If your child enters Secondary 1 through Posting Group 3 after the 2026 PSLE, use the 2027 timetable to confirm their Mathematics level and start with the working they produce in class. In G3 Mathematics, signed numbers, fractions and algebra can appear in the same question. Ask your child to show one operation or decision on each useful line. When an answer is wrong, find the first line where the relationship, sign or unit changed incorrectly.
After a marked task, choose one recurring error to repair. Keep the original attempt, explain the first incorrect step and solve a fresh question that needs the same idea. Check with an estimate, substitution, a diagram or the original question. Use the teacher’s current instructions for how to show working, which tools are allowed and which topics are due next.
- Confirm the student’s actual subject level and the school’s current topic and assessment instructions.
- Find the first incorrect step, including whether the setup misread the story before any calculation began.
- Explain the correction in words and check the answer by a method that could reveal the same error.
- Reattempt a short new question independently, then try the skill again after a delay.
- Bring the teacher the original line, the new attempt and one precise question if the same mistake recurs.
Carry Primary Mathematics habits into Secondary 1
The Ministry of Education’s G2 and G3 Mathematics syllabuses include negative and rational numbers, approximation, algebraic expressions and linear equations in Secondary 1. The secondary curriculum continues to develop reasoning and problem-solving alongside procedures. The school decides the teaching sequence and sets its own class tasks and assessments. Yishun Secondary School’s published 2026 G3 outline, for example, shows work on signed numbers and fractions before early algebra. Use the outline or teacher’s instructions for your child’s 2027 class to see what comes next. MOE G2 and G3 Mathematics syllabuses · Example of a school Mathematics outline.
For a PG3 student, use the actual Mathematics subject level shown on the timetable or school notice. The skills in this guide are useful across lessons, but the teacher’s task determines the way the student practises and shows the idea. Ask which class topic the practice is meant to reinforce and whether the teacher expects an exact answer, an estimate, a particular form of working or a final statement in context. Treat a sample from school as evidence of what your child needs next.
Keep the representation that makes sense
Many pupils can solve a Primary Mathematics question with bar models, drawings, repeated groups or reasoning about one unit. Those representations remain useful. A secondary solution may show the same relationships in algebraic notation. When a student first writes an equation, let them draw the groups and say what the unknown represents. After writing the equation, ask them to point to the object or relationship that each complete term describes.
Suppose four identical bookmarks and a folder costing $3 total $19. A bar model has four equal pieces beside one piece worth $3. Take the folder price away to leave $16 for the four bookmarks. Each costs $4. Algebra names the bookmark price b and writes 4b + 3 = 19. Subtract 3 from both sides to get 4b = 16, then divide both sides by 4. Finally, check that four bookmarks at $4 plus $3 give $19. Both representations describe the same purchase.
Now change the story slightly. Four sets each contain a bookmark and a $3 folder and the four sets cost $28. The equation becomes 4(b + 3) = 28. In the diagram, every group contains both items. Dividing both sides by 4 gives b + 3 = 7, so b = 4. The two answers happen to match, but the stories need different equations. Explaining where the folder sits is a better test of understanding than noticing the final answer by itself.
Make the working tell the next reader what happened
Show enough to let you or a teacher identify each decision. For a short calculation, this might mean one line to rewrite a subtraction, one to compute and one to answer in units. For a word problem, include the meaning of the unknown, the equation and the final meaning of the answer. Keep the original order of the operations visible until you act on them. Use the teacher’s conventions for layout.
The equals sign means that expressions on both sides represent the same value. If you write a chain of equalities, every expression in that chain must have the same value. Consider 3 + 5 × 2. The valid chain is 3 + 5 × 2 = 3 + 10 = 13. Writing 3 + 5 = 8 × 2 = 16 creates two issues. It changes which operation happens first and places expressions with different values in one chain. If you need a separate calculation, begin a new line and label how it is used.
An equation is a statement about when two expressions are equal. To solve it, show equivalent equations that preserve the same solution. Put the new equation on the next line. You can link the solution steps with brief wording such as “subtract 5 from both sides” if that is useful. This presentation makes it easier to see what was done to both sides and check whether the same value of the unknown still works.
