Your child’s PSLE Posting Group helped determine where they entered secondary school and the level at which they started most subjects. The Singapore-Cambridge Secondary Education Certificate (SEC) shows the subjects they sat for, the level of each subject, and the grades they earned. If the results include G1, G2 and G3 together, read each subject and its level as one entry before working out any application score.
Start with the actual results, then check the admissions rules for the course and intake your child wants. Some routes use grade mapping when they calculate an aggregate score. In that case, an eligible subject grade can contribute a different value to the calculation while the original level and grade stay on the SEC. This guide walks you through both records, with fictional examples you can work through with your child.
- Look at the subject, G level and grade together. Each G level has its own grade scale.
- SEAB awards the SEC when a candidate reaches the published grade threshold in at least one subject.
- Grade mapping applies where the rules for a post-secondary route call for it.
- A mapping table gives a subject value. An aggregate uses the subject slots, eligibility conditions and other rules for a specific route.
- Keep a separate working sheet for each route, with the original result beside any mapped value.
- The first SEC examination is in 2027 and results are due in January 2028. Use official notices for the actual release and application dates.
Find your next subject decision
Start with the route closest to your question, or follow the chapters in order. The practical examples support a conversation with your child’s school.
1. Read the subject,
level and grade together
Chapters 1–2
2. Check certificate
eligibility separately
Chapters 3–4
3. Work through G2
to G1 and a two-step conversion
Chapters 5–6
4. See
how one grade can be used differently for another route
Chapters 7–8
5. Three small
checks before you trust a calculation
Chapters 9–11
Full chapter index · PSLE Posting Groups and school-choice guide
Chapter index
Read the subject, level and grade together · Chapters 1–2
Check certificate eligibility separately · Chapters 3–4
Work through G2 to G1 and a two-step conversion · Chapters 5–6
See how one grade can be used differently for another route · Chapters 7–8
Three small checks before you trust a calculation · Chapters 9–11
CHAPTER 1 OF 11 · Read the subject, level and grade together
1. Read the subject, level and grade together
Imagine your child’s results include English Language at G3 with a B4, Mathematics at G2 with a 2, and Computing at G1 with a B. These are fictional results for three different subjects. When you read them aloud, include the level every time. “Mathematics, G2, grade 2” communicates more than “Maths, 2”. Another person who hears only the number might assume it is part of a G3 grade or an aggregate.
The G level describes the subject syllabus and examination level the student took. The grade describes how the student performed at that level. A family looking for a single level across all subjects may be surprised by a mixed record. Full Subject-Based Banding allows a student to study different subjects at different levels, and the SEC reflects the subjects and levels taken. SEAB overview of the SEC.
Keep the PSLE result separate when you are reading the SEC. The PSLE is a primary school examination, and Posting Groups relate to entry into secondary school. By the time your child sits the SEC, some subject levels may have changed, while others may have stayed the same. Read what your child actually sat for. If you are still choosing secondary schools, start with the earlier decision and come back to this guide when you are planning later options. PSLE Posting Groups and secondary school choice.
A useful family exercise is to make a short list from the results slip. Keep the full subject title, including any component included in its name. For instance, if the result says Humanities with Social Studies and Geography, write the registered title as shown. This makes it easier to check whether a course accepts that paper as a relevant subject. It also helps you avoid putting the same combined subject into two slots by treating its components as independent results.
Ask your child which result tells a story they are proud of. It might be a subject where their feedback improved over the year, a subject they persisted with, or one they would like to keep studying. That conversation gives you information that the grades alone cannot supply. It also gives your child a role before the family moves into forms, calculators and dates.
CHAPTER 2 OF 11 · Read the subject, level and grade together
2. Know the three SEC grade scales
The G1 grade scale runs from A to E. G2 uses the numbers 1 through 6. G3 uses A1, A2, B3, B4, C5, C6, D7, E8 and 9. These are the grade labels SEAB sets out for the three subject levels. A1 belongs to the G3 scale, while A is a G1 grade. Grade 2 on a G2 subject belongs to the G2 scale, while A2 is a G3 grade.
| Subject level | Grade labels, from the highest down | Threshold for that subject to qualify a candidate for the SEC |
|---|---|---|
| G1 | A, B, C, D, E | D |
| G2 | 1, 2, 3, 4, 5, 6 | 5 |
| G3 | A1, A2, B3, B4, C5, C6, D7, E8, 9 | E8 |
A table of grade labels does not show the marks on each paper. If your child gets G3 C5, a family cannot use this guide to reconstruct what they scored on a particular component. Where a grade seems unexpected, first check the original record and then ask the school about the official options and timescales. Keep screenshots of a school test, prelim score and national examination result in separate places so you can discuss each one clearly.
