Secondary 3 G3 Additional Mathematics vocabulary helps students understand what a question requires, choose a suitable method and explain why their working is valid. This guide brings together 100 useful words and mathematical terms, from factorise and discriminant to domain and stationary point. Each entry has a short explanation and an original example. For a student who can follow a demonstration but struggles to start independently, learning the language around the calculation can make the next step clearer.
Start with the terms appearing in your current school chapter, practise using them in complete mathematical statements, and check them again in unfamiliar questions. This is an eduKate teaching selection, not an official SEAB ranked or compulsory vocabulary list. The curriculum reference is the 2027 G3 Additional Mathematics syllabus, K341. School teaching sequences differ, so the calculus groups are clearly marked as a later-course preview when those topics have not yet been taught. A three-student tutorial can use the list to identify reading, reasoning and calculation difficulties separately.
- For: Secondary 3 students studying G3 Additional Mathematics and parents supporting them.
- Includes: exactly 100 numbered vocabulary entries in ten groups, with definitions and examples.
- Begin here: question commands, algebra structure, quadratics and the current school topic.
- Learn carefully: signs, domains, exact values, valid transformations and the difference between an answer and a proof.
- Practise: worked examples, a short diagnostic, a four-week study plan and explanations in a possible 3-pax lesson.
- Check: your school’s assessment scope and the syllabus for your actual examination year.
SEAB’s 2027 G3 subject index lists Additional Mathematics as K341 and Mathematics as K310. They are separate subjects. The K341 syllabus assumes G3 Mathematics knowledge and organises the course into algebra, geometry and trigonometry, and calculus. Its assessment includes mathematical reasoning and communication alongside procedures. That makes vocabulary useful when a student must explain a condition, interpret a result or justify a conclusion.
The SEC begins in 2027, with subjects taken at their respective G1, G2 or G3 levels. G3 describes the subject level; a student may take other subjects at different levels. Under the usual progression from Secondary 3 to Secondary 4, a student in Secondary 3 in 2026 would ordinarily sit the SEC in 2027, while one in Secondary 3 in 2027 would ordinarily sit it in 2028. The 2027 document linked here should not be treated as confirmation of a later examination year’s requirements.
For everyday revision, work from the school’s current chapter and assessment notice. Ask which ideas have been taught, which are being consolidated and which will come later. A Secondary 3 school test has its own stated scope. It is unhelpful to judge a student’s present understanding by a chapter that the class has not reached.
CHAPTER 2 OF 20 · Understand the course
2. How to turn a definition into a usable skill
Give each term four checks: explain it, recognise it, use it and check its conditions. With factorise, for example, explain that the expression must be written as a product. Recognise that x² − 9 has a difference-of-squares structure. Use it to obtain (x − 3)(x + 3). Finally, expand your answer to confirm that the original expression returns.
A vocabulary notebook can have three short columns: the term, one correct example and one warning. For logarithm, the warning might be “the argument must be positive in real-number work”. For stationary point, it might be “check the point’s nature; a zero derivative alone does not establish a maximum”. These warnings connect the word to a decision you will actually make.
Read mathematical statements aloud when a symbol is confusing. “x is greater than two” sounds different from “x equals two”. “For every real x” makes a stronger claim than “for x equal to three”. Keeping those differences visible is often the first step towards cleaner working.
Before calculating, identify the instruction. Two questions can contain the same expression while asking for different outcomes. These commands describe the work to perform and the form in which the answer should be presented.
- Simplify. Rewrite an expression in an equivalent, clearer form. Example: 3x + 2x − 4 simplifies to 5x − 4. There is no equation here to solve.
- Expand. Remove brackets by multiplying each required term. Example: (x + 2)(x − 3) expands to x² − x − 6. Check both middle products.
- Factorise. Express something as a product of factors. Example: x² − 5x + 6 = (x − 2)(x − 3). Expanding the product checks the result.
- Solve. Find all values satisfying the stated equation or inequality. Example: x² = 16 has the real solutions x = 4 and x = −4.
- Evaluate. Work out the value of an expression for the given information. Example: if x = −2, then 3x² + 1 = 13.
- Show that. Supply valid working leading to the stated conclusion. Example: to show that (x + 1)² − (x − 1)² = 4x, expand and collect terms.
