A student who takes a mixture of G1, G2 and G3 subjects in the 2027 Singapore-Cambridge Secondary Education Certificate (SEC) does not receive one interchangeable national points score. Each subject keeps its original level and grade: G1 uses A–E, G2 uses 1–6 and G3 uses A1–9. SEAB permits downward grade mapping only for specified post-secondary aggregates. For example, a G3 Science D7 maps to G2 Grade 3 for an eligible G2-level computation and then to G1 Grade A if a G1-level ITE calculation requires it; it never means that the student sat an original G1 A examination. A G1 grade cannot be mapped upwards to manufacture a G2 or G3 result.
For parents choosing JC, polytechnic, PFP or ITE after SEC results in January 2028, the correct first step is to make separate scorecards for each receiving route. ITE Year 1 uses a prescribed four-subject G1-equivalent formula, ITE direct Year 2 and PFP assess eligible five-subject G2-equivalent ELMAB3 results, JC/MI require qualifying G3-based L1R4 subjects, and direct polytechnic Year 1 uses the revised ELR2B2 pattern. The same teenager may satisfy some routes but not others. This parent guide gives worked calculations, explains the restricted mapping direction and shows how to discuss the actual subject mix with a school counsellor.
- G1 grades: A–E; G2 grades: 1–6; G3 grades: A1, A2, B3, B4, C5, C6, D7, E8 and 9.
- Official G3-to-G2 mapping: A1–B3→1; B4–C6→2; D7→3; E8→4; 9→5.
- Official G2-to-G1 mapping: Grades 1–3→A; 4→B; 5→C; 6→D.
- G3 D7 therefore maps via G2 3 to G1 A only when both stages are permitted by the receiving aggregate.
- Never map G1 upward to G2 or G3; the original SEC level remains on the certificate.
- ITE Year 1’s four-subject G1 calculation differs from G2-equivalent ELMAB3 for PFP and direct ITE Year 2.
- From 2028 JC uses a five-subject qualifying G3 L1R4; direct polytechnic allows a designated G2 component within its revised ELR2B2.
- Course-specific English, Mathematics, relevant-subject minima and selection still matter after the aggregate is calculated.
A complete SEC profile should have more than a total
Imagine a learner with G1 English B, G2 Mathematics 3, G3 Science D7, G2 Humanities 2, G1 Computing A and G3 Mother Tongue C6. The full record contains six subjects offered at three different levels. A parent who adds the symbols without conversion will produce nonsense, while a parent who relabels every original result as G1 will erase meaningful information about the level of examination the learner actually sat.
Start with one row per subject. Write its official name, the level, the original grade and whether it is compulsory for a particular next-stage programme. Use a separate column for any mapped value, and leave it blank for routes where mapping is not allowed or not needed. A student can use the same original grade in more than one legitimate computation only when each receiving route expressly allows that subject and level.
The common certificate is meant to show that learners may have strengths at different demand levels. The family’s response should respect that rather than push every result into a hierarchy. A G3 D7 may indicate meaningful effort on a more demanding paper, while a G1 A may show strong performance on a different paper. The school can help explain how the choices were made and what they mean for the teenager’s next steps.
The exact downward mapping tables, in both stages
SEAB’s G3-to-G2 table maps A1 through B3 to G2 Grade 1, B4 through C6 to G2 Grade 2, D7 to G2 Grade 3, E8 to G2 Grade 4 and Grade 9 to G2 Grade 5. These mappings are used for eligible receiving computations, not to change the grade printed on the original certificate. A separate G2-to-G1 table maps G2 Grades 1–3 to G1 A, Grade 4 to G1 B, Grade 5 to G1 C and Grade 6 to G1 D.
When a receiving programme requires a G1-level aggregate and an eligible subject was taken at G3, a two-step calculation may apply: G3 is first mapped to G2, then the G2 value to G1. For instance, G3 Mathematics E8 becomes G2 Grade 4 and then G1 B; G3 Science Grade 9 becomes G2 Grade 5 and then G1 C; G3 D7 becomes G2 Grade 3 and then G1 A. Keep each intermediate value visible so the calculation can be checked.