The grades also follow a different system from Primary 6 Achievement Levels. For instance, it would be a mistake to treat a PSLE AL2 as a G2 grade 2. The two labels come from different examinations, taken at different stages and used for different decisions. You can use primary school progress to tell the story of how your child developed in a subject. Use the SEC entry when an application asks for the national secondary examination result.
One way to check understanding is to ask a student to explain their record to someone who has never seen Full Subject-Based Banding. They might say, “I took English at G3 and Mathematics at G2. This grade is the result I received for the syllabus I actually sat.” It is often easier to remember that sentence than to learn a conversion chart before there is a real decision to make.
CHAPTER 3 OF 11 · Check certificate eligibility separately
3. Check certificate eligibility separately
SEAB’s published rule provides three ways for a subject result to meet the certificate threshold. A candidate meets it with E8 or better in a G3 subject, 5 or better in a G2 subject, or D or better in a G1 subject. One qualifying subject is sufficient for the award criterion. SEAB says the SEC will be issued as one examination certificate reflecting subjects taken across levels. SEAB’s results release and examination certificate guidance.
Take a fictional example. Amir earns G1 D in Mathematics, G2 6 in Science and G3 9 in English. His G1 Mathematics grade meets the certificate threshold, because D is the published boundary at G1. Leave his Science and English entries exactly as reported when making the family’s working copy. If he is considering a course with a specified grade or level for English, check that condition in its own right.
Now consider Leena, whose fictional selected results include G3 E8 in English, G2 4 in Mathematics and G2 6 in another subject. Her English and Mathematics results each meet the certificate threshold at their respective levels. The question of whether a target course accepts those results still depends on that course’s criteria. Some routes require several subjects in defined slots, may require a particular level, and may set a minimum grade in a specific subject.
Using the certificate threshold as an admissions shortcut can mislead a family in either direction. A student may have the certificate and still need to research which programmes their results fit. A student who is disappointed with one paper should check each viable route before drawing a conclusion from that result. A course may count a different subject, while another course may have a subject condition that genuinely rules out that option for the intake.
If your child’s result appears to contain an unexpected symbol, an entry you cannot reconcile with the school’s records, or a discrepancy in their particulars, ask the school for the official interpretation. The certificate threshold table does not decode every type of entry on a results document. Copy the exact entry when you ask for clarification to avoid a misunderstanding about the subject or syllabus level.
CHAPTER 4 OF 11 · Check certificate eligibility separately
4. Work through G3 to G2 grade mapping
SEAB publishes a mapping from G3 grades to G2 values for progression calculations where the admissions rules call for it. The published table groups G3 A1, A2 and B3 as G2 value 1. G3 B4, C5 and C6 map to 2. The remaining listed mappings are D7 to 3, E8 to 4 and grade 9 to 5. Use the named table rather than reading the digit in a grade label as its mapped value.
| Original G3 grade | G2 value in an eligible mapped calculation |
|---|---|
| A1, A2 or B3 | 1 |
| B4, C5 or C6 | 2 |
| D7 | 3 |
| E8 | 4 |
| 9 | 5 |
For example, Hana’s G3 English Language result is B3. Where a route counts that grade at G2, write “G3 B3” in the original-result column and “1” in the calculation column. Keep both entries. If another route uses the subject at G3, take the original grade and apply the rules for that route. Carrying the 1 across simply because it gave a lower number for the first route would change the calculation incorrectly.
Try a second pair of examples. Kai has G3 Science C6 and G3 Design and Technology D7. If each subject were mapped to G2 in a permitted calculation, their values would be 2 and 3. The original C6 and D7 show different performance grades. The resulting 2 and 3 are values used for that calculation. An application route may accept one, both or neither in a particular slot depending on its official relevant-subject list.
