7. The equation x² = 49, however, has two solutions: x = 7 and x = −7. |
| 19. Ratio | A comparison by division, commonly written using a colon. The ratio 2:3 describes two parts compared with three parts. The first amount is 2/5 of the combined total, not 2/3 of it. |
| 20. Rate | A quantity measured per unit of another quantity, such as dollars per kilogram or kilometres per hour. At $3 per kilogram, 2 kg costs $6. Keep the units attached to the relationship. |
Algebra becomes easier to discuss when each part has a clear name. Instead of saying “move that thing”, identify whether you mean a coefficient, a term, a factor or the subject of a formula.
| Term | Meaning and use |
|---|---|
| 21. Variable | A symbol representing a quantity that can take different values. In C = 2n, n may represent the number of notebooks. Naming what n represents prevents confusion between the number bought and their cost. |
| 22. Constant | A value that is fixed in the relationship being considered. In y = 3x + 7, the constant term is 7. The values of x and y may change while that seven remains fixed. |
| 23. Coefficient | A numerical multiplier of a variable term. In −5x + 2, the coefficient of x is −5, including its sign. In x² + 3x, the coefficient of x² is one. |
| 24. Term | A part of an expression separated at the main level by addition or subtraction. In 4x² − 3x + 2, the terms are 4x², −3x and 2. Keep each term’s sign. |
| 25. Expression | A mathematical combination of numbers, variables and operations. For example, 2x + 5 is an expression. Without an equation or further information, there is no instruction to find one particular value of x. |
| 26. Factor | A number or expression multiplied by another to form a product. In 3x(x + 2), the displayed factors include 3, x and x + 2. Factors are multiplied, whereas terms may be added. |
| 27. Equation | A statement that two expressions are equal. The equation 2x + 5 = 13 is true when x = 4. Solving seeks the value or values for which the equality holds. |
| 28. Identity | An equality true for every allowed value of its variables. For example, (x + 1)² = x² + 2x + 1 is an identity. It does not restrict x to one particular number. |
| 29. Formula | A rule connecting quantities using mathematical symbols. A = lw gives the area of a rectangle in terms of length and width. Substitute measurements in compatible units before interpreting the calculated area. |
| 30. Subject of a formula | The variable written alone on one side of a formula. In v = u + at, v is the subject. Making a the subject gives a = (v − u)/t, provided t ≠ 0. |
A valid algebraic change preserves meaning. Pay particular attention to addition, multiplication and denominators: confusing their roles creates mistakes that copying more examples will not necessarily resolve.
| Term | Meaning and use |
|---|---|
| 31. Like terms | Terms with the same variable part, including the same powers. Thus 3x² and −5x² combine to give −2x². A term in x cannot be combined with a term in x² by adding coefficients. |
| 32. Distributive law | The rule a(b + c) = ab + ac, linking multiplication and addition. It gives −2(x − 3) = −2x + 6. The negative multiplier applies to both terms inside the brackets. |
| 33. Common factor | A factor shared by all the terms under consideration. The terms 6x and 9 share a factor of three, giving 6x + 9 = 3(2x + 3). Expanding checks the extraction. |
| 34. Quadratic expression | An expression in one variable whose highest power is two, with a nonzero squared-term coefficient. For example, 2x² − x + 4 is quadratic. The expression 2x + 4 is linear instead. |
| 35. Difference of two squares | The structure a² − b², which factorises as (a − b)(a + b). For example, x² − 25 = (x − 5)(x + 5). A sum of squares does not use this same identity. |
| 36. Algebraic fraction | A fraction containing algebraic expressions, such as (x + 1)/(x − 2). Its denominator must not equal zero, so this example excludes x = 2. That restriction remains relevant during simplification. |
| 37. Denominator | The expression or number below a fraction bar. When adding 1/x and 1/2, use the common denominator 2x to obtain (2 + x)/(2x), with x ≠ 0; do not add denominators. |
| 38. Restriction | A condition limiting the values allowed in a problem or expression. In 1/(x + 3), x cannot equal −3. In a counting problem, the context may also restrict an answer to nonnegative integers. |
| 39. Cancellation | Dividing the numerator and denominator by the same nonzero factor. For x ≠ 0, 6x/(3x) = 2. The x in (x + 2)/x cannot be cancelled across the addition sign. |
| 40. Equivalence | Having the same value or meaning under the stated conditions. For example, 2(x + 3) and 2x + 6 are equivalent. Simplified fractions must retain restrictions inherited from their original denominators. |
Some questions ask for one value; others ask for a set of possible values. Boundary words decide whether an endpoint belongs to the answer, so they deserve the same attention as the numbers.