The map is not bidirectional. G1 A is not automatically equivalent to an actual G2 Grade 1 or G3 A1 for admission to a route that needs those more demanding subjects. If a programme specifies a G3 English Language minimum, a G1 English A cannot satisfy it by renaming the symbol. This rule is particularly important for families with one strong G1 result and several weaker G2/G3 results who might otherwise assume the strongest letter should dominate every admission formula.
A worked four-subject G1-equivalent ITE Year 1 calculation
Take G1 English B, G2 Mathematics 3, G3 Science D7 and G1 Design & Technology C as an illustrative set. For an ITE Year 1 course that permits those four under its required aggregate type, G1 English B contributes two points and G1 Design & Technology C contributes three. G2 Mathematics 3 maps to G1 A for one point. G3 Science D7 maps to G2 Grade 3 then G1 A for one point. The illustrative total is 2 + 1 + 1 + 3 = 7 ITE G1-equivalent points.
Do not infer that every Higher Nitec programme accepts that subject combination. Some courses use relevant-subject structures and have minimum English, Mathematics or Science grades. A low total may make an application numerically attractive but cannot override the absence of a compulsory subject or a requirement to pass a practical assessment. The named course entry table must be consulted.
This calculation also does not upgrade the G1 English B to a G2 subject. A course requiring five G2-or-higher subjects may have a different or incomplete eligible portfolio. If the parent has only four items in the G1 calculation, it may be impossible to compute a valid five-subject ELMAB3. A calculator that invents a fifth qualifying subject because it wants to show every route is not helpful.
A worked G2-equivalent ELMAB3 calculation with a missing subject
Suppose another learner offers G3 English B4, G2 Mathematics Grade 2, G3 Science D7, G2 Humanities Grade 2 and G2 Mother Tongue Grade 3. Under a receiving route that accepts all five subjects for ELMAB3, English B4 maps to G2 2 and Science D7 maps to G2 3. The illustrative raw sum is 2 + 2 + 3 + 2 + 3 = 12. That number is meaningful only if the subject categories and each compulsory subject grade satisfy the named programme’s rules.
This raw ELMAB3 twelve can be compared with PFP’s general raw twelve-or-better screen and ITE direct Year 2’s general raw nineteen-or-better screen. Neither programme is guaranteed by the aggregate alone. PFP has minimum English, Mathematics and relevant-subject grade requirements, and the chosen cluster or specialist programme may have additional conditions. The family should check all of these before assuming an application is eligible.
Now replace the G2 Mother Tongue Grade 3 in the example with G1 Mother Tongue A. That new G1 result cannot simply be treated as G2 Grade 1 or Grade 3. The student has only four subjects at G2/G3 levels in this revised example, so a five-subject ELMAB3 cannot be completed from this set. The original G1 A may be a strong personal result without satisfying the receiving programme’s five-subject structure.
JC and MI must be assessed from their qualifying G3 subjects
MOE has announced that JC will move to a five-subject gross L1R4 with a general numerical threshold of sixteen or better from the 2028 intake; MI has its own gross L1R4 threshold of twenty. Both require prescribed qualifying G3 subject categories and compulsory minimum grades. A student who takes only two G3 subjects cannot create the other required G3 components by mapping strong G1/G2 grades upwards.
The required JC L1R4 components include a language, a Humanities subject, a Mathematics or Science subject, an additional specified relevant subject, and another eligible subject. The actual admissions rules define what can count and the relevant individual grade conditions. A learner with five G3 subjects may be able to calculate the aggregate but still fail a compulsory grade requirement, or may need to consider how competitive the named college will be.
Parents should also ask whether a two- or three-year pre-university course is the right learning environment. A teenager who is prepared for long academic study may prefer JC or MI if genuinely eligible, while another may be more motivated by applied learning. A missing qualification should be addressed through a valid next-stage route rather than an imagined grade conversion.