The existence of a row for G3 grade 9 can surprise families because the certificate boundary for that level is E8. The mapping table and award criterion ask different questions. In the mapping table, grade 9 corresponds to 5 when the rules use the conversion. For the SEC award criterion, test the original grade at the original level. For a course application, first check the official rules governing whether the original result can count and whether any separate subject requirement applies. SEAB grade mapping and SEC award criteria.
CHAPTER 5 OF 11 · Work through G2 to G1 and a two-step conversion
5. Work through G2 to G1 and a two-step conversion
SEAB also publishes a G2-to-G1 mapping for progression calculations that require it. A G2 grade of 1, 2 or 3 maps to A. Grade 4 maps to B, 5 to C, and 6 to D. SEAB specifies a two-step conversion when a G3 result is used at G1 for progression. Map the G3 grade to G2 first, and then use the G2 value in the second table.
| Original or first-stage G2 value | G1 value in an eligible mapped calculation |
|---|---|
| 1, 2 or 3 | A |
| 4 | B |
| 5 | C |
| 6 | D |
Here is a two-step example. Suppose Ravi’s subject result is G3 E8. The first table gives G2 value 4. The second table gives G1 value B. On the working sheet, write the route requiring the conversion and keep the sequence as G3 E8 → G2 4 → G1 B. The SEC entry remains G3 E8. You have two tables and a clear chain you can check later.
Consider a student who actually sat Mathematics at G2 and received grade 5. A calculation expressly using a G1 equivalent would map that grade to C. This time there is one step, because the original result is already G2. If you catch yourself converting a G1 B to G2 4 to fill a required G2 slot, pause and check the direction. The published tables described here convert from a more demanding level to the applicable lower level when called for. They do not provide a reverse conversion.
That direction explains another useful limit. If several G3 grades map to the same G2 value, seeing that value in someone’s calculations cannot tell you their original G3 result. A G2 mapped value of 1 can arise from G3 A1, A2 or B3. A G1 value can hide even more detail after two steps. Always return to the original result before planning a different route. SEAB progression grade mapping.
CHAPTER 6 OF 11 · Work through G2 to G1 and a two-step conversion
6. Calculate an aggregate one subject slot at a time
An aggregate is the result of applying a route’s scoring rule to a defined set of subjects. When a child has seven examination grades, the family usually wants to add the most favourable ones. Start by reading which slots the particular route calls for. A route might require English, Mathematics and a specified number of other acceptable subjects. Some slots may be reserved for subjects relevant to a course, even if a different result looks stronger.
A simple working sheet has a row for each slot. Add the subject name, registered level, original grade, whether mapping is allowed at that slot, and the value used. Leave a blank where you are unsure. Put the rule and intake at the top, such as “Polytechnic Foundation Programme, intake to confirm”. Add the publication date of the official criteria you relied on. Later, if the exercise rules change, the family can see which calculations to revisit.
Here is a fictional five-slot arithmetic example using English, Mathematics and three other subjects. It illustrates the kind of G2-basis calculation SEAB describes for an ELMAB3 aggregate. Suppose the route accepts the following combination for the purpose of the example, with no separate bonus or course-specific adjustment assumed.
| Illustrative slot | Original result | G2-basis value |
|---|---|---|
| English | G3 B3 | 1 |
| Mathematics | G2 2 | 2 |
| Other subject 1, Science | G3 C5 | 2 |
| Other subject 2, Humanities | G2 3 | 3 |
| Other subject 3, Chinese Language | G2 4 | 4 |
The illustrative total is 1 + 2 + 2 + 3 + 4 = 12. Notice the two G3 grades were mapped in this example and the existing G2 grades stayed at their recorded values. Suppose the same student also had G1 A in Computing. That grade describes what the student earned. It cannot simply be added as a 1 or used to replace G2 Chinese Language in this calculation. A route may have a different way of recognising the subject. Look at its official entry rules rather than forcing the grade into an incompatible slot.
A family using this example on results day should still check the actual intake’s requirements for the course or cluster, any minimum subject grades, the subject lists, and whether an applicable adjustment changes the final score. Arithmetic comes after those checks. A total of 12 illustrates the calculation without predicting the eligibility or posting result of a particular child. SEAB’s worked ELMAB3 mapping example.