| Term | Meaning and use |
|---|---|
| 41. Solution | A value or collection of values satisfying the stated conditions. For x + y = 7, the pair x = 3, y = 4 is one solution. A second equation may narrow the possibilities. |
| 42. Root | A value of the variable that makes an expression equal zero. The roots of x² − 9 = 0 are 3 and −3. Check both factors when using (x − 3)(x + 3) = 0. |
| 43. Simultaneous equations | Equations that must hold for the same values of the variables. For x + y = 7 and x − y = 1, x = 4 and y = 3 satisfy both together. |
| 44. Elimination | A method of combining equations to remove one variable. Adding x + y = 7 and x − y = 1 eliminates y and gives 2x = 8. Then use an equation to recover y. |
| 45. Substitution method | A method of solving simultaneous equations by replacing one variable with an equal expression from another equation. If y = 7 − x, substitute that entire expression into x − y = 1, using brackets. |
| 46. Inequality | A statement comparing quantities with symbols such as <, >, ≤ or ≥. The inequality x < 4 includes many values, including −2 and 3.5, unless the question imposes further restrictions. |
| 47. At least | A lower boundary that includes the boundary value. A requirement of at least eight participants means n ≥ 8. Seven fails the condition, while eight satisfies it exactly. |
| 48. At most | An upper boundary that includes the boundary value. Spending at most $20 means cost ≤ 20. A cost of $20 is allowed; a cost of $20.10 exceeds the stated limit. |
| 49. Strictly greater than | Above a boundary without including it. The condition x > 5 excludes five itself. If x is an integer, its smallest possible value is six; otherwise values such as 5.1 are possible. |
| 50. Number line | A line representing numbers in order. For x ≤ 3, a filled endpoint at three includes the boundary and the shading extends left. For x < 3, an open endpoint excludes three. |
Identify what is being compared and what stays constant. “More” does not automatically mean direct proportion, and “less” does not automatically mean inverse proportion. The relationship must support the calculation.
| Term | Meaning and use |
|---|---|
| 51. Direct proportion | A relationship y = kx with a constant k. Doubling x doubles y. At a fixed price of $2 per notebook, total cost is directly proportional to the number bought, with no extra charge. |
| 52. Inverse proportion | A relationship y = k/x, with x ≠ 0 and a fixed non-zero constant k, so the product xy stays constant. For a fixed journey distance, time is inversely proportional to constant speed. Doubling that speed halves the travel time in this model. |
| 53. Constant of proportionality | The fixed multiplier k in y = kx, or the fixed product k in y = k/x. If y = 15 when x = 3 in direct proportion, k = 5. |
| 54. Scale | A stated relationship between a representation and the actual quantity. On a map with scale 1:50,000, one centimetre represents 50,000 centimetres, or 500 metres. Convert units before comparing distances. |
| 55. Scale factor | The multiplier connecting corresponding lengths in similar figures. With positive scale factor three, a length of 4 cm becomes 12 cm. This factor describes lengths; areas do not increase by the same multiplier. |
| 56. Percentage | A proportion expressed per hundred. Twenty-five per cent of 80 is 25/100 × 80 = 20. Always identify the reference quantity represented by the full hundred per cent. |
| 57. Percentage increase | The increase expressed as a percentage of the original amount. A rise from 40 to 50 is 10/40 × 100% = 25%. Dividing by the new amount answers a different comparison. |
| 58. Percentage decrease | The decrease expressed as a percentage of the original amount. A fall from 50 to 40 is 10/50 × 100% = 20%. Equal numerical rises and falls can produce different percentage changes. |
| 59. Original value | The amount before a stated change. If a price becomes $72 after a 20% reduction, $72 represents 80% of the original, so the original price is 72 ÷ 0.8 = $90. |
| 60. Unit conversion | Rewriting a measurement using a different unit without changing its size. Since 1 m = 100 cm, 1 m² = 10,000 cm². The length conversion factor must also be squared when converting areas. |
A graph connects a drawing with a relationship. Name the axes, read their scales and identify what a point means before describing whether the graph rises, falls or changes direction.