Check the method before checking neatness
Give the child an original answer and ask where the reasoning can first be evaluated. If they immediately calculate more neatly, ask them to preserve the first attempt. A working error can happen before any arithmetic. For example, a student might interpret “three fewer than twice the number” as 3 − 2n and then carry out each calculation accurately. A correct computation can follow the wrong expression. The repair belongs where the meaning changed.
A student may also get the correct answer through steps that fail to preserve equivalence. For instance, if a child subtracts one quantity from the first side and applies a different rule to the second, the end result may only be correct by coincidence. Plugging the proposed answer into the original equation checks the result, while examining each line checks whether the reasoning can be reused. Ask for both checks when an answer and its method seem to tell different stories.
Repair signed numbers and fractions
Start with the action a sign describes. A negative sign can belong to a number, indicate the opposite of an expression or appear in a subtraction. A minus sign written in a hurry can change roles without the student noticing. Brackets make the grouping visible. A number line or a simple comparison with zero helps test whether an answer is reasonable. Use the notation your teacher expects for the problem.
Read signed addition and subtraction carefully
Consider −6 + 9. Start at −6 and move nine units to the right when adding a positive 9. The result is 3. Now try −6 − 9. Starting at the same point, subtracting a positive 9 moves nine units to the left, giving −15. Compare the two on the same number line. Which operation moves toward zero first? Which operation moves farther below zero? The direction matters more than recalling a slogan about signs.
Consider 4 − (−7). Subtracting −7 is equivalent to adding 7, so the result is 11. Check it with an inverse operation. If 11 is the value of 4 − (−7), then adding back −7 should return 4. It does. A common incorrect line is 4 − (−7) = 4 − 7 = −3. Find the first change and explain why losing the negative sign inside brackets changes the operation.
Try a short contrast on paper. The value of −8 + 3 is −5. The value of −8 − 3 is −11. The value of −8 − (−3) is −5. Ask your child to explain why the first and third have the same value. Then give a fresh pair, such as −2 − (−9) and −2 + 9. Saying which expressions are equivalent helps the student distinguish a method from a single remembered answer.
Keep order of operations and grouping visible
In 12 − 4 × 3, find 4 × 3 first. The expression becomes 12 − 12, which is 0. In (12 − 4) × 3, the brackets tell you to subtract first, so the result is 24. Write the intermediate line in each case. Ask the student to explain which instruction the brackets change. If a calculator is permitted, key in the same grouping and compare its result with the written estimate.
A negative sign can alter what is squared. In (−4)², the whole signed number is squared, so the result is 16. In −4², the square applies to 4 before taking its negative, so the result is −16. Read the brackets aloud and rewrite the expression as multiplication or as the negative of a square. A student who writes both as “minus four squared” can make the distinction clearer by saying “the square of negative four” or “negative of four squared.”
Try 7 − 2 × (−3). The product 2 × (−3) is −6. The whole expression then becomes 7 − (−6) = 13. The sign error often arises after the multiplication when the negative value is placed back into the subtraction without brackets. Keeping brackets around the result on the next line shows which value is being subtracted. Check that the answer is greater than 7, since the second quantity subtracted is negative.
Rewrite fractions into equal parts before adding
To find 3/4 − 2/3, use a common denominator. Both fractions can be expressed in twelfths. Three quarters is 9/12 and two thirds is 8/12, so the difference is 1/12. The denominator describes the size of the parts. Once the parts are the same size, compare their counts. Drawing two equal-length strips divided into twelfths can help the student see the small difference. The denominator in the answer remains 12 because the pieces still have that size.
If a student writes 3/4 − 2/3 = 1/1, ask which line first changed the fractions. Subtracting numerator and denominator separately does not represent the difference between the two amounts. An estimate would show that the answer cannot be a whole. The fractions are both between one-half and one, and close to each other. Show the equivalent fractions, then retry a new example such as 5/6 − 3/4 = 10/12 − 9/12 = 1/12. Explain why a different pair gave the same difference here.
In a signed example, calculate −5/6 + 1/4. Use −10/12 + 3/12 = −7/12. The answer should stay negative because 5/6 has a greater magnitude than 1/4. Show the negative sign through the equivalent fraction and check that you moved upward from −5/6 when adding a positive quarter. This sign check would catch an answer of positive 7/12 even if the denominator was correct.