CHAPTER 7 OF 11 · See how one grade can be used differently for another route
7. See how one grade can be used differently for another route
MOE has announced a change to Polytechnic Year 1 admission from the 2028 intake. The last B slot in ELR2B2 can use a G2 subject in the revised calculation. The other four subjects remain at G3. If that final B slot uses a G3 subject, the grade is mapped to G2 for that slot. The subject still has to qualify for the slot under the route’s rules. MOE’s announcement on Polytechnic Year 1 admission.
For a fictional arithmetic example, suppose four eligible G3 slots have values of 4 for English, 3 and 5 for two relevant subjects, and 4 for the first best-subject slot. These contribute 16. Assume the official rules let the student use a G2 grade 2 in the final B slot. The working total becomes 16 + 2 = 18. If the student instead has an eligible G3 C6 for the final B slot and it is used for this calculation, the G2 mapping also gives 2. The working total in that variation is also 18.
Now move that same G3 C6 result to one of the four slots counted at G3. You would need the G3 value under the rule for that slot. A 2 taken from the conversion would understate the points for that slot. Similarly, the existence of one eligible G2 slot does not turn all five slots into G2-basis entries. Read the rule from left to right and mark the basis of each slot before you add anything.
For real applications, eligibility and offers involve more than the sample sum. Course-specific requirements apply, and the admissions exercise may use net and gross aggregates differently. MOE has announced the Post-Secondary Admissions Exercise (PSE) from 2028. Confirm the official process for the year you are applying, and check the programme or course page rather than relying on a total from a past year or an unofficial calculator. MOE’s announcement on the Post-Secondary Admissions Exercise.
There is also a practical distinction between a minimum a student must meet and the score of the last person admitted in a previous round. The latter can help a family understand past competition where the intake publishes it. Applications, available places and preference patterns may be different in a later year. Children and parents can use that information to build a list of courses they would actually take if offered, then check what the official exercise says about ranking.
CHAPTER 8 OF 11 · See how one grade can be used differently for another route
8. Make a results-day record your child can use
SEAB states that SEC examination results will be released in January after the exam year. The first SEC examination is in 2027, so its results are due in January 2028. For a school candidate, read school communications and official releases for the actual date, collection process and next steps. Put application opening and closing dates into a calendar once the official exercise documents publish them. SEAB’s SEC results information.
Start with a paper or digital copy the student and family can find again. Keep the official result in a secure place. Make a separate worksheet for calculations, with columns for source, subject name, level and grade. For each application, copy the subjects used into a second section before entering any mapped values. This means a new course can be considered from scratch without undoing the first course’s calculations.
When time is tight, pick two checks for each serious option. First, ask whether the course has a minimum grade or level for a named subject. Second, identify where every counted subject fits in the aggregate. A student might ask an education and career guidance counsellor, “Can we confirm which of my subjects meets the second relevant-subject slot for this course?” That is easier to answer precisely than “What can I get into with these points?”
Build in time for your child’s own reaction. A student who expected different grades may need an hour to think before they can discuss choices. It can help to agree that the first conversation is about checking the document and getting the dates, and the next one is about the shortlist. Where the family has questions about an unexpected entry or an official review of results, contact the school promptly about the procedure and deadline. Results day and the application timetable may move quickly.
Keep a short note when you speak to a teacher, school staff member or counsellor. Record what you asked, what the person confirmed and what still needs checking. If an answer applies to a particular course or intake, put that in the note. Later, if your child finds a different programme they want to consider, you can tell which parts of the earlier conversation transfer and which questions need a fresh answer.
CHAPTER 9 OF 11 · Three small checks before you trust a calculation
9. Three small checks before you trust a calculation
Ask the student to check the original grade against the official record while a parent checks the route’s subject requirements. Switch roles and repeat for one result. This catches common copying errors, especially where a G3 grade includes both a letter and a digit. If your child had G3 B4, a bare 4 could refer to the original grade’s digit or to a value entered in the wrong place. Preserve B4 in the official-result column and put the calculated value in a clearly marked cell.
Next, compare the number of rows with the number of slots. If the route asks for five, count five valid and distinct entries and check whether any special rules apply to them. If there is a corresponding course list, compare the exact subject title. Related titles, such as two different forms of Humanities, may appear similar on a family spreadsheet. The rule should tell you which titles qualify for a relevant-subject slot.