| Term | Meaning and use |
|---|---|
| 61. Coordinate | A number specifying a position relative to an axis or reference system. In the ordered pair (3, −2), the x-coordinate is three and the y-coordinate is negative two. Reversing them changes the point. |
| 62. Origin | The point (0, 0) where the two coordinate axes meet. A direct-proportion graph passes through the origin. A straight line with a nonzero y-intercept does not represent direct proportion between x and y. |
| 63. Horizontal axis | The left-to-right axis, usually called the x-axis. Its scale may show one, two or another number of units per interval. Count the labelled values rather than assuming each square represents one. |
| 64. Vertical axis | The up-and-down axis, usually called the y-axis. In a cost graph it might show dollars. A point’s height means little until the axis label and scale have been read correctly. |
| 65. Gradient | The change in y divided by the corresponding nonzero change in x for a straight line. From (1, 2) to (3, 8), the gradient is (8 − 2)/(3 − 1) = 3. |
| 66. Intercept | A point where a graph meets an axis, or its corresponding coordinate value. For y = 2x + 6, the y-intercept is six at (0, 6), and the x-intercept is −3 at (−3, 0). |
| 67. Linear function | A function of the form y = mx + c, whose graph is a straight line. For y = 2x + 3, each increase of one in x increases y by two. |
| 68. Quadratic function | A function y = ax² + bx + c with a ≠ 0. Its graph is a parabola. For y = x², inputs −2 and 2 both produce four, illustrating symmetry. |
| 69. Turning point | The point where a quadratic graph changes from decreasing to increasing, or from increasing to decreasing. The graph y = x² has its minimum at (0, 0); y = −x² has its maximum there. |
| 70. Axis of symmetry | A line dividing a figure into matching reflected halves. For y = x², the axis is x = 0. Points with opposite x-values have equal y-values and lie equally far from this line. |
Geometrical names carry conditions. A theorem that needs a right angle cannot be used merely because a triangle looks almost right-angled. Mark the given facts on the diagram before choosing a relationship.
| Term | Meaning and use |
|---|---|
| 71. Congruent | Identical in shape and size, even if turned over or positioned differently. Congruent triangles have equal corresponding sides and angles. Rotating a triangle changes its orientation, not its side lengths. |
| 72. Similar | Having equal corresponding angles and proportional corresponding sides. Similar figures may have different sizes. Triangles with side lengths 3, 4, 5 and 6, 8, 10 are similar, with scale factor two. |
| 73. Corresponding | Matching in position or role within a stated relationship. In similar triangles, compare each side with its matching side, identified using the vertex correspondence. The side drawn at the bottom is not automatically the match. |
| 74. Perpendicular | Meeting at a right angle of 90°. A rectangle’s adjacent sides are perpendicular. A sloping pair of lines can also be perpendicular; their appearance relative to the page does not decide the angle. |
| 75. Parallel | Lines in the same plane that do not meet however far they are extended. Opposite sides of a rectangle are parallel. Use marked or established facts, rather than estimating parallelism from a rough sketch. |
| 76. Hypotenuse | The side opposite the right angle in a right-angled triangle. It is that triangle’s longest side. Identify the right-angle mark first; the hypotenuse is not defined as whichever side appears slanted. |
| 77. Pythagoras’ theorem | In a right-angled triangle, the square of the hypotenuse equals the sum of the squares of the other two sides. With perpendicular sides three and four, the hypotenuse is √(9 + 16) = 5. |
| 78. Sine | For an acute angle in a right-angled triangle, sine is opposite side divided by hypotenuse. If the opposite side is three and the hypotenuse five, sin θ = 3/5 for that chosen angle. |
| 79. Cosine | For an acute angle in a right-angled triangle, cosine is adjacent side divided by hypotenuse. Here adjacent means the side next to the chosen angle other than the hypotenuse. Mark that angle before labelling. |
| 80. Tangent | For an acute angle in a right-angled triangle, tangent is opposite side divided by adjacent side. With opposite three and adjacent four, tan θ = 3/4. This entry concerns the trigonometric ratio. |
Decide what is being measured: a boundary, a surface or occupied space. Then choose the shape relationship and the correct units. A familiar solid may have several different measurements associated with it.