Distinguish multiplication, division and simplification
For multiplication, 3/5 × 10/9 = 30/45 = 2/3. You can also simplify the factors before multiplying if you divide a numerator and denominator by common factors within the product. Explain what is being divided by the same number. The ability to simplify a product does not mean that you can cancel terms across a sum. For example, (6 + 4)/2 = 10/2 = 5. The whole numerator is divided by 2. If you split it, use 6/2 + 4/2 = 3 + 2.
For division, 3/5 ÷ 2/5 asks how many groups of size 2/5 are in 3/5. The answer is 1½. The usual procedure multiplies 3/5 by the reciprocal 5/2, giving 3/2. Check by multiplying 3/2 by 2/5 to return 3/5. If the student flips both fractions or flips the first fraction, compare that result to the grouping interpretation. It gives a reason for using the reciprocal of the second fraction.
Now calculate −2/3 ÷ 4/9. Write −2/3 × 9/4 = −18/12 = −3/2. Check the sign from the operands and the size from the units of the question. The divisor 4/9 is positive and smaller than one. Dividing this negative number by it keeps the sign negative and increases its magnitude. Multiplying −3/2 by 4/9 gives −2/3, which verifies the original division.
Check a mixed calculation in stages
Consider 1/2 − 3/4 × (−2/3). The product comes first and equals −1/2. The expression becomes 1/2 − (−1/2), which equals 1. If you instead subtract 3/4 first, you are evaluating a different expression. If you lose the negative sign in the product, your final answer may become 0. The two incorrect answers point to different lines and different skills to practise.
A parent can ask the child to mark the step that uses the order of operations, then the step that uses signed subtraction. Give one variation with brackets, such as (1/2 − 3/4) × (−2/3). The value inside brackets is −1/4, and the final product is 1/6. Compare the answers and have your child explain why the expressions differ. This is useful error repair because the numbers are familiar and the change in structure is clear.
Previous section · Contents · Next section
Show your reasoning in algebra
Algebra gives the student a compact way to express what changes, what stays the same and what value would make a statement true. The first question is usually what the letter means. Choose a definition that matches the problem, such as “Let t be the number of tickets” or “Let h be the height in centimetres.” Then refer to that definition when interpreting the answer. A clear definition helps the reader see what is multiplied or added.
Combine like terms by keeping the unit of the term
In 7x − 3x + 5, the first two terms are both multiples of x. Their difference is 4x, so the simplified expression is 4x + 5. The constant 5 stays as a constant. To check, choose x = 2. The original expression gives 14 − 6 + 5 = 13 and the simplified expression gives 8 + 5 = 13. Matching at a value can catch a mistake. The reason the expressions are equal for every x is that the multiples of x combine to leave 4x.
Consider 2a + 3b − 5a + b. Group the a terms and the b terms. The a terms give −3a. The b terms give 4b. The result is −3a + 4b. A student who writes a single term may need to explain why a and b can represent different quantities. Try a = 1 and b = 3 to check the two expressions. The original gives 2 + 9 − 5 + 3 = 9. The simplified expression gives −3 + 12 = 9.
A sign belongs with its term. In 5p − 2q − 8p + 6q, moving terms into groups means carrying −8p and −2q with their signs. The result is −3p + 4q. If the student’s first error appears when they rewrite terms in a new order, practise crossing or underlining a signed term as a whole. The next time, ask them to state the coefficient of the term before moving it. This turns a vague sign concern into a repeatable step.
Expand by multiplying every term in the brackets
In 3(x − 4), multiply 3 by x and by −4. The result is 3x − 12. If a student writes 3x − 4, set x = 5. The original value is 3(5 − 4) = 3. The incorrect version gives 15 − 4 = 11. The correct version gives 15 − 12 = 3. Explain the structure by drawing three identical groups, each containing an x and a subtraction of 4.
For −2(3y − 5), multiply −2 by 3y to get −6y and by −5 to get +10. The result is −6y + 10. A short check at y = 0 shows the constant must be 10 because the original becomes −2(−5). Then try y = 2 and compare values of the whole expression. A check at zero is handy when looking for a constant error. Use another value to inspect the effect of the variable term too.
Reverse the operation to factorise. In 8k − 12, both terms have a factor of 4. Write 4(2k − 3), then expand to check it returns the original expression. If a student writes 4(2k − 12), ask what the last term becomes after multiplying by 4. If they write 4(2k + 3), ask which sign the original constant had. Going back through the inverse operation provides a dependable check for both the magnitude and sign.