Finally, make the sum twice. For instance, the fictional five entries 4, 3, 5, 4 and 2 total 18. You can check mentally by grouping 4 + 4 as 8, then adding 3 + 5 as another 8 and the remaining 2. This catches a typo such as 4 being entered as 5. Then label the result as an illustrative working total or, if based on your actual application, with the correct official category and version of the rule you checked.
If some routes seem possible and others cannot yet be calculated, leave the missing information visible. A provisional total may help a conversation, but a blank says more than a guessed number where course eligibility is unresolved. For a family looking at three options, write the exact question still open for each. One course may need a check of the accepted Humanities paper, another may need a G3 language grade, and a third may have an intake rule yet to be published for that cohort.
CHAPTER 10 OF 11 · Three small checks before you trust a calculation
10. Recheck a course when your child changes their mind
Suppose Nur first considers a design course because they enjoyed making prototypes at school. After reading the course outline, they also want to compare it with a programme that spends more time on computing. Begin with two copies of the original results. On a fresh page for each course, write what the course covers, which subjects it asks for and where the requirements came from. If the admissions pages use the same aggregate abbreviation, check the relevant-subject lists for each course. A grade used in one calculation may occupy a different slot or be unavailable for the other.
Next, ask your child to explain one difference in the coursework they would be doing. They may prefer sketching ideas, making physical models or testing how a computer program behaves. A prospectus, course briefing or conversation with an education and career guidance counsellor can help them describe the daily work. The choice is easier to discuss once their interest has a concrete example and the family has checked whether the results fit the current requirements.
Finally, put the official application dates beside both options. If you still need to verify a subject title or a grade requirement, choose who will ask, whom they will contact and when they will follow up. Where the intake information is still forthcoming, record where to look for it. A short action list helps a student keep moving without entering a guess as a confirmed result.
CHAPTER 11 OF 11 · Three small checks before you trust a calculation
11. Questions parents and students ask
Does the SEC turn all my qualifications into one overall grade?
The SEC shows your individual examination subjects and their levels. A post-secondary route may calculate an aggregate from selected results for a particular purpose. You can have different working aggregates for different applications because the rules count different subjects or use grades at different levels.
If I entered through PG2, will every grade on my SEC be G2?
The SEC reflects the subject levels you sat for. PG2 is an entry Posting Group. If your actual SEC combination includes G1 or G3 subjects, read those subjects at the levels shown on the record. The school can clarify the relevant subject registration before the examinations.
Do I need passes in all subjects for the certificate to be awarded?
The published award criterion is at least one subject at the level’s threshold or better. The threshold is D at G1, 5 at G2 and E8 at G3. Course entry can require particular subjects, grades, levels or an aggregate in addition to the certificate.
Does my result become a different grade because it was mapped?
The official result remains the grade earned in the subject and level you took. The converted value belongs to the progression calculation that calls for it. Keep the original grade when you write a résumé, show your examination results or calculate an aggregate under a different rule.
Can two results that map to the same value have different uses?
Yes. For example, G3 B4 and G3 C6 both map to G2 value 2 in the published table. They remain different G3 grades, and another rule may use them as G3 grades or apply a specific minimum. Check the purpose for which you are reading the grade.
Does meeting a minimum point requirement guarantee a place?
A minimum rule tells you one part of eligibility. Admission also depends on other applicable criteria and on the exercise’s allocation process. Check that each high-priority course has a verified subject list and intake year. Then include an option you would be glad to study even if a more competitive choice is unavailable.
What can a Secondary 1 or Secondary 2 family do now?
Keep a current list of subject levels and revisit choices when your school issues subject combination information. Explore a few areas of study your child finds interesting and learn what each area asks students to do. Save formal aggregate calculations for the rules applicable to your child’s intake. Follow the PSLE Posting Groups series.
Contents · Previous chapter · Continue to the Posting Groups guide
Full SBB guides for earlier school years
Go back to the subject decisions and school routines that lead up to the SEC.
- PSLE Posting Group | Mixed Form Classes and the Secondary 1 Common Curriculum
- PSLE Posting Group | Your First Term Under Full Subject-Based Banding
- PSLE Posting Group | Humanities Subject Choices from Secondary 2 to SEC
- PSLE Posting Group | Choosing an Upper Secondary Subject Combination Under Full SBB