| Term | Meaning and use |
|---|---|
| 81. Perimeter | The total length around the boundary of a plane figure. A rectangle measuring 5 cm by 3 cm has perimeter 16 cm. Its perimeter is not its area and uses length units. |
| 82. Area | The measure of a two-dimensional region. A rectangle measuring 5 cm by 3 cm has area 15 cm². The squared unit reflects counting unit squares, rather than measuring only the outside edge. |
| 83. Volume | The amount of three-dimensional space occupied by a solid or contained by a region. A cuboid measuring 2 cm by 3 cm by 4 cm has volume 24 cm³, using cubic units. |
| 84. Surface area | The combined area of the surfaces being counted. A closed box includes its top; an open box may not. Identify the exposed or required faces before adding areas, and express the answer in square units. |
| 85. Cross-section | The two-dimensional shape made by a plane cutting through a solid. A slice parallel to a cylinder’s circular base is a circle. The direction of the cut matters when naming the cross-section. |
| 86. Prism | A solid with two parallel, congruent polygonal bases joined by parallelogram faces. Its volume is base area multiplied by perpendicular height. A triangular prism’s volume depends on the triangular area, not merely its base length. |
| 87. Pyramid | A solid with a polygonal base and triangular faces meeting at an apex. Its volume is one-third × base area × perpendicular height. The height goes perpendicularly to the base plane, not along a sloping edge. |
| 88. Cylinder | In the usual right circular cylinder, two equal circular bases are joined by a curved surface. Its volume is πr²h. For r = 2 cm and h = 5 cm, the volume is 20π cm³. |
| 89. Cone | A solid with a circular base narrowing to an apex. A right circular cone has volume πr²h/3. Its perpendicular height and slant height are different measurements; select the one required by the formula. |
| 90. Sphere | A three-dimensional shape whose surface points are all the same distance from its centre. That distance is its radius. Its surface area is 4πr² and its volume is 4πr³/3. |
Statistics vocabulary helps a student describe a collection of values without hiding its differences. Probability vocabulary helps distinguish what could happen from what must happen. Keep the underlying data or possible outcomes visible.
| Term | Meaning and use |
|---|---|
| 91. Frequency | The number of times a value or category occurs. If four students each read three books, the frequency for three books is four. Do not confuse the number of books with its frequency. |
| 92. Distribution | The way data values are spread across possible values or categories. Two groups can have the same mean but very different distributions. Inspect their data or graphs before deciding their experiences are similar. |
| 93. Mean | The sum of all data values divided by the number of values. The mean of 2, 4 and 9 is 15 ÷ 3 = 5. Repeated observations must each be counted. |
| 94. Median | The middle value after data are ordered. For 2, 3, 8, 10, the median is the mean of the two middle values: (3 + 8)/2 = 5.5. Sorting comes first. |
| 95. Mode | The value or category occurring most frequently. For 1, 2, 2, 5, the mode is two. A dataset may have more than one mode, so inspect the frequencies rather than expecting exactly one. |
| 96. Grouped data | Data collected into classes rather than showing every individual value. When only intervals and frequencies are known, class midpoints can estimate the mean. The estimate need not equal the mean of the unseen original values. |
| 97. Histogram | A graph displaying frequencies across numerical intervals using adjoining rectangles. With equal class widths, taller rectangles represent higher frequencies. More generally, rectangle area represents frequency, so different interval widths require care when interpreting heights. |
| 98. Outcome | One possible result of a chance process. Rolling a standard die has possible face outcomes one to six. Listing outcomes accurately is the starting point for calculating probabilities in a simple model. |
| 99. Event | A collection of outcomes satisfying a condition. Getting an even number on a standard die corresponds to the outcomes two, four and six. One event can therefore contain several individual outcomes. |
| 100. Probability | A measure of chance from zero to one. For equally likely outcomes, divide favourable outcomes by all possible outcomes. A fair standard die has probability 3/6 = 1/2 of an even result. |
Read the whole relationship before writing symbols
“Three less than twice a number” becomes 2x − 3. “Twice the difference between a number and three” becomes 2(x − 3). The same familiar words appear, but their grouping changes. If x = 10, the first expression gives 17 and the second gives 14. Ask the student to explain what is doubled in each sentence. This reveals whether the brackets reflect understanding or a remembered visual pattern.