- Hence. Use an earlier result to make the next step. Example: after factorising x² − 5x + 6, hence solve x² − 5x + 6 = 0.
- Prove. Establish a statement through justified reasoning for every case claimed. Example: n(n + 1) is even for integer n because one of two consecutive integers is even.
- Deduce. Reach a conclusion from information already established. Example: from (x − 2)² ≥ 0, deduce that x² − 4x + 7 ≥ 3.
- Exact value. A value given without rounding. Example: the positive solution of x² = 5 is √5 exactly; 2.236 is an approximation.
These terms help you describe what you are changing. When you can point to the coefficient, constant and degree, you can discuss an algebra error precisely instead of saying that the whole line looks wrong.
- Term. A part of an algebraic sum, including its sign. In 4x² − 3x + 7, the terms are 4x², −3x and 7.
- Coefficient. The number multiplying a specified variable term. In −5x² + 2x, the coefficient of x² is −5, including the negative sign.
- Constant. A quantity that stays fixed in the calculation. In y = 3x + 8, the constant term is 8; it contains no x.
- Variable. A symbol representing a value that may change or be unknown. In A = πr², changing the radius r changes the area A.
- Parameter. A value treated as fixed within a particular case, but allowed to vary between cases. In y = x² + k, k determines the vertical position.
- Expression. A mathematical combination without an assertion of equality. Example: 2x² − 7x + 3 is an expression; it can be simplified or evaluated.
- Equation. A statement that two expressions are equal. Example: 2x + 5 = 11 is true when x = 3.
- Identity. An equality true for every value in its stated domain. Example: (x + 2)² = x² + 4x + 4 for every real x.
- Polynomial. A sum of terms with non-negative integer powers of the variable. Example: 2x³ − x + 4 is a polynomial; 1/x is not.
- Degree. The highest power with a non-zero coefficient in a non-zero polynomial in one variable. Example: 7x⁴ − 2x² + 1 has degree four.
A quadratic question may ask about values, roots, graphs or intervals. Read which of these is required. Keep the value of a function separate from the x-coordinate where that value occurs.
- Quadratic function. A function of the form ax² + bx + c, where a ≠ 0. Example: f(x) = 2x² − 3x + 1.
- Root. A value making an equation of the form f(x) = 0 true. Example: the roots of x² − 9 = 0 are −3 and 3.
- Discriminant. The quantity b² − 4ac for ax² + bx + c = 0. Example: x² − 6x + 9 = 0 has discriminant zero and equal roots.
- Completing the square. Rewriting a quadratic using a squared bracket. Example: x² + 6x + 11 = (x + 3)² + 2.
- Vertex. The turning point of a parabola. Example: y = (x − 4)² + 1 has vertex (4, 1).
- Axis of symmetry. A line dividing a graph into reflected halves. For y = (x − 4)² + 1, that line is x = 4.
- Maximum. The greatest value within the specified domain or neighbourhood. Example: y = −x² + 4 has greatest value 4 over all real x.
- Minimum. The least value within the specified domain or neighbourhood. Example: y = (x − 3)² + 2 has least value 2, attained at x = 3.
- Inequality. A comparison using signs such as <, >, ≤ or ≥. Example: (x − 1)(x − 4) < 0 holds when 1 < x < 4.
- Solution set. The complete collection of values satisfying a condition. Example: the real solution set of x² = 9 is {−3, 3}.
Keep exact forms until approximation is requested. Pay particular attention to square roots: √9 means 3, while the equation x² = 9 has two real solutions. The symbol and the equation perform different jobs.
- Rational number. A number expressible as a fraction of integers with a non-zero denominator. Example: 0.125 = 1/8 is rational.
- Irrational number. A real number that cannot be expressed as such a fraction. Example: √2 is irrational, even though a calculator displays a finite approximation.
- Surd. An irrational root of a rational number, retained in exact form. Example: √50 simplifies to 5√2 and remains a surd.
- Radicand. The expression inside a root sign. In √(x − 2), the radicand is x − 2; real values require x ≥ 2.
- Conjugate. For a two-term surd expression, the partner obtained by changing the sign between its terms. Example: (√5 + 2)(√5 − 2) = 1.