Polytechnic Year 1 uses the revised ELR2B2 pattern
From 2028, MOE’s direct polytechnic Year 1 arrangement permits one designated best-subject component at G2 level, while the other prescribed components remain at G3. The general net ELR2B2 numerical threshold is twenty-two, with individual diploma minimum entry requirements. This expansion is useful for some mixed G2/G3 candidates, but it does not allow every G2 subject to replace a required G3 English, Mathematics or relevant-subject component.
If a learner takes four eligible G3 components and one G2 subject that can occupy the permitted best-subject position, their school counsellor can check whether the revised ELR2B2 is valid. Even then, each diploma may require specific English, Mathematics or relevant science grades. A future course cut-off is not a guarantee of admission, especially before the first SEC-based 2028 posting has taken place.
The difference between raw and net aggregates matters. PFP’s general ELMAB3 screen is raw; direct polytechnic’s general ELR2B2 threshold is stated as net. Parents should not subtract bonus points automatically from every national admissions number. Follow the formula’s own published definitions and ask for clarification if a calculator offers no indication of the score type.
The original Posting Group does not fix the final SEC subject mix
Under Full Subject-Based Banding, students may study selected subjects at different demand levels where the school and eligibility arrangements permit. The original PSLE Posting Group helps determine the starting educational context, but it does not by itself specify the level of every final SEC subject. Parents deciding on a secondary school should investigate support for mixed-level learning rather than assuming that a PG1 child will forever take only G1 papers.
Ask the current school how it decides when a pupil can take a more demanding subject level and what academic support accompanies the decision. A child with strong Mathematics readiness but weaker English may benefit from a differentiated plan, but the child’s timetable and wellbeing also matter. Pursuing a harder subject solely for prestige without adequate foundation can be counterproductive.
At SEC results time, stop using the primary-school PG label as a substitute for grades. The next-stage receiving institution checks actual subject levels and specified minima. A learner might hold a combination of G1, G2 and G3 results, and eligibility can only be assessed by applying each programme’s published requirements to that actual combination.
How a parent can audit a mapping calculator
Ask the calculator to display its source, admission year and eligible route. Does it preserve the original subject levels? Does it map only in the authorised direction? Does it use the correct subject composition? Does it label a raw versus net aggregate? Does it check compulsory individual grades? Can it handle more than five subjects and choose the correct allowable best subjects? If those answers are missing, treat the output as an illustration, not an admissions decision.
A good calculator should also leave the route blank when the student lacks enough qualifying subjects. It should not assign a numeric G2 value to G1 A or call an ITE B4 of twelve a PFP ELMAB3 twelve. It should distinguish the general eligibility screen from actual named-course allocation and identify which data are not yet available for the 2028 intake.
Parents can do a final manual check with a counsellor: read the certificate aloud line by line, write the map beside each eligible subject and confirm the named programme’s minimum requirements. The goal is to prevent false optimism and unnecessary disappointment. Accuracy gives families more useful choices than a calculator that always produces an answer.
One SEC certificate, several different post-secondary eligibility calculations
The first Singapore-Cambridge SEC in 2027 records subjects offered at G1, G2 and G3 without erasing their differences. The common result certificate does not mean the pupil took all subjects at one demand level. Parents should write down the subject name, level and grade before trying to add any number. SEAB’s grading systems are G1 A–E, G2 Grades 1–6 and G3 A1, A2, B3, B4, C5, C6, D7, E8 and 9. These structures are related by permitted downward mapping, not by a universal replacement rule.
The receiving institution is responsible for defining which subjects enter its aggregate, whether the total is raw or net, and what minimum individual grades apply. For ITE Year 1, a prescribed four-subject G1-equivalent measure is relevant. For direct entry into the second year of Higher Nitec, the general numerical screen is an eligible raw G2-equivalent ELMAB3 of nineteen or better. For PFP, the general raw G2-equivalent ELMAB3 screen is twelve or better with separate compulsory subject conditions. None of these numbers is a direct JC result.