Solve equations using the same operation on both sides
Take 5x − 7 = 18. Add 7 to both sides to get 5x = 25. Divide both sides by 5 and get x = 5. Substitute 5 in the original equation. The left is 25 − 7 = 18, which equals the right. An abbreviated instruction such as “move the seven” can become confusing when different operations appear. Explain the operation on both sides so the student knows why the solution is preserved.
Now solve 4x + 3 = 2x + 15. Subtract 2x from both sides to get 2x + 3 = 15. Subtract 3 from both sides to get 2x = 12. Divide both sides by 2 and get x = 6. In the original equation, the left is 27 and the right is 27. The check matters because some incorrect values can make one of the intermediate equations true after an earlier copying error. Using the original equation tests the result against the task.
Consider 2(3x − 1) = 16. You could divide both sides by 2 to get 3x − 1 = 8. Then add 1 and divide by 3 to obtain x = 3. You could also expand the left to 6x − 2 and then solve. Compare both methods and ask why they give the same value. A student who understands the operation can choose which approach uses fewer steps in a particular problem.
Clear fractions without dropping any term
Solve x/3 + 1/2 = 7/6. Multiplying both sides by 6 gives 2x + 3 = 7. Subtract 3 and get 2x = 4, then divide by 2 to obtain x = 2. Check that 2/3 + 1/2 = 4/6 + 3/6 = 7/6. Every term on both sides was multiplied by 6. Underline each term before multiplying if it helps you keep track.
A different example is (x − 2)/4 = 3/8. Multiplying by 8 gives 2(x − 2) = 3. Divide both sides by 2 to get x − 2 = 3/2. Add 2 and obtain x = 7/2. Substitute it back. The numerator becomes 3/2 and division by 4 produces 3/8. The brackets in the intermediate line preserve the fact that the denominator applied to the whole numerator. A student who writes 2x − 2 has lost that grouping and can repair it using the expansion check.
If the equation has more than one possible solution method, ask the child to use the method that keeps the relationships clearest for them. A student comfortable with equivalent fractions can solve for the fractional expression first. Another might multiply both sides by a common multiple of the denominators. When those methods are valid, the original equation has the same solution. During assessment, follow any instruction requiring a particular method or form of working.
Previous section · Contents · Next section
Check units and word problems
The problem statement tells you which quantity the answer should describe. A short label can prevent a correct number from answering the wrong question. Read the wording, identify the unit and decide when conversions should happen. Write a sentence at the end if the context makes the meaning or unit important. The student’s check begins with the original question.
Convert the relevant measures into one unit
A rectangular mat measures 1.2 m by 75 cm. If the question asks for its area in square metres, convert 75 cm to 0.75 m before multiplying. The area is 1.2 × 0.75 = 0.90 m². If the student instead multiplies 1.2 by 75 and writes 90 m², the first error is multiplying lengths expressed in different units without conversion. An estimate makes the discrepancy visible. The mat is a little longer than one metre and narrower than one metre, so its area should be close to one square metre.
The same area in square centimetres uses 120 cm × 75 cm = 9,000 cm². One metre is 100 cm, while one square metre is 100 cm × 100 cm = 10,000 cm². Draw a square if the student tries to multiply the area by 100 only. Each side has been converted. The same principle applies to volume, where three length dimensions contribute to the conversion. Use the question and the teacher’s conventions to decide which unit to report.
Compare perimeter and area in the same example. The perimeter is 2(1.2 + 0.75) = 3.9 m. The area is 0.90 m². If a child responds to “length of edging” with square metres, they may have chosen the area procedure because they recognised a rectangle. Ask what the answer describes. Edging follows the outside length. Covering the mat concerns an amount of surface. Sketch one or both to match the operation to the measurement.
Check which quantity a percentage describes
Suppose a class originally planned to print 80 cards and prints 20% more. Twenty percent of 80 is 16, so the new total is 96. If the task asks for the percentage reduction that would return 96 to 80, the difference remains 16 but the base changes. The reduction is 16/96, or one sixth, about 16.7%. The meanings of “more” and “reduction” both depend on the quantity used for comparison.