- Rationalise. Rewrite a fraction so its denominator contains no surd. Example: 1/(√3 + 1) = (√3 − 1)/2.
- Index. The exponent indicating a power. In 2⁴ = 16, the index is 4; for positive integers it describes repeated multiplication.
- Reciprocal. The multiplicative inverse of a non-zero number. Example: the reciprocal of 3/5 is 5/3 because their product is one.
- Negative index. An exponent expressing a reciprocal power. Example: x−2 = 1/x² for x ≠ 0, and 2−3 = 1/8.
- Fractional index. An exponent involving a root and possibly a power. Example: x3/2 = (√x)³ for x ≥ 0; 43/2 = 8.
CHAPTER 7 OF 20 · Learn the 100 terms
7. Words 41–50: polynomials, fractions and expansion
These terms support longer algebraic arguments. Write restrictions beside rational expressions, and distinguish the number of a term from the exponent used to generate that term in a binomial expansion.
- Factor theorem. For a polynomial f, x − a is a factor exactly when f(a) = 0. Example: f(2) = 0 establishes the factor x − 2.
- Remainder theorem. Dividing polynomial f(x) by x − a leaves remainder f(a). Example: x² + 3x + 4 leaves remainder 8 when divided by x − 1.
- Quotient. The result of division apart from any remainder. Example: dividing x² − 1 by x − 1 gives quotient x + 1 and remainder zero.
- Remainder. The portion left after division. Example: x² + 1 = (x − 1)(x + 1) + 2, so the remainder on division by x − 1 is 2.
- Partial fractions. Simpler fractions whose sum equals a rational expression. Example: (3x + 5)/[(x + 1)(x + 2)] = 2/(x + 1) + 1/(x + 2), with x ≠ −1, −2.
- Repeated linear factor. A first-degree factor occurring more than once. Example: a denominator (x − 1)² can require both A/(x − 1) and B/(x − 1)² in partial fractions.
- Binomial. An algebraic expression with two terms. Example: 1 + 2x is a binomial; its fourth power expands into five non-zero terms.
- Factorial. For a positive integer n, the product of integers from 1 to n. Example: 4! = 24; by convention, 0! = 1.
- Binomial coefficient. The number n!/[r!(n − r)!] used in a binomial expansion, for integers 0 ≤ r ≤ n. Example: choosing r = 2 and n = 4 gives 6.
- General term. A formula representing an indexed term. For positive integer n in (a + b)n, term r + 1 is n!an−rbr/[r!(n − r)!], with integer 0 ≤ r ≤ n.
CHAPTER 8 OF 20 · Learn the 100 terms
8. Words 51–60: functions, exponentials and logarithms
Functions connect inputs and outputs, while domains specify the permitted inputs. For real logarithms, use a positive argument and a base that is positive and different from one. State these conditions before manipulating equations.
- Function. A rule assigning exactly one output to each permitted input. Example: f(x) = x² gives output 4 when the input is either 2 or −2.
- Domain. The permitted input values for a function. Example: the real domain of f(x) = ln(x − 1) is x > 1.
- Range. The output values produced over the specified domain. Example: f(x) = x², for all real x, has range f(x) ≥ 0.
- Exponential function. A function with the variable in the exponent, commonly ax with a > 0 and a ≠ 1. Example: f(x) = 3x gives f(2) = 9.
- Logarithm. The exponent needed to obtain a number from a chosen base. Example: log28 = 3 because 2³ = 8.
- Base. The number raised to a power or used in a logarithm. Example: the base in log5125 is 5, and the logarithm equals 3.
- Natural logarithm. A logarithm to base e, written ln. Example: ln(e²) = 2. Its real argument must be positive.
- Logarithm law. A rule connecting logarithms of products, quotients or powers. Example: loga(uv) = logau + logav for u, v > 0 and valid base a.
- Change of base. Rewriting a logarithm using another valid base. Example: log232 = ln32/ln2 = 5.
- Asymptote. A line a graph approaches in the relevant limiting direction. Example: y = 0 is a horizontal asymptote of y = 2x as x decreases without bound.
Write the angle unit and the required interval before solving. A calculator’s inverse-trigonometric answer is a starting value. The question’s interval determines which other solutions must be considered.
- Radian. An angle unit defined through arc length divided by radius. Example: π radians equals 180°, so π/6 radians equals 30°.