From the 2028 intake, MOE’s revised JC general gross L1R4 numerical threshold is sixteen using qualifying G3 subjects; MI has a separate gross twenty numerical standard with its own prescribed subjects. Direct polytechnic Year 1 has a revised net ELR2B2 general threshold of twenty-two, using the specified G3 components and a permitted G2 best-subject component. These are general screens, not guaranteed admission to a named institution or course, and families must check the detailed published entry conditions.
An online score calculator should refuse to show a route when the student lacks its required subject-level portfolio, rather than invent equivalent grades. G1 A cannot be promoted to G3 A1 merely because the teenager wishes to apply for JC. A G2 Grade 2 is not automatically a G3 A2 either. If the family is unsure, ask the school education and career guidance counsellor to verify the underlying subjects and the receiving programme’s criteria.
Why a good aggregate can still be ineligible for a named course
A common source of disappointment is counting a course’s aggregate correctly but overlooking one compulsory subject grade. A child might have strong grades in optional subjects but a weak result in English or Mathematics, which a particular programme may require. The general ITE, PFP, JC or polytechnic numerical screen will not waive that condition. Parents should read each named programme’s minimum entry requirements alongside the aggregate rather than treating a numeric threshold as a blanket licence to apply.
Some programmes may include aptitude interviews, selection, portfolios, practical assessments, medical conditions or specialised requirements where these are relevant. The full application process should be checked for the exact intake year and programme. A student’s confidence may improve when parents use evidence to distinguish a genuine eligible course from one that is merely attractive in the abstract. Hope and accuracy work better together than false assurances.
Course suitability also includes the learning tasks. Technical training can involve safety rules and written reports; business training can require spreadsheets and communication; design can demand revisions and presentations. A student who likes an industry should explore what a normal week of study includes before accepting a course. The most useful backup is one the teenager is truly willing to attend, not a course inserted solely to fill a preference list.
How to work with a school ECG counsellor and the teenager
Bring the complete SEC result slip, a list of named courses and any questions about individual grades. Prepare a one-page worksheet with the academic route, aggregate type, compulsory subject minima, student interest, actual campus and the most recent official source. Ask the counsellor to show where any downward mapping applies and where the result does not contain enough qualifying subjects for an application. Uncertainty should be recorded rather than hidden behind a confident-looking number.
The teenager should be present in the decision. Ask what tasks they enjoy, what they find difficult, which courses they want to understand and what travel they could sustain. The student might prefer a practical curriculum even when an academic route is possible, or may be keen to develop theoretical foundations if legitimately eligible. Parents can provide structure and information without deciding every preference on their behalf.
A results-day score can be emotionally important, but the next qualification depends on further learning. Parents can set a small routine of reading instructions, checking numerical work, planning transport and seeking feedback. The purpose is to make the first semester manageable, not to repeat an entire national examination during the holidays. A child needs both realistic admission information and confidence that skills can continue developing.
How to check course locations, travel and family costs
ITE’s three main campuses are College Central at 2 Ang Mo Kio Drive, College East at 10 Simei Avenue and College West at 1 Choa Chu Kang Grove. A programme may be available only at a subset of campuses, and a specialisation may have an even more specific location. Families should use the current ITE course finder for course and campus availability, not assume the nearest building teaches all subjects. The same principle applies when checking polytechnic diploma campuses and JC programmes.
Test the journey from the actual home to the campus gate before the expected reporting time and after a late class. Account for walking, transfers, practical sessions and possible industry placements. A shorter commute can preserve sleep and study time, while a longer journey may be worthwhile when a particular eligible course strongly suits the student. The comparison should be sustainable across a normal term, not based on a weekend trip to an open house.
Look at real fees, transport, required materials, uniforms or devices and published financial assistance. Eligibility for financial support depends on the current scheme and household circumstances. Avoid assuming that every household qualifies or buying expensive equipment before the college confirms what is required. Family affordability and the teenager’s ability to travel independently are part of course fit, not afterthoughts.