A student may also mistake an increase of six percentage points for a relative increase of six percent. If a proportion changes from 40% to 46%, the difference is six percentage points. Compared with 40%, the relative increase is 6/40 = 15%. Ask which comparison the question requires and whether the denominator represents a group size or the original percentage. Use a sentence that names the starting point before writing the number.
In an assessment or worksheet, write the base beside the calculation. For an original group of 60 and a later reading of 45, the difference is 15. The reduction compared with 60 is 25%. The increase needed to return from 45 to 60 is 15/45, or about 33.3%. Checking the direction and the original quantity gives the student a reason why the percentages differ even when the absolute change matches.
Distinguish part-to-part ratios from fractions of the whole
Suppose a craft group has red and blue cards in the ratio 3 to 5. The whole collection consists of eight equal ratio parts. If the total is 64 cards, one part represents eight cards, giving 24 red and 40 blue. Check both conditions. The cards add to 64, and the ratio 24 to 40 simplifies to 3 to 5. If the student calculates 3/5 of 64 to find the red cards, underline what the 5 means. It counts blue parts. The whole collection has eight parts.
Now suppose the task gives 40 blue cards and the same ratio. The 40 corresponds to the five blue parts. One part is eight and there are 24 red cards. The proportion of red cards in the whole is 24/64 = 3/8. Ask the student to label the quantities before dividing. Similar numbers can refer to a whole, to one colour or to one ratio part. A small diagram can help the child keep those meanings separate.
A ratio can also involve measures in different units. A ribbon of 60 cm and a ribbon of 1.5 m have lengths in the ratio 60 to 150 after conversion to centimetres, which simplifies to 2 to 5. If the task asks for the ratio of the longer length to the shorter length, the answer is 5 to 2. The order and common unit both matter. Have your child read the ratio back into the original sentence to check which measure was named first.
Read what belongs together in the story
Imagine an activity fee of $7 per participant plus a one-time $12 booking fee. The total for p people is 7p + 12. If the total is $68, subtract the booking fee to get 7p = 56 and divide to get p = 8. Check that eight participants cost $56 in per-person fees and the booking brings the total to $68. A common error is writing p(7 + 12), as though the booking fee were charged to everyone.
Now imagine each participant pays a $7 activity fee and a $12 materials charge. The expression would be p(7 + 12) = 19p. Ask the student to read the charges and circle what is paid once. Then explain the difference between the two equations before solving. A short sketch of one booking charge beside repeated participant charges can clarify the setup. The working should show why the choice of brackets changes.
If an algebraic solution gives a non-whole number where the problem asks for people, pause to check the setup. Check the data, wording and any assumptions. The problem might ask for a maximum number that fits a budget, in which case an integer and an inequality may matter, or it may have inconsistent data under your interpretation. Explain what the number would mean before rounding. A decimal answer often signals that the student has more context to read.
Check the result with an estimate or a different representation
If the question asks for a distance and the result is 0.06 m, convert it mentally to 6 cm to see whether it fits the object described. If a $56 total is split among eight pupils, an answer of $70 each should be caught before the calculations are reviewed. Use rough magnitude and the units. Then check whether the precise answer fits the original conditions. This catches mistakes in the final interpretation as well as in computation.
An estimate can be especially useful with fractions or percentages. A discount of 12% on an $83 item is slightly under $10 because 12% of $80 is $9.60 and increasing the base a little gives $9.96. The resulting price is $73.04. If the student obtains $9.96 when the task asks what they pay, ask which quantity that number describes. The figures are useful once the answer is linked to discount or final cost.
For a question that specifies rounding, keep the exact working until the requested step where practical. Suppose three friends split $10 equally and the question asks for the theoretical share before rounding to cents. The exact share is $10/3 for each. A rounded amount of $3.33 is suitable if the question asks for the nearest cent. Checking three rounded amounts gives $9.99 because a cent was lost through rounding. If the story asks how to distribute the actual ten dollars in cents, the group needs to account for that last cent, for example with two shares of $3.33 and one of $3.34. Similar numbers serve different purposes depending on the wording. Read the final instruction before deciding which value to present.
Previous section · Contents · Next section
Correct the error and test it again
When your child gets a marked assignment back, choose a question they can explain to you. Keep the original working and the teacher’s comment together. Ask the student to show the first line where the problem starts. If the teacher has provided a method or correction, read it and compare it with the student’s thinking. Then close the worked answer and try a new question that shares the same structure.