- Sine. A trigonometric function; for an acute angle in a right triangle, opposite side divided by hypotenuse. Example: sin30° = 1/2.
- Cosine. A trigonometric function; for an acute angle in a right triangle, adjacent side divided by hypotenuse. Example: cos60° = 1/2.
- Tangent. The trigonometric ratio sinθ/cosθ where cosθ ≠ 0. Example: tan45° = 1. In geometry, the same word also describes a tangent line.
- Secant. In trigonometry, the reciprocal of cosine. Example: sec60° = 2. It is undefined when the corresponding cosine is zero.
- Cosecant. The reciprocal of sine, commonly written cosec. Example: cosec30° = 2. The sine must be non-zero.
- Cotangent. The ratio cosθ/sinθ where sinθ ≠ 0. Example: cot45° = 1. Check the domain before replacing one form with another.
- Amplitude. The distance from a sine or cosine graph’s midline to a maximum. Example: y = 3sin(2x) + 1 has amplitude 3.
- Period. The smallest positive input interval over which a periodic function repeats. Example: sin(2x) has period 180° when x is measured in degrees.
- Principal value. The particular value selected by an inverse trigonometric function. Example: sin−1(1/2) = 30°, although sin150° also equals 1/2.
CHAPTER 10 OF 20 · Learn the 100 terms
10. Words 71–80: coordinate and plane geometry
Describe both the object and its property. A gradient is a number; a line needs an equation; a point needs coordinates. A correct number can still be an incomplete response when the question requests a line or point.
- Gradient. The change in y divided by the change in x for a non-vertical straight line. Example: the line y = 3x − 2 has gradient 3.
- Intercept. Where a graph meets an axis. Example: y = 2x − 6 meets the x-axis at (3, 0) and the y-axis at (0, −6).
- Parallel. Describing distinct lines in a plane that do not meet. Example: y = 2x + 1 and y = 2x − 3 are parallel.
- Perpendicular. Meeting at a right angle. Example: lines with gradients 2 and −1/2 are perpendicular. Horizontal and vertical lines form another perpendicular pair.
- Midpoint. The point halfway along a line segment. Example: the midpoint between (1, 2) and (5, 8) is (3, 5).
- Distance. The non-negative separation between two points. Example: the distance from (0, 0) to (3, 4) is √(3² + 4²) = 5.
- Circle. The set of points in a plane at a fixed positive distance from a centre. Example: x² + y² = 9 describes a circle centred at (0, 0).
- Radius. The distance from a circle’s centre to any point on it. Example: (x − 2)² + (y + 1)² = 25 has radius 5.
- Tangent-chord theorem. The angle between a tangent and a chord equals the angle in the alternate segment. Example: a 42° tangent–chord angle gives the corresponding 42° angle at the circumference.
- Similar triangles. Triangles with equal corresponding angles and proportional corresponding sides. Example: a side-length scale factor of 2 produces an area scale factor of 4.
CHAPTER 11 OF 20 · Learn the 100 terms
11. Words 81–90: differentiation, when your course reaches it
This group is a preview if calculus is scheduled later at your school. Return to it with a graph and a worked example when the topic begins. Understanding what a derivative describes matters as much as carrying out the rule.
- Derivative. The instantaneous rate of change of a function, also the gradient of its tangent where defined. Example: for y = x², dy/dx = 2x.
- Rate of change. How one quantity changes relative to another. Example: for y = 3x + 2, both the average and instantaneous rate of change are 3.
- Differentiation. The process of finding a derivative. Example: differentiating x³ with respect to x gives 3x².
- Chain rule. A differentiation rule for a function within another function. Example: the derivative of (3x + 1)⁴ is 12(3x + 1)³.
- Product rule. The rule (uv)′ = u′v + uv′. Example: the derivative of x²ex is ex(2x + x²).
- Quotient rule. The rule (u/v)′ = (u′v − uv′)/v², where v ≠ 0. Example: differentiating (x + 1)/x gives −1/x².
- Stationary point. A point where the derivative exists and equals zero. Example: y = x³ has a stationary point at (0, 0), which is not a maximum or minimum.
- Second derivative. The derivative of the first derivative. Example: for y = x³, d²y/dx² = 6x. A zero second derivative alone does not classify a stationary point.