Translate the boundary, then interpret the answer
Suppose an activity has a $4 entry charge and costs $3 per game. A student can spend at most $22. Let n be the number of games. The condition is 4 + 3n ≤ 22, giving n ≤ 6. Since n counts games, it must be a nonnegative integer; six is the greatest permitted number. If the instruction changes to spending less than $22, six games no longer qualifies. The calculation must respect the changed boundary.
Keep the condition when simplifying
Consider (x² − 9)/(x − 3). Factorising the numerator gives (x − 3)(x + 3)/(x − 3). The common factor can be cancelled when x ≠ 3, leaving x + 3 with that same restriction. At x = 3, the original fraction is undefined, even though the simplified expression alone would give six. A complete explanation connects factorisation, cancellation and the denominator restriction; crossing out symbols without that connection can conceal an invalid step.
Explain why a method applies
For a triangle with side lengths 5 cm, 12 cm and 13 cm, the longest side is 13 cm. Calculate 5² + 12² = 25 + 144 = 169, which equals 13². This establishes that the triangle is right-angled. The vocabulary matters: “longest side” identifies the candidate hypotenuse, while “justify” asks for the numerical relationship. A drawing that looks right-angled would not provide the same reasoning.
Try these six questions without looking at the tables. Say what each instruction means before working. This is a learning check, not a school grade prediction. The explanation is as useful as the final answer.
- Simplify 4x + 3 − x. Explain why this is not a request to solve for x.
- Factorise x² − 16. Then solve x² − 16 = 0. Explain the difference between the two answers.
- A whole number n is at least four and strictly less than seven. List every possible value.
- For y = 3x + 2, identify the gradient and y-intercept. Is y directly proportional to x?
- A dataset contains 2, 2, 5, 7 and 9. Find its mean, median and mode, showing which definition you use.
- A fair standard die is rolled once. List the outcomes in the event “greater than four”, then calculate its probability.
Answers and what they reveal
- 3x + 3. Combining like terms changes the expression’s form. There is no equation stating what that expression equals, so no single x-value has been specified.
- (x − 4)(x + 4); x = 4 or x = −4. Factorisation produces a product. Solving the equation identifies the values making that product zero.
- 4, 5 and 6. “At least” includes four. “Strictly less than” excludes seven. The whole-number condition excludes intermediate fractions and decimals.
- Gradient three; y-intercept two; no. The added constant means the graph does not pass through the origin. A straight line alone does not establish direct proportion.
- Mean five, median five, mode two. The sum is 25 across five observations; the middle ordered value is five; two occurs most frequently.
- Outcomes five and six; probability 2/6 = 1/3. Two of the six equally likely outcomes satisfy the event. The fraction does not guarantee a result within three rolls.
If the definitions are clear but the arithmetic is incorrect, repair the calculation. If the arithmetic is sound but the wrong operation is chosen, return to the wording. If a student answers only after hearing a hint, record that the idea still needs independent practice. A useful next question changes the numbers and wording while keeping the same mathematical relationship.