A parent-ready results-day checklist
- Copy every SEC subject, actual G1/G2/G3 level and original grade from the official result slip.
- Identify the intended route before calculating the aggregate: ITE Year 1, direct ITE Year 2, PFP, JC/MI or direct polytechnic Year 1.
- Use only the specified eligible subjects and permitted grade mapping for the named programme.
- Check the general numerical screen and compulsory individual grades separately.
- Confirm course availability, campus, any other entry conditions and the correct application year.
- Ask the student to describe real modules and what they are prepared to practise.
- Compare travel, costs, financial support and any health or caregiving needs that affect the routine.
- Choose realistic, genuinely acceptable programmes and keep an evidence-based backup.
- Follow official 2028 PSE and institution instructions rather than carrying forward an older GCE timetable.
- After an offer, prepare study habits and orientation arrangements rather than continuing to compare scores.
The 2028 timeline and what cannot yet be promised
The first common SEC examinations take place in 2027 and the results will be released in January 2028. MOE announced a new Post-Secondary Admissions Exercise (PSE) beginning in 2028 so eligible candidates can consider relevant routes using their SEC results. The publication date of this article is 18 November 2026, so the actual final course-specific 2028 posting cut-offs do not yet exist. Families should not treat an earlier GCE last-admitted score as a guaranteed SEC prediction.
MOE has announced that when candidates are tied on the applicable net aggregate, PSE prioritises citizenship, then choice order, then gross aggregate, then computerised balloting. Preference order therefore matters, but a cleverly ranked application cannot overcome academic ineligibility. Parents should rank only courses the teenager would actually want and keep the official application confirmation.
Early admissions and course-specific processes may have separate conditions and dates. Confirm the instructions for the intended intake and avoid using a 2026 GCE calendar as the definitive 2028 SEC timeline. Once the results and allocation dates are officially announced, check the receiving institution’s own notice before making any commitment, travel arrangements or purchases.
Frequently asked questions
Can a G3 D7 become a G1 A for an ITE calculation?
Yes, when a receiving G1-level formula allows the two-stage downward map through G2 3; the original result remains G3 D7.
Does G1 A equal G3 A1?
No. G1 A is a result at a different examination demand level, and mapping is not an upward equivalence.
Can G1 English A contribute to PFP ELMAB3?
Not by being mapped upwards to G2. PFP uses its prescribed qualifying G2/G3 subjects and minima.
Can one G2 subject count for direct polytechnic from 2028?
MOE’s revised ELR2B2 permits a specified G2-level best-subject component, while other required components remain G3 and diploma minima still apply.
Is raw ELMAB3 12 an automatic PFP place?
No. The raw aggregate is one eligibility screen; compulsory subject grades and selection still apply.
Does the learner’s PSLE Posting Group decide every SEC subject level?
No. The actual final subject levels and grades on the SEC certificate determine route-specific applications.
Related score guides and official sources
This is a companion to the existing SEC G1 score-by-score series, not a new score 21–24. The theoretical four-subject G1-equivalent ITE point range ends at twenty. For parent-friendly examples, see Score 5, Score 8, Score 12, Score 16 and Score 20. Each page discusses its particular score and why a score in one route should not be borrowed for another.
- SEAB: Singapore-Cambridge SEC grading and mapping
- SEAB: 2027 G1 syllabuses
- MOE: 2028 PSE introduction and tie-breaking
- MOE: Full Subject-Based Banding and polytechnic admission changes
- ITE: Full-time three- and four-year Higher Nitec programmes
- ITE: Course finder
- ITE: College Central, East and West locations
- MOE: SchoolFinder
- School ECG: 2028 ITE Year 1 and Year 2 pathways
- eduKateSG: Clementi teaching structure reference
Information checked 18 November 2026. Worked candidates and point totals are hypothetical examples, not official posting outcomes or guarantees of placement. Families should verify the current named-course minimum requirements, intake dates, subject eligibility and campus when the first SEC-based 2028 admissions exercise opens.