- Normal. A line perpendicular to a curve’s tangent at a specified point. Example: when the tangent gradient is 2, the normal gradient is −1/2.
- Point of inflexion. A point where the curve changes concavity. Example: y = x³ changes concavity at (0, 0). Such a point need not always be stationary.
CHAPTER 12 OF 20 · Learn the 100 terms
12. Words 91–100: integration and motion, when your course reaches them
These terms also belong to the later-course preview where appropriate. Write units beside quantities in motion questions. A negative velocity describes direction; a speed, which measures how fast something moves, is non-negative.
- Integration. A process used to recover antiderivatives and calculate accumulation. Example: integrating 2x with respect to x gives x² + C.
- Antiderivative. A function whose derivative is the given function. Example: x² is one antiderivative of 2x, and x² + 7 is another.
- Constant of integration. The arbitrary constant added when finding an indefinite integral on an interval. Example: ∫3x² dx = x³ + C.
- Indefinite integral. A family of antiderivatives, usually written with C. Example: ∫4x dx = 2x² + C.
- Definite integral. An integral evaluated between specified limits. Example: ∫012x dx = 1; the result is a number.
- Signed area. Area counted positively above the horizontal axis and negatively below it. Example: ∫01(−2) dx = −2, while the geometric area is 2.
- Displacement. The signed change in position relative to a chosen positive direction. Example: moving from position 7 m to position 3 m gives displacement −4 m.
- Velocity. The rate of change of displacement with time. Example: if s = t² metres, with t in seconds, then v = 2t metres per second.
- Speed. The magnitude of velocity. Example: a velocity of −5 m/s corresponds to a speed of 5 m/s.
- Acceleration. The rate of change of velocity with time. Example: if v = 3t − 2 metres per second, acceleration is 3 m/s².
CHAPTER 13 OF 20 · Practise and check
13. Worked examples: read the words before choosing a method
A. “Solve” includes checking the original equation
Consider √(x + 5) = x − 1. The square root is non-negative, so a solution must have x − 1 ≥ 0, or x ≥ 1. Squaring gives x + 5 = x² − 2x + 1, which rearranges to x² − 3x − 4 = 0. Factorising produces (x − 4)(x + 1) = 0.
The candidates are 4 and −1. Substituting x = 4 into the original equation gives 3 = 3. Substituting x = −1 gives 2 = −2, which is false. Therefore x = 4 is the solution. Squaring generated an extra candidate; the original condition and substitution remove it. This is why a familiar-looking quadratic should not distract you from the equation that produced it.
B. “Equal roots” gives a condition on a parameter
Find the values of k for which x² − 2kx + 4 = 0 has equal real roots. Identify a = 1, b = −2k and c = 4. The discriminant is (−2k)² − 4(1)(4) = 4k² − 16. Equal roots require this to be zero, so k² = 4 and k = 2 or −2.
Check the meaning. With k = 2, the equation becomes (x − 2)² = 0. With k = −2, it becomes (x + 2)² = 0. Both have equal roots. If the question also required the root to be positive, that additional condition would select k = 2. Every adjective in the question can change the final answer.
C. “In the interval” determines how many trigonometric answers are needed
Solve sin(2θ) = 1/2 for 0° ≤ θ ≤ 180°. First double the interval: 0° ≤ 2θ ≤ 360°. Within that interval, 2θ = 30° or 150°. Dividing both values by two gives θ = 15° or 75°.
A calculator’s principal value gives only the first starting angle. The second comes from the sine graph or the relevant quadrant relationship. Substitute both answers to check them. Keep degree symbols visible, and check that the calculator uses degrees for this particular question.
D. “Find the stationary points” requires coordinates and classification when requested
Use this example after learning differentiation. For y = x³ − 3x, the derivative is 3x² − 3. Setting it to zero gives x = −1 or 1. Substitution into y gives the points (−1, 2) and (1, −2). The second derivative is 6x, which is negative at −1 and positive at 1. The points are therefore a local maximum and a local minimum respectively.
The word local matters: this cubic has no greatest or least value over all real x. Reporting only x = −1 and 1 would also omit the y-coordinates if the question asked for the points. Vocabulary helps identify both the reasoning and the expected answer form.