Begin with a small selection from the current school chapter, perhaps six terms. Write the term on one side of a card and an explanation with an example on the other. Add a contrasting example where it helps: an expression beside an equation, a factor beside a term, or “at least” beside “strictly greater than”. The contrast gives the definition a boundary.
During a short practice session, explain each term without reading, complete one question and check the answer. Revisit the same selection on another day before adding more. A suggested ten-minute session might contain three minutes of recall, five minutes of application and two minutes of correction. Adjust that suggestion to the student’s workload; completing every card in one sitting is unnecessary.
Use a simple record with three observations: “I can explain it”, “I can use it” and “I can recognise when it does not apply”. A student might explain inverse proportion correctly but still mistake every decreasing relationship for inverse proportion. Keep that term in practice until the student can test the constant-product condition. Familiarity is useful, but application supplies stronger evidence.
A useful small-group activity gives every pupil a chance to think before anyone supplies an answer. The tutor can begin with one short question for each student to attempt independently. Students then explain the key term in their own words. This makes it easier to notice whether one student needs vocabulary support while another understands the language but makes a procedural error.
For an inequalities activity, one student reads a spending condition, one translates it into symbols and one checks the boundary value. Rotate the roles for the next question. If the condition changes from “at most” to “less than”, all three should decide individually what changes before discussing it. A confident speaker should not become the group’s permanent answer source.
Finish with a new independent question that uses the same idea in a different context, such as a capacity limit instead of a budget. The tutor can then choose a precise continuation task for each pupil. This is an illustration of a lesson design, not a statement about a currently available class, timetable or guaranteed result.
Ask, “Which word tells you what your answer should look like?” Then allow the student time to respond. A parent does not need to supply the method immediately. For a geometry question, useful follow-ups include, “Which angle is given?” and “What condition does that theorem need?” These questions direct attention to meaning while leaving the mathematical decisions with the student.
Bring one or two specific examples to the teacher or tutor when a difficulty persists. “She reads at most as strictly less than” is more informative than “She is careless”. “He factorises correctly but stops before finding both roots” identifies a different teaching need. Keep the corrected example beside the original so that progress can be seen in an actual piece of work.
Match help to the student’s situation. A student rebuilding foundations may need a few essential terms and uncomplicated examples. A student keeping up may benefit from mixed questions that require choosing the correct idea. A student ready for greater depth can explain why a tempting answer fails or construct a counterexample. All three routes can develop precision without rushing into unrelated chapters.
Must students memorise all 100 terms before doing questions?
No. Use the relevant terms while solving questions, then revisit uncertain ones. The numbering helps readers locate entries; it is not a prescribed teaching order or a claim that each term is equally urgent for every student.
Are some entries from Secondary 1 rather than new Secondary 2 topics?
Yes. Words such as coefficient, ratio and gradient remain necessary when later questions become more complex. An earlier concept can still be the point where a current solution breaks down, so the list includes prerequisite language.
Does learning this vocabulary guarantee a higher Mathematics grade?
No. Accurate language supports understanding, but students also need conceptual knowledge, calculation, practice and sound reasoning. Improvement should be checked in independent work and the feedback provided by the school.
Should this replace the school syllabus or examination instructions?
No. Follow the school’s current topic plan and assessment notice. This guide explains useful language and provides original practice; it does not prescribe paper duration, calculator arrangements, assessment weightings or an official marking scheme.
- MOE: G3 and G2 Mathematics syllabuses, Secondary One to Four — consult Section 3 for G3 content by level.
- SEAB: Secondary Education Certificate — national qualification and subject-level information.
- Meridian Secondary School: 2026 school-based assessment — an example of a school publishing its own lower-secondary assessment information.
The definitions, examples, diagnostic questions and teaching suggestions on this page are original eduKate explanations. They are provided to make mathematical language usable, and are not official examination questions or government endorsements.
Choose the next resource that matches the work you are doing now.
- Making Sense of Secondary 2 Mathematics Syllabus — Connect the vocabulary to the wider subject and its learning demands.
- English Vocabulary Lists: Primary 1–6, PSLE and Secondary 1–4 — find further language practice organised by learning stage and purpose.