Tell apart the errors that look similar
Two incorrect answers can come from different causes. In a question such as 6 − 3(−2), one student may multiply 3 by −2 correctly and forget they are subtracting the product. Another may subtract 3 from 6 first and multiply the result by −2. The first student should practise carrying a signed product back into a subtraction. The second should practise selecting the next operation based on the grouping. Both need a new example, but the first line to repair is different.
A unit error can also happen at different stages. A student who multiplies metres by centimetres needs to convert before combining lengths. A student who converts both lengths correctly but labels the area in metres needs to understand what the final measure represents. Ask which of those happened. Next time, one student may need a conversion line near the beginning. The other might need a final check that identifies which quantity is being reported.
An algebra error can occur when building the equation, expanding it or solving it. Ask the child to point to the unknown and the equation for the story. Check that the equation makes sense before checking operations. Then test the result against the context. A sensible answer could still hide an incorrect intermediate line. A confusing final answer is easier to investigate when the working keeps the model and the calculation distinct.
Test whether you can reproduce a worked solution
A student may see a class correction and recognise every step. To find out what they can reproduce, cover it and ask them to explain just the first decision. For example, in 3(x + 2) = 24 they could divide by 3 first or expand and solve. Ask the student to finish using their chosen method. If they can reproduce the result only after seeing the first line again, practise choosing the first line before doing another full question.
When checking a worked answer from a friend or a textbook, read it as someone else’s method. Match the definition of the unknown to your own. Compare the order of the steps and identify where the two methods diverge. One solution may use drawings and another may use an equation. Check that each describes the same conditions. If you copied a line that does not follow your own setup, ask why it belongs in the other solution and go back to the original question.
A partial answer can be useful during review. Suppose the student defined a variable and set up a valid equation but stopped before solving it. Keep that first part and practise the missing operation. If the student had no valid setup, an exercise on solving prepared equations may leave the main difficulty untouched. Ask the child to explain which part they already control and which piece of working they want to get more reliable next time.
Build a short error record
Use one card or a small table for each recurring error. Write the original question, the first incorrect line and the corrected line. Add a short explanation in your own words. Then write one new practice question and solve it without looking at the correction. Record the date and whether you needed a hint. Three entries with a clear explanation can help more than a long file of corrected pages that the student never revisits.
For example, a child might record, “I wrote −3(2x − 4) = −6x − 12. I multiplied −3 by 4 instead of −4. The correction is −6x + 12. I checked at x = 0.” A few days later they can solve −4(3y − 2) and check whether they get −12y + 8. If the new example comes out correctly with no prompt, try a mixed example where the sign issue is one part of a longer calculation.
Use the same record for a correct answer with incomplete explanation. The entry might say, “I wrote x = 7 and gave no step showing why. Next time I will write the equation and the inverse operation on both sides.” Ask the teacher what amount of working applies to the task. The student can then check both the mathematical decision and the communication of that decision.
Practise a few contrasts before the next assignment
Choose prompts that differ by one feature. Here are three pairs to try without looking at the answers. Calculate −9 − 4 and −9 − (−4). Calculate 2/3 + 1/6 and 2/3 × 1/6. Expand 4(2m − 3) and −4(2m − 3). Write one sentence explaining what changed between the two prompts in each pair. A short contrast makes it harder to apply a memorised procedure to the wrong operation.
The signed-number answers are −13 and −5. The fractions are 5/6 and 1/9. The expansions are 8m − 12 and −8m + 12. Check one pair with a second representation. For the signed numbers, draw a number line. For the fractions, reason that adding a positive sixth increases two thirds, while multiplying by a positive sixth makes two thirds smaller. For the expressions, substitute m = 0 and compare the constant in each result.
For a later check, try 4 − (−8), 7/10 − 1/4 and −3(4x + 5). The answers are 12, 9/20 and −12x − 15. If a student gets only one wrong, work on how they identified the operation in that question before adding more practice. Ask them to circle the sign, denominator or grouped expression that needed attention. The next prompt should test the same feature with different numbers.
Revisit after a delay
A student may recognise a problem immediately after seeing its correction. Wait a day or two and give a new item with the same mathematical structure. Ask the child to explain the first decision before checking the answer. If they still need a prompt, record which prompt was useful. A hint such as “What does the denominator apply to?” is more specific than supplying the next operation. The aim is to make that question one the student can ask themselves.