E. “Distance travelled” differs from “displacement”
For a later calculus exercise, let v = 2t − 2 m/s for 0 ≤ t ≤ 3 seconds. Integrating velocity gives displacement [t² − 2t]03 = 3 m. However, velocity is negative before t = 1 and positive afterwards, so the particle changes direction.
The first part contributes a distance of 1 m and the second a distance of 4 m. Total distance is therefore 5 m. One answer describes the net change in position; the other counts the whole journey. Drawing a velocity–time sketch makes the sign change and the two areas easier to see.
Expression and equation: x² − 4 can be factorised, but it does not give a value of x until a condition is supplied. Writing x = ±2 without an equation silently adds information that was never given.
Identity and example: substituting x = 2 can check one case, but cannot prove an identity for all real x. For an algebraic identity, transform one side through valid equalities or establish an equivalent argument covering the claimed domain.
Square root and both roots: √(x²) = |x| for real x. If x = −3, the left side is √9 = 3, not −3. The absolute-value condition explains why cancelling a square and a square root needs care.
Logarithm of a product and a sum: loga(uv) can be split into two logarithms for positive u and v. There is no matching rule that splits loga(u + v). Test a proposed rule with small valid values before trusting it.
Inverse and reciprocal: sin−1x usually denotes inverse sine, while cosec x means 1/sin x. Read the notation in its context and keep the input type clear: an angle goes into sine, while an appropriate ratio goes into inverse sine.
Try these six prompts without looking back. They are original practice questions, not SEAB examination questions. Skip a prompt if its topic has not been taught, and return to it at the appropriate time.
Prompt A: In 2x² − 7x + 9, identify the coefficient of x and the constant term. Prompt B: Explain why x² − 4 is an expression, while x² − 4 = 0 is an equation. Prompt C: State the real domain of ln(x − 3).
Prompt D: Find the discriminant of x² + 4x + 4 = 0 and describe the roots. Prompt E: Find the third term of (1 + 2x)⁴ in ascending powers of x, using r = 0 for the first term. Prompt F: Explain why x = 30° alone is an incomplete solution of sin x = 1/2 for 0° ≤ x ≤ 180°.
Answers: A: the coefficient is −7 and the constant is 9. B: an expression names a quantity, whereas an equation asserts an equality that can be solved. C: x > 3 because the logarithm’s argument must be positive. D: 4² − 4(1)(4) = 0, so the roots are equal; the repeated root is −2.
For E, use r = 2: the binomial coefficient is 6, and 6(1²)(2x)² = 24x². The first three terms in this expansion order are 1, 8x and 24x². For F, x = 150° is also within the interval and has sine 1/2.
Read the explanation behind each error. Missing the minus sign in A suggests a coefficient or copying problem. Writing x ≥ 3 in C suggests confusion between a logarithm and a square root. Using r = 3 in E suggests an indexing problem. Each needs a different short repair exercise.
CHAPTER 16 OF 20 · Plan useful support
16. How a three-student vocabulary lesson could work
A useful small-group lesson lets every student reveal an individual line of reasoning. Here is a possible 60-minute lesson structure, offered as a teaching example rather than a claim about current class availability or a fixed timetable.
Spend the opening eight minutes on independent retrieval: each student explains four terms from the current chapter and completes one small calculation. The tutor then compares the errors. One student may know the definition but mishandle signs; another may calculate accurately after a prompt but struggle to choose the method.
Use twelve minutes to connect two easily confused terms, such as root and minimum. Students draw a quadratic, label its roots and vertex, and explain what each label means. Follow with fifteen minutes of guided questions in which each student takes a turn explaining one decision. Rotate the roles of solver, question reader and checker.
The next fifteen minutes should be independent application with the prompts reduced. Finish with ten minutes of correction and a brief exit explanation. Ask, “Which condition did you check, and what could have gone wrong without it?” A useful exit answer identifies a specific condition, such as x > 1 in a logarithm problem, and explains its purpose.
Three students sharing a table does not automatically ensure that all three understand. The important evidence is what each can explain and complete without a neighbour’s method. Keep one individual question at the end so that a fluent group discussion does not hide a quiet student’s uncertainty.
CHAPTER 17 OF 20 · Plan useful support
17. A four-week plan that follows the school chapter
Week one: establish meaning. Select ten relevant terms rather than trying to cover the whole list. Write a short definition, a correct example and a common mistake for each. Begin each session by explaining three terms with the notebook closed. Reopen it to check and correct the explanation.
Week two: connect words to decisions. Use the same terms in short questions. Underline the command and circle any interval or domain restriction. After solving, write one sentence explaining the choice of method. For example: “I used the discriminant because the question asks when the quadratic has equal roots.”
Week three: mix familiar question types. Put a factorisation task beside an equation, a graph question and a question requiring a condition. The student must decide what is being requested. Keep the set short enough to inspect every error, and add five terms from the next relevant group only when the earlier ones are usable.
Week four: check independence. Repeat a few earlier questions with changed numbers and add an unfamiliar application. Compare the student’s explanation, working and checking with week one. Record which terms are secure, which need reminders and which remain unclear. This is a planning record, not a predicted examination grade.
A workable home session might contain three minutes of recall, eight minutes of questions and four minutes of correction. Adjust the duration to the workload and the student’s concentration. If a method remains confusing, reduce the number of new terms and ask the teacher or tutor to revisit the prerequisite instead of adding more pages.
CHAPTER 18 OF 20 · Plan useful support
18. Parent support: repair, stabilise or extend
When the student is falling behind, choose the earliest unclear step. Ask the student to read the question and explain what it requests before doing calculations. If the difficulty begins with fractions or negative numbers, spend time there. The next useful goal may be one correctly explained factorisation, rather than a complete advanced worksheet.
When performance is uneven, compare two examples of the same skill. Does the student recognise the method only when a chapter heading supplies a clue? Mix a few question types and ask for a reason before calculation. Keep a record of repeated errors in interpretation, algebra, signs, domains and final answer form.
When the student is ready to progress, deepen the explanation. Ask for a second method, a counterexample to a false claim, or the conditions under which a rule holds. For instance, challenge “a zero derivative always means a turning point” with y = x³. Extension can mean greater precision without moving into an untaught chapter.
Parents do not need to remember every formula. Questions such as “What does that term mean here?”, “Which condition are you using?” and “How could you check this?” keep the discussion useful. Bring the student’s actual working to a teacher or tutor when the explanation breaks down; a final mark alone gives less information.
Must a student memorise all 100 terms immediately?
No. Treat the list as a reference and select the terms needed for the current chapter. A student should be able to explain and apply a smaller group before adding more. The calculus entries can wait until the school programme reaches those ideas.
Can students use their own words in definitions?
Yes, provided the mathematical meaning and conditions remain accurate. “A root makes the polynomial equal zero” is useful. “A root is where something turns” confuses a root with a turning point. Ask for an example to make the intended meaning clear.
Will learning vocabulary by itself improve every result?
Vocabulary supports interpretation and explanation, but students also need accurate algebra, mathematical understanding and practice. If a student reads a question correctly yet repeatedly makes fraction errors, the practice plan should address those errors directly.
Is this the same list as ordinary Mathematics vocabulary?
There is shared language, including gradient, equation and similar triangles. This selection develops the language around Additional Mathematics work, including discriminants, logarithms, polynomial theorems and later calculus. Keep the two subjects’ school materials clearly labelled.
How should we choose help for a specific difficulty?
Bring two or three marked questions, the current chapter and the student’s explanation of where the method became unclear. Ask how the teaching will address that difficulty and how independent progress will be checked. Check current arrangements directly before making any decision about tuition.
What is a sensible next step today?
Choose five words from the chapter currently being taught. Explain each without reading, complete one related question and correct one misunderstanding. End with a sentence that names the condition or method you used. A small amount of precise work gives the next lesson something concrete to build on.
CHAPTER 20 OF 20 · Find answers and sources
20. Official references and further reading
Curriculum references checked on 16 November 2026: SEAB’s 2027 G3 subject index; the 2027 G3 Additional Mathematics syllabus K341; and SEAB’s SEC overview. Use the examination-year syllabus and the school’s current information for formal requirements.
For a broader explanation of how vocabulary supports learning across secondary school, continue with Making Sense of Vocabulary in Secondary School, Full SBB and SEC English. Return to the current Mathematics chapter with one clearer definition and one example you can explain independently.