A few days later, put the repaired skill inside a different problem. For example, include negative multiplication inside an equation or include conversion in a table comparing areas. If the child can perform the skill on an isolated question but skips it in the longer task, ask what clue should trigger it. Highlight the feature in the question text that indicates a unit change or a bracketed quantity. This gives the student a way to recognise the problem before choosing an operation.
If the child is already applying the repair independently, give them a more unfamiliar form or let them explain it to someone else. Ask how they would check that a proposed line is equivalent to the original. Substitution can reveal many incorrect expressions. Working through the mathematical structure explains why correct equivalent expressions always agree. The child can learn both ways to check without treating every practice problem as a speed test.
Try one complete repair with two checks
A student is asked to solve 3(x − 2) + 4 = 13 and writes 3x − 2 + 4 = 13. The first error is expanding 3(x − 2) as 3x − 2. The multiplier applies to both terms in brackets, so the correct expansion is 3x − 6. The equation becomes 3x − 2 = 13. Add 2 to both sides and divide by 3, giving x = 5. The left side of the original equation is 3(5 − 2) + 4 = 9 + 4 = 13. The solution checks.
The expansion can be checked separately by substituting x = 0. The original factor gives 3(0 − 2) = −6. The incorrect expansion gives −2. That check identifies why the first line needs to be repaired even before the equation is solved. Next, try 2(2y − 3) + 5 = 15. The correct expansion and simplification give 4y − 1 = 15, so y = 4. In the original, 2(8 − 3) + 5 = 15. A later attempt might use a negative multiplier to see whether the repaired habit survives a change of sign.
If the child correctly solves the second equation but cannot explain why the first expansion failed, ask them to write each product before simplifying. Briefly multiplying 2 by both 2y and −3 makes the point visible. On the delayed attempt, remove the prompt and see if the child still looks at both terms. Keep the evidence of how much prompting was needed. This lets the student distinguish understanding the correction from using it independently.
Use teacher feedback to choose the next action
A short message to the teacher can mention the subject and task, the recurring first error and one new attempt. For example, “In my last two equations I multiplied the first term by the common denominator but missed the other terms. In the new question I marked all the terms before multiplying. Could you check whether this is the working you want us to show?” This gives the teacher a way to address both the concept and the expected presentation.
If the assessment instructions say that a calculator is permitted for some work or require an exact value, follow that task’s directions. Use a calculator result as one check only when allowed, and keep the relevant working. Check the class’s current topic list and scope before making a large practice plan. School assessment pages illustrate that tasks and formats are published for particular groups and years. Your child’s school and teacher set the relevant tasks for the 2027 class. Example of school assessment plans by Mathematics level and year group · Example of a school Secondary 1 assessment information page.
Give the student a part they can do independently
A parent can read the question aloud if the student is doing ordinary revision and asks for help, or ask where the first uncertain line appears. Let the child write the explanation and perform the check. If they are practising for a school task that has particular conditions, ask the teacher what support is appropriate. The student’s independent attempt gives the most direct information about whether the method is now available to them.
End the review by choosing a skill and a check for the next lesson. For example, “I will carry a negative result in brackets when it is being subtracted,” or “I will write both lengths in centimetres before calculating area.” Choose one real question to check afterward and keep the student’s earlier work beside it. When the same skill appears in a new form, the family can see where the student made a different decision and whether it improved the result.
Test the correction on a question that looks different
If a pupil misses the second multiplication in an expression with brackets, give them a new question that also requires expanding but asks for the value of the expression after substitution. For example, simplify 2(3m − 4) + 5 and then find its value when m = 2. The expansion gives 6m − 8 + 5, which becomes 6m − 3. At m = 2 the result is 9. Substitution into the original gives 2(6 − 4) + 5, also 9. Ask the pupil to explain which line proves the expansion rule was used and which line serves as a check at a single value.
If that work is accurate but the pupil repeats the same mistake next week in a longer equation, keep the equation and note the circumstances. The pupil may recognise the rule during focused practice and still miss it after several steps. In that case, agree on a quick cue to use whenever brackets appear. The guide to first school assessments and G3 subject reviews explains how to use several pieces of work when discussing progress with the school.
